Effect of Ethylene Oxide and Gamma (γ-) Sterilization on the Properties of a PLCL Polymer Material in Balloon Implants
Open accessThe DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Abstract Poly-l-lactide-co-ε-caprolactone (PLCL) is a unique polymer containing both polylactic acid and poly-ε-caprolactone (PCL) chain units, and thus it has better flexible and biodegradable properties. Based on these unique properties of PLCL, we have developed balloons that are now widely used in treating major medical problems [Biomaterials 2016, 105, 109–116]. One of the most important considerations needed for balloons is to ensure that the material properties remain similar after undergoing ethylene oxide (EtO) or gamma (γ-) sterilization treatments. From the biotechnological point of view, we focused on analyzing the vital molecular properties of the PLCL material after sterilization, such as changes in crystallinity, molecular weight distributions (Mw, Mn, and polydispersity index), and inherent viscosity (η). Analysis of the data reveals that EtO sterilization does not engender any change in crystallinity, melting temperature (Tm), molecular weights, and η of the polymer. On the contrary, γ-radiations induce chain scission and consequential decrease of ∼33 and ∼15% in molecular weights and η values, respectively. Based on our observations, we recommend EtO sterilization instead of γ-radiation for PLCL. This ensures prolonged stability of the polymer against degradation in a biological environment, long-shelf life, and absolute assurance that balloon failures do not occur after implantation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
FTIR study of polycaprolactone chain organization at interfaces
Elzein, T., Nasser-Eddine, M., Delaite, C., Bistac, S., & Dumas, P. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.02.001 · Cited by 814
Enthalpy Relaxation and Embrittlement of Poly( l -lactide) during Physical Aging
Pan, P., Zhu, B., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071737c · Cited by 282
Sterilization of implantable polymer-based medical devices: A review
Tipnis, N. P., & Burgess, D. J. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.12.003 · Cited by 233
Jeong, S. I., Kim, B.-S., Lee, Y. M., Ihn, K. J., Kim, S. H., & Kim, Y. H. (2004) · Biomacromolecules · doi:10.1021/bm049921i · Cited by 182
Senekovic, V., Poberaj, B., Kovacic, L., Mikek, M., Adar, E., & Dekel, A. (2013) · European Journal of Orthopaedic Surgery & Traumatology · doi:10.1007/s00590-012-0981-4 · Cited by 154
The influence of temperature on the degradation rate of lactosorb copolymer
Pietrzak, W. S., Kumar, M., & Eppley, B. L. (2003) · Journal of Craniofacial Surgery · doi:10.1097/00001665-200303000-00008 · Cited by 44
Cited by
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Chausse, V., Iglesias, C., Bou-Petit, E., Ginebra, M.-P., & Pegueroles, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2022.107817 · Cited by 39
Application of PLCL as a biodegradable polymer in biomedical engineering
Zhao, Y., & Liu, H. (2026) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-026-07016-3 · Cited by 7
Metadata
- Authors
- Haim Zada, M., Kumar, A., Elmalak, O., Mechrez, G., & Domb, A. J.
- Venue
- ACS Omega
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-12-03
- Volume
- 4
- Issue
- 25
- Pages
- 21319-21326
- ISSN
- 2470-1343 (ISSN-L)
- OpenAlex
- W2992832892
- Cited by
- 37
- References
- 8
- FWCI
- 0.88
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of Ethylene Oxide and Gamma (γ-) Sterilization on the Properties of a PLCL Polymer Material in Balloon Implants. https://app.cochat.ai/papers/10.1021/acsomega.9b02889
- The paper
- Haim Zada, M., Kumar, A., Elmalak, O., Mechrez, G., & Domb, A. J. (2019). Effect of Ethylene Oxide and Gamma (γ-) Sterilization on the Properties of a PLCL Polymer Material in Balloon Implants. ACS Omega. https://doi.org/10.1021/acsomega.9b02889
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.