Integrated PbS Colloidal Quantum Dot Photodiodes on Silicon Nitride Waveguides
Open accessThe DOI matches its Crossref record; 70 of the 72 references it cites were found in a registry or an index; 6 of the 41 sources its claims cite were checked for support.
Abstract
Colloidal quantum dots (QDs) have become a versatile optoelectronic material for emitting and detecting light that can overcome the limitations of a range of electronic and photonic technology platforms. Photonic integrated circuits (PICs), for example, face the persistent challenge of combining active materials with passive circuitry ideally suited for guiding light. Here, we demonstrate the integration of photodiodes (PDs) based on PbS QDs on silicon nitride waveguides (WG). Analyzing planar QDPDs first, we argue that the main limitation WG-coupled QDPDs face is detector saturation induced by the high optical power density of the guided light. Using the cladding thickness and waveguide width as design parameters, we mitigate this issue, and we demonstrate WG-QDPDs with an external quantum efficiency of 67.5% at 1275 nm that exhibit a linear photoresponse for input powers up to 400 nW. In the next step, we demonstrate a compact infrared spectrometer by integrating these WG-QDPDs on the output channels of an arrayed waveguide grating demultiplexer. This work provides a path toward a low-cost PD solution for PICs, which are attractive for large-scale production.
Overview
CoChat Summary
## TL;DR
The paper demonstrates the first integration of PbS colloidal quantum dot photodiodes on silicon nitride waveguides using standard fabrication techniques. By tuning waveguide width and cladding thickness, the authors achieved a waveguide-coupled device with 67.5% EQE at 1275 nm and linear response up to 400 nW, and used it to build an 8-channel on-chip infrared spectrometer.
## Key findings
- Planar bottom-illuminated QDPDs showed a dark current of 70 nA at −1 V and an EQE of 16% at 0.12 mW total illumination power; their saturation power density was defined as 5.2 W/cm².
- For WG-QDPDs, the best devices achieved an average EQE of 67.5% in the 6–60 nW range at 1275 nm, with a responsivity of 0.69 A/W and linear response up to 400 nW at −1 V.
- The optimized waveguide-integrated design used a 30 μm waveguide width and 350 nm cladding thickness; the paper says this should yield a saturation power of up to 6.9 μW, with a modeled loss of 623 dB/cm, 95% absorption in a 200 μm-long device, and a maximally attainable EQE of 82%.
- An integrated 8-channel AWG spectrometer covered a 51 nm wavelength range with 7.3 nm channel spacing and measured channel crosstalk better than 15 dB.
## Methods
- The study combined planar bottom-illuminated QDPDs with waveguide-integrated QDPDs on a 300 nm SiN waveguide layer; the waveguide device stack used ZnO/Al2O3/PbS QD/Au layers.
- Fabrication used standard microfabrication methods including PECVD SiN deposition, EBL, RIE, ALD of ZnO and Al2O3, photolithography, wet etching, and liftoff; QD films were patterned and assembled from PbS-PbI2 and PbS-EDT layers.
- Devices were characterized with a Keithley 2450 source meter and an O-band tunable laser, measuring current-voltage curves, EQE, saturation behavior, and spectral response; waveguide power was calibrated using reference waveguides without QDPDs.
## Limitations
- The paper states a trade-off between saturation threshold and dark current: increasing waveguide width or cladding thickness raises saturation power but requires longer detectors, which increases dark current.
- The measured WG-QDPD saturation power of 400 nW was about 1 order of magnitude smaller than the predicted 6.9 μW, which the paper attributes to differences between the idealized simulation structure and the fabricated device, including possible contamination and defects.
- Evident from the text: several claims about scalability and wafer-scale fabrication are prospective rather than demonstrated here, because the authors note that photolithography could be used and foundry-style integration could be possible, but this paper’s devices were fabricated with lab-processed waveguides and EBL.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
1 Valid · 4 Not valid · 22 Not checked · 82 Own results and interpretations
Some cited sources support this claim and some don’t — read each source’s verdict below.
In the paper
“Most of the photodetectors integrated on SiN waveguides reported in literature were based on bonded or transfer-printed III–V semiconductors,37,53 Ge monolithically grown on Si,54,55 and two-dimensional materials,56,57 approaches that result in increased integration complexity.”
§ Integrated PbS Colloidal Quantum Dot Photodiodes on Silicon Nitride Waveguides > Discussion Most of the photodetectors integrated on SiN waveguides reported in literature were based on bonded or transfer-printed III–V semiconductors,37,53 Ge monolithically grown on Si,54,55 and two-dimensional materials,56,57 approaches that result in increased integration complexity. Integration of evaporated amorphous58 and polycrystalline59 photoconductors has also been demonstrated, offering promising pathways for less complex heterogeneous integration. However, such photoconductors have been associated with the observation of a notable dark current and low detectivity,58,59 attributed to the inherent photoconductor mechanism. Here, we have demonstrated the formation of QD-based photodiodes on SiN waveguides by means of standard film deposition and patterning techniques. These WG-QDPDs exhibit a lower dark current (2.4 nA at −1 V) than most of the previously demonstrated photodetectors. In addition, our WG-QDPDs demonstrate a high responsivity of 0.69 A/W at around 1.3 μm, which is comparable to, or even better than, reported waveguide-coupled PDs.53,55,60 Moreover, the use of QDs as active material offers the benefits of a low-cost material, compatibility with standard fabrication techniques, ease of processing, and scalability toward higher volume production. These features make WG-QDPDs attractive for low-cost, low-power, and noise-sensitive applications. Finally, planar QDPDs have been demonstrated to exhibit a response time as short as 10 ns.7 However, this fast response time has been observed only in small pixel devices, indicating that the response time is primarily limited by the resistance-capacitance (RC) product. In this respect, WG-QDPDs, with their smaller active area and consequently reduced capacitance, hold great potential for achieving even faster response times. In more detail, the capacitance of our WG-QDPD is expected to approximate 15 pF, considering a dielectric constant of 34,7 a device area of 6000 μm2, and a QD layer thickness of 120 nm. With a load resistance of 50 Ω, the RC limited response time (10–90% rise time, calculated as 2.2·RC) is estimated to be 1.7 ns. Although in this work E-beam lithography was used for patterning the QD layer and the p-contact metal, nothing prevents the use of photolithography as an alternative,61,62 enabling the fabrication of WG-QDPDs on the wafer scale with high throughput. Furthermore, the process used to integrate PbS QDPDs on the SiN waveguide platform can be extended to other QD materials and photonic integrated platforms. For the silicon-on-insulator (SOI) platform, monolithically integrated Ge detectors are the preferred solution for wavelengths below 1.6 μm. However, for longer wavelengths, there is still no straightforward integrated solution. Larger PbS QDs can have absorption onsets beyond 2 μm, and other materials like HgTe QDs can even work in the mid-infrared range.63,64 These QDs can be good candidates for integration on SOI or Ge-on-Si PIC platforms targeting longer wavelength ranges.65,66 For other platforms such as flexible photonics, which meet with similar challenges of integrating active components, QDPDs are also a promising candidate. While the saturation power of WG-QDPDs is better than that of two-dimensional materials photodetectors,57 it is still not on par with III–V or Ge photodetectors, which have saturation powers exceeding 1 mW.53,67 Hence, a significant enhancement of the saturation power is needed to make WG-QDPDs competitive in this way, a step that is contingent upon better fabrication techniques and the design and operation of the QDPD stack. For the fabrication, we believe that minimizing damage to the QD and transport material films, as well as ensuring cleaner interfaces, could significantly enhance the performance of WG-QDPDs, bringing them closer to that of planar QDPDs. For the QDPD stack, however, limited literature is available on the origin of the detector saturation. Possibly, the low saturation power of PbS QDPDs compared with epitaxial PDs, is related to a high series resistance induced by the low mobility of the QDs film. As a result, higher carrier densities are needed to sustain a given photocurrent. More generally, however, the results presented here call for a better understanding of detector saturation in QDPDs. Benefiting from the wide tunability of the QD absorption spectrum, the concept of computational spectrometers based on the wavelength multiplexing principle68 has emerged as a compelling option. In this scheme, hundreds of QDs, each characterized by a distinct absorption spectrum, function as specialized filters that randomly sample the desired spectrum. Subsequent computational techniques enable the reconstruction of the sampled data. A key departure from traditional spectrometers, including the one exemplified in our current study, is that the inherent trade-off between resolution and bandwidth becomes obsolete in the realm of computational spectrometry. The integration of QD-based computational spectrometers into integrated photonics also holds substantial promise. However, a series of potential challenges need to be overcome, such as the efficiency and yield concerns of multistep QD deposition, effectively controlling QD absorption behavior, and realizing low-loss and broadband power splitters.
What the sources say
- Not checked — no full text of the sourcecites [37] source
- Partly supportedcites [53] sourceExperimental — accuracy not yet measured
Split into 2 atoms — 0 confirmed, 2 partially supported, 0 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
- Not checked — no full text of the sourcecites [54] source
- Partly supportedcites [55] sourceExperimental — accuracy not yet measured
Split into 2 atoms — 0 confirmed, 1 partially supported, 0 disputed, 0 misattributed, 1 unverifiable. Expand the claim to see per-atom verdicts.
- Disputedcites [56] sourceExperimental — accuracy not yet measured
Split into 2 atoms — 0 confirmed, 1 partially supported, 1 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
Checked by a reasoning model — may be wrong.
- Disputedcites [57] sourceExperimental — accuracy not yet measured
Split into 2 atoms — 1 confirmed, 0 partially supported, 1 disputed, 0 misattributed, 0 unverifiable. Expand the claim to see per-atom verdicts.
Checked by a reasoning model — may be wrong.
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources that could be checked couldn’t confirm or dispute this claim.
In the paper
“current IR-sensitive QDPDs based on PbS QDs can attain an external quantum efficiency (EQE) of 80%,7”
§ Integrated PbS Colloidal Quantum Dot Photodiodes on Silicon Nitride Waveguides > Introduction Colloidal quantum dots (QDs) are emerging as a promising class of semiconductors for a wide range of optoelectronic applications. Examples including light emitting diodes (LED),1,2 lasers,3−5 solar cells,6 and photodetectors7,8 are enabled by QDs offering a combination of an efficient emission and pronounced absorption tunable from visible to infrared wavelengths,9 low-cost chemical synthesis, solution-based processing, and compatibility with different substrates.10 Following the rapid material development and the improved understanding of QD-based devices,9 interest is moving to the integration of QDs in established optoelectronic technology platforms. QDs have, for example, been included as color convertors in liquid crystal and micro-LED displays11,12 and combined with a driver backplane for electroluminescent displays13,14 or a readout backplane for infrared imagers.15,16 QDs can be equally attractive for integration with photonic integrated circuits (PICs), where the low cost, ease of processing, and compatibility with a wide range of substrates are appealing with respect to other integration approaches. Indeed, while the monolithic epitaxial growth of semiconductors on PICs has the advantage of high throughput and low cost, substrate compatibility remains a major challenge.17 Heterogeneous integration technology based on wafer or die bonding is well developed and has led to commercial products, but the approach requires large-area planarized surfaces and makes use of costly III–V epitaxy and bonding technology.18,19 Assembly-based hybrid integration technologies, such as flip-chip integration and transfer printing, offer excellent compatibility between diverse material platforms, yet complex processing and throughput remain to be demonstrated.18,20,21 Silicon nitride (SiN) is a promising integrated photonics platform characterized by a low propagation loss, high power handling capability, a broad transparency window, and compatibility with processing in CMOS fabs.22 Applications of SiN-based integrated photonics range from lidar23−25 to biosensing26−28 and quantum photonics.29−31 However, the integration of active components into SiN remains a challenge. Leveraging their excellent substrate compatibility and patterning flexibility, solution-processed materials have been introduced into the SiN photonics platform for different purposes, for example, as gain material for lasers4,32,33 and as single photon emitter.34−36 However, most of these devices are driven optically. Integration in SiN of electrically driven devices, such as infrared (IR) photodetectors, has only been achieved by heterogeneous or hybrid methods involving bonding37 or transfer printing.38 Given the limitations of these approaches mentioned above, QD-based photodiodes (QDPDs) offer an appealing alternative for IR detection on SiN. Building on extensive research into QD solar cells, current IR-sensitive QDPDs based on PbS QDs can attain an external quantum efficiency (EQE) of 80%,7 a response time of 10 ns7, a dark current density of 2.9 × 10–5 mA cm–2, and a detectivity of 6.7 × 1012 Jones at 980 nm.39 Moreover, spectral sensitivity has been demonstrated up to 1.55 μm7 and even up to 3 μm.40 These levels of efficiency and detectivity have led to the first commercial introduction of IR imagers based on a PbS QDPDs pixel array.15 A similar integration of distinct QDPDs on PICs could enable complex functionality, such as pocket spectrometers for sensing or compact wavelength division multiplexing (WDM) receivers for datacom applications. However, the integration of QDPDs on waveguides and PICs is still in its infancy. A first prototype involving a CdSe QDPD on a SiN waveguide was demonstrated by Elsinger et al., but this QDPD was only sensitive to visible light, had a modest external quantum efficiency of 6% at best, and featured a strongly sublinear response to light intensity.41 Clearly, such issues need to be addressed for QDPDs to become widely deployed as IR detectors on SiN-integrated photonics. In this work, we demonstrate the integration in SiN waveguides of a QDPD consisting of two films of PbS QDs, with surfaces functionalized by lead iodide (PbI2) and ethanedithiol (EDT), respectively, stacked on a ZnO electron transport layer. After analyzing the power-dependent saturation of the photocurrent by means of a bottom-illuminated, planar QDPD, we first map the design parameters of an integrated QDPD that would ensure a linear power response at relevant power levels. Next, we show that the relatively simple three-layer QDPD stack can be integrated on SiN strip waveguides. Using a waveguide width and cladding thickness that keeps the QDPD operating within the linear regime, we show a responsivity of 0.69 A/W, corresponding to an EQE of ∼67.5% at 1275 nm, and a linear response for illumination powers up to 400 nW at −1 V bias. Interestingly, this EQE is significantly better than that of the planar stack, probably due to the better absorbance of light incident parallel to the surface of the integrated QDPD. As a final step, we demonstrate a QDPD array integrated with an eight-channel arrayed waveguide grating (AWG) demultiplexer, which works as a compact infrared spectrometer. This first demonstration of integrating multiple QDPDs to create an on-chip spectroscopic system provides a promising route for mass integration of QDPDs in complex photonic ICs applicable in a wide range of applications.
What the sources say
- Could not verifycites [7] sourceExperimental — accuracy not yet measured
Every retrieval from our copy of Vafaie et al. (Matter 2021, DOI 10.1016/j.matt.2020.12.017) returns only reference-hub link boilerplate (sref37-sref42, unsectioned, no page), so no passage of the article's body text is available to us. We searched 'external quantum efficiency', 'external quantum efficiency 80% at 1550 nm', 'PbS colloidal quantum dot photodetector EQE state of the art', 'previous PbS photodetectors reported EQE limited telecom wavelength', and 'PbS colloidal quantum dots photodetector telecom optical fiber communication'; none surfaced a statement about EQE attainable by IR-sensitive PbS QD photodetectors. The paper's headline figure (80% quantum efficiency at 1,550 nm) appears only in its title metadata, not in any indexed passage, so the attributed claim can be neither confirmed nor contradicted from our copy. (LLM, conf=0.60)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“While the saturation power of WG-QDPDs is better than that of two-dimensional materials photodetectors,57”
§ Integrated PbS Colloidal Quantum Dot Photodiodes on Silicon Nitride Waveguides > Discussion Most of the photodetectors integrated on SiN waveguides reported in literature were based on bonded or transfer-printed III–V semiconductors,37,53 Ge monolithically grown on Si,54,55 and two-dimensional materials,56,57 approaches that result in increased integration complexity. Integration of evaporated amorphous58 and polycrystalline59 photoconductors has also been demonstrated, offering promising pathways for less complex heterogeneous integration. However, such photoconductors have been associated with the observation of a notable dark current and low detectivity,58,59 attributed to the inherent photoconductor mechanism. Here, we have demonstrated the formation of QD-based photodiodes on SiN waveguides by means of standard film deposition and patterning techniques. These WG-QDPDs exhibit a lower dark current (2.4 nA at −1 V) than most of the previously demonstrated photodetectors. In addition, our WG-QDPDs demonstrate a high responsivity of 0.69 A/W at around 1.3 μm, which is comparable to, or even better than, reported waveguide-coupled PDs.53,55,60 Moreover, the use of QDs as active material offers the benefits of a low-cost material, compatibility with standard fabrication techniques, ease of processing, and scalability toward higher volume production. These features make WG-QDPDs attractive for low-cost, low-power, and noise-sensitive applications. Finally, planar QDPDs have been demonstrated to exhibit a response time as short as 10 ns.7 However, this fast response time has been observed only in small pixel devices, indicating that the response time is primarily limited by the resistance-capacitance (RC) product. In this respect, WG-QDPDs, with their smaller active area and consequently reduced capacitance, hold great potential for achieving even faster response times. In more detail, the capacitance of our WG-QDPD is expected to approximate 15 pF, considering a dielectric constant of 34,7 a device area of 6000 μm2, and a QD layer thickness of 120 nm. With a load resistance of 50 Ω, the RC limited response time (10–90% rise time, calculated as 2.2·RC) is estimated to be 1.7 ns. Although in this work E-beam lithography was used for patterning the QD layer and the p-contact metal, nothing prevents the use of photolithography as an alternative,61,62 enabling the fabrication of WG-QDPDs on the wafer scale with high throughput. Furthermore, the process used to integrate PbS QDPDs on the SiN waveguide platform can be extended to other QD materials and photonic integrated platforms. For the silicon-on-insulator (SOI) platform, monolithically integrated Ge detectors are the preferred solution for wavelengths below 1.6 μm. However, for longer wavelengths, there is still no straightforward integrated solution. Larger PbS QDs can have absorption onsets beyond 2 μm, and other materials like HgTe QDs can even work in the mid-infrared range.63,64 These QDs can be good candidates for integration on SOI or Ge-on-Si PIC platforms targeting longer wavelength ranges.65,66 For other platforms such as flexible photonics, which meet with similar challenges of integrating active components, QDPDs are also a promising candidate. While the saturation power of WG-QDPDs is better than that of two-dimensional materials photodetectors,57 it is still not on par with III–V or Ge photodetectors, which have saturation powers exceeding 1 mW.53,67 Hence, a significant enhancement of the saturation power is needed to make WG-QDPDs competitive in this way, a step that is contingent upon better fabrication techniques and the design and operation of the QDPD stack. For the fabrication, we believe that minimizing damage to the QD and transport material films, as well as ensuring cleaner interfaces, could significantly enhance the performance of WG-QDPDs, bringing them closer to that of planar QDPDs. For the QDPD stack, however, limited literature is available on the origin of the detector saturation. Possibly, the low saturation power of PbS QDPDs compared with epitaxial PDs, is related to a high series resistance induced by the low mobility of the QDs film. As a result, higher carrier densities are needed to sustain a given photocurrent. More generally, however, the results presented here call for a better understanding of detector saturation in QDPDs. Benefiting from the wide tunability of the QD absorption spectrum, the concept of computational spectrometers based on the wavelength multiplexing principle68 has emerged as a compelling option. In this scheme, hundreds of QDs, each characterized by a distinct absorption spectrum, function as specialized filters that randomly sample the desired spectrum. Subsequent computational techniques enable the reconstruction of the sampled data. A key departure from traditional spectrometers, including the one exemplified in our current study, is that the inherent trade-off between resolution and bandwidth becomes obsolete in the realm of computational spectrometry. The integration of QD-based computational spectrometers into integrated photonics also holds substantial promise. However, a series of potential challenges need to be overcome, such as the efficiency and yield concerns of multistep QD deposition, effectively controlling QD absorption behavior, and realizing low-loss and broadband power splitters.
What the sources say
- Partly supportedcites [57] sourceExperimental — accuracy not yet measured
The Results and discussion section reports that the MoSe₂/WS₂ photodiode’s responsivity falls as incident power rises and that it saturates even at nominal powers. This supports the characterization of a two-dimensional-material detector as susceptible to saturation, but the paper does not compare its saturation power with that of WG-QDPDs. (LLM, conf=0.82)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“that exhibit a linear photoresponse for input powers up to 400 nW.”
- Also stated in: § Introduction Colloidal quantum dots (QDs) are emerging as a promising class of semiconductors for a wide range of optoelectronic applications. Examples including light emitting diodes (LED),1,2 lasers,3−5 solar cells,6 and photodetectors7,8 are enabled by QDs offering a combination of an efficient emission and pronounced absorption tunable from visible to infrared wavelengths,9 low-cost chemical synthesis, solution-based processing, and compatibility with different substrates.10 Following the rapid material development and the improved understanding of QD-based devices,9 interest is moving to the integration of QDs in established optoelectronic technology platforms. QDs have, for example, been included as color convertors in liquid crystal and micro-LED displays11,12 and combined with a driver backplane for electroluminescent displays13,14 or a readout backplane for infrared imagers.15,16 QDs can be equally attractive for integration with photonic integrated circuits (PICs), where the low cost, ease of processing, and compatibility with a wide range of substrates are appealing with respect to other integration approaches. Indeed, while the monolithic epitaxial growth of semiconductors on PICs has the advantage of high throughput and low cost, substrate compatibility remains a major challenge.17 Heterogeneous integration technology based on wafer or die bonding is well developed and has led to commercial products, but the approach requires large-area planarized surfaces and makes use of costly III–V epitaxy and bonding technology.18,19 Assembly-based hybrid integration technologies, such as flip-chip integration and transfer printing, offer excellent compatibility between diverse material platforms, yet complex processing and throughput remain to be demonstrated.18,20,21 Silicon nitride (SiN) is a promising integrated photonics platform characterized by a low propagation loss, high power handling capability, a broad transparency window, and compatibility with processing in CMOS fabs.22 Applications of SiN-based integrated photonics range from lidar23−25 to biosensing26−28 and quantum photonics.29−31 However, the integration of active components into SiN remains a challenge. Leveraging their excellent substrate compatibility and patterning flexibility, solution-processed materials have been introduced into the SiN photonics platform for different purposes, for example, as gain material for lasers4,32,33 and as single photon emitter.34−36 However, most of these devices are driven optically. Integration in SiN of electrically driven devices, such as infrared (IR) photodetectors, has only been achieved by heterogeneous or hybrid methods involving bonding37 or transfer printing.38 Given the limitations of these approaches mentioned above, QD-based photodiodes (QDPDs) offer an appealing alternative for IR detection on SiN. Building on extensive research into QD solar cells, current IR-sensitive QDPDs based on PbS QDs can attain an external quantum efficiency (EQE) of 80%,7 a response time of 10 ns7, a dark current density of 2.9 × 10–5 mA cm–2, and a detectivity of 6.7 × 1012 Jones at 980 nm.39 Moreover, spectral sensitivity has been demonstrated up to 1.55 μm7 and even up to 3 μm.40 These levels of efficiency and detectivity have led to the first commercial introduction of IR imagers based on a PbS QDPDs pixel array.15 A similar integration of distinct QDPDs on PICs could enable complex functionality, such as pocket spectrometers for sensing or compact wavelength division multiplexing (WDM) receivers for datacom applications. However, the integration of QDPDs on waveguides and PICs is still in its infancy. A first prototype involving a CdSe QDPD on a SiN waveguide was demonstrated by Elsinger et al., but this QDPD was only sensitive to visible light, had a modest external quantum efficiency of 6% at best, and featured a strongly sublinear response to light intensity.41 Clearly, such issues need to be addressed for QDPDs to become widely deployed as IR detectors on SiN-integrated photonics. In this work, we demonstrate the integration in SiN waveguides of a QDPD consisting of two films of PbS QDs, with surfaces functionalized by lead iodide (PbI2) and ethanedithiol (EDT), respectively, stacked on a ZnO electron transport layer. After analyzing the power-dependent saturation of the photocurrent by means of a bottom-illuminated, planar QDPD, we first map the design parameters of an integrated QDPD that would ensure a linear power response at relevant power levels. Next, we show that the relatively simple three-layer QDPD stack can be integrated on SiN strip waveguides. Using a waveguide width and cladding thickness that keeps the QDPD operating within the linear regime, we show a responsivity of 0.69 A/W, corresponding to an EQE of ∼67.5% at 1275 nm, and a linear response for illumination powers up to 400 nW at −1 V bias. Interestingly, this EQE is significantly better than that of the planar stack, probably due to the better absorbance of light incident parallel to the surface of the integrated QDPD. As a final step, we demonstrate a QDPD array integrated with an eight-channel arrayed waveguide grating (AWG) demultiplexer, which works as a compact infrared spectrometer. This first demonstration of integrating multiple QDPDs to create an on-chip spectroscopic system provides a promising route for mass integration of QDPDs in complex photonic ICs applicable in a wide range of applications. · plain
“a linear response for illumination powers up to 400 nW at −1 V bias.”
§ Integrated PbS Colloidal Quantum Dot Photodiodes on Silicon Nitride Waveguides > Abstract
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § Introduction Colloidal quantum dots (QDs) are emerging as a promising class of semiconductors for a wide range of optoelectronic applications. Examples including light emitting diodes (LED),1,2 lasers,3−5 solar cells,6 and photodetectors7,8 are enabled by QDs offering a combination of an efficient emission and pronounced absorption tunable from visible to infrared wavelengths,9 low-cost chemical synthesis, solution-based processing, and compatibility with different substrates.10 Following the rapid material development and the improved understanding of QD-based devices,9 interest is moving to the integration of QDs in established optoelectronic technology platforms. QDs have, for example, been included as color convertors in liquid crystal and micro-LED displays11,12 and combined with a driver backplane for electroluminescent displays13,14 or a readout backplane for infrared imagers.15,16 QDs can be equally attractive for integration with photonic integrated circuits (PICs), where the low cost, ease of processing, and compatibility with a wide range of substrates are appealing with respect to other integration approaches. Indeed, while the monolithic epitaxial growth of semiconductors on PICs has the advantage of high throughput and low cost, substrate compatibility remains a major challenge.17 Heterogeneous integration technology based on wafer or die bonding is well developed and has led to commercial products, but the approach requires large-area planarized surfaces and makes use of costly III–V epitaxy and bonding technology.18,19 Assembly-based hybrid integration technologies, such as flip-chip integration and transfer printing, offer excellent compatibility between diverse material platforms, yet complex processing and throughput remain to be demonstrated.18,20,21 Silicon nitride (SiN) is a promising integrated photonics platform characterized by a low propagation loss, high power handling capability, a broad transparency window, and compatibility with processing in CMOS fabs.22 Applications of SiN-based integrated photonics range from lidar23−25 to biosensing26−28 and quantum photonics.29−31 However, the integration of active components into SiN remains a challenge. Leveraging their excellent substrate compatibility and patterning flexibility, solution-processed materials have been introduced into the SiN photonics platform for different purposes, for example, as gain material for lasers4,32,33 and as single photon emitter.34−36 However, most of these devices are driven optically. Integration in SiN of electrically driven devices, such as infrared (IR) photodetectors, has only been achieved by heterogeneous or hybrid methods involving bonding37 or transfer printing.38 Given the limitations of these approaches mentioned above, QD-based photodiodes (QDPDs) offer an appealing alternative for IR detection on SiN. Building on extensive research into QD solar cells, current IR-sensitive QDPDs based on PbS QDs can attain an external quantum efficiency (EQE) of 80%,7 a response time of 10 ns7, a dark current density of 2.9 × 10–5 mA cm–2, and a detectivity of 6.7 × 1012 Jones at 980 nm.39 Moreover, spectral sensitivity has been demonstrated up to 1.55 μm7 and even up to 3 μm.40 These levels of efficiency and detectivity have led to the first commercial introduction of IR imagers based on a PbS QDPDs pixel array.15 A similar integration of distinct QDPDs on PICs could enable complex functionality, such as pocket spectrometers for sensing or compact wavelength division multiplexing (WDM) receivers for datacom applications. However, the integration of QDPDs on waveguides and PICs is still in its infancy. A first prototype involving a CdSe QDPD on a SiN waveguide was demonstrated by Elsinger et al., but this QDPD was only sensitive to visible light, had a modest external quantum efficiency of 6% at best, and featured a strongly sublinear response to light intensity.41 Clearly, such issues need to be addressed for QDPDs to become widely deployed as IR detectors on SiN-integrated photonics. In this work, we demonstrate the integration in SiN waveguides of a QDPD consisting of two films of PbS QDs, with surfaces functionalized by lead iodide (PbI2) and ethanedithiol (EDT), respectively, stacked on a ZnO electron transport layer. After analyzing the power-dependent saturation of the photocurrent by means of a bottom-illuminated, planar QDPD, we first map the design parameters of an integrated QDPD that would ensure a linear power response at relevant power levels. Next, we show that the relatively simple three-layer QDPD stack can be integrated on SiN strip waveguides. Using a waveguide width and cladding thickness that keeps the QDPD operating within the linear regime, we show a responsivity of 0.69 A/W, corresponding to an EQE of ∼67.5% at 1275 nm, and a linear response for illumination powers up to 400 nW at −1 V bias. Interestingly, this EQE is significantly better than that of the planar stack, probably due to the better absorbance of light incident parallel to the surface of the integrated QDPD. As a final step, we demonstrate a QDPD array integrated with an eight-channel arrayed waveguide grating (AWG) demultiplexer, which works as a compact infrared spectrometer. This first demonstration of integrating multiple QDPDs to create an on-chip spectroscopic system provides a promising route for mass integration of QDPDs in complex photonic ICs applicable in a wide range of applications. · plain
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“we demonstrate a QDPD array integrated with an eight-channel arrayed waveguide grating (AWG) demultiplexer, which works as a compact infrared spectrometer.”
§ Integrated PbS Colloidal Quantum Dot Photodiodes on Silicon Nitride Waveguides > Introduction Colloidal quantum dots (QDs) are emerging as a promising class of semiconductors for a wide range of optoelectronic applications. Examples including light emitting diodes (LED),1,2 lasers,3−5 solar cells,6 and photodetectors7,8 are enabled by QDs offering a combination of an efficient emission and pronounced absorption tunable from visible to infrared wavelengths,9 low-cost chemical synthesis, solution-based processing, and compatibility with different substrates.10 Following the rapid material development and the improved understanding of QD-based devices,9 interest is moving to the integration of QDs in established optoelectronic technology platforms. QDs have, for example, been included as color convertors in liquid crystal and micro-LED displays11,12 and combined with a driver backplane for electroluminescent displays13,14 or a readout backplane for infrared imagers.15,16 QDs can be equally attractive for integration with photonic integrated circuits (PICs), where the low cost, ease of processing, and compatibility with a wide range of substrates are appealing with respect to other integration approaches. Indeed, while the monolithic epitaxial growth of semiconductors on PICs has the advantage of high throughput and low cost, substrate compatibility remains a major challenge.17 Heterogeneous integration technology based on wafer or die bonding is well developed and has led to commercial products, but the approach requires large-area planarized surfaces and makes use of costly III–V epitaxy and bonding technology.18,19 Assembly-based hybrid integration technologies, such as flip-chip integration and transfer printing, offer excellent compatibility between diverse material platforms, yet complex processing and throughput remain to be demonstrated.18,20,21 Silicon nitride (SiN) is a promising integrated photonics platform characterized by a low propagation loss, high power handling capability, a broad transparency window, and compatibility with processing in CMOS fabs.22 Applications of SiN-based integrated photonics range from lidar23−25 to biosensing26−28 and quantum photonics.29−31 However, the integration of active components into SiN remains a challenge. Leveraging their excellent substrate compatibility and patterning flexibility, solution-processed materials have been introduced into the SiN photonics platform for different purposes, for example, as gain material for lasers4,32,33 and as single photon emitter.34−36 However, most of these devices are driven optically. Integration in SiN of electrically driven devices, such as infrared (IR) photodetectors, has only been achieved by heterogeneous or hybrid methods involving bonding37 or transfer printing.38 Given the limitations of these approaches mentioned above, QD-based photodiodes (QDPDs) offer an appealing alternative for IR detection on SiN. Building on extensive research into QD solar cells, current IR-sensitive QDPDs based on PbS QDs can attain an external quantum efficiency (EQE) of 80%,7 a response time of 10 ns7, a dark current density of 2.9 × 10–5 mA cm–2, and a detectivity of 6.7 × 1012 Jones at 980 nm.39 Moreover, spectral sensitivity has been demonstrated up to 1.55 μm7 and even up to 3 μm.40 These levels of efficiency and detectivity have led to the first commercial introduction of IR imagers based on a PbS QDPDs pixel array.15 A similar integration of distinct QDPDs on PICs could enable complex functionality, such as pocket spectrometers for sensing or compact wavelength division multiplexing (WDM) receivers for datacom applications. However, the integration of QDPDs on waveguides and PICs is still in its infancy. A first prototype involving a CdSe QDPD on a SiN waveguide was demonstrated by Elsinger et al., but this QDPD was only sensitive to visible light, had a modest external quantum efficiency of 6% at best, and featured a strongly sublinear response to light intensity.41 Clearly, such issues need to be addressed for QDPDs to become widely deployed as IR detectors on SiN-integrated photonics. In this work, we demonstrate the integration in SiN waveguides of a QDPD consisting of two films of PbS QDs, with surfaces functionalized by lead iodide (PbI2) and ethanedithiol (EDT), respectively, stacked on a ZnO electron transport layer. After analyzing the power-dependent saturation of the photocurrent by means of a bottom-illuminated, planar QDPD, we first map the design parameters of an integrated QDPD that would ensure a linear power response at relevant power levels. Next, we show that the relatively simple three-layer QDPD stack can be integrated on SiN strip waveguides. Using a waveguide width and cladding thickness that keeps the QDPD operating within the linear regime, we show a responsivity of 0.69 A/W, corresponding to an EQE of ∼67.5% at 1275 nm, and a linear response for illumination powers up to 400 nW at −1 V bias. Interestingly, this EQE is significantly better than that of the planar stack, probably due to the better absorbance of light incident parallel to the surface of the integrated QDPD. As a final step, we demonstrate a QDPD array integrated with an eight-channel arrayed waveguide grating (AWG) demultiplexer, which works as a compact infrared spectrometer. This first demonstration of integrating multiple QDPDs to create an on-chip spectroscopic system provides a promising route for mass integration of QDPDs in complex photonic ICs applicable in a wide range of applications.
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
64 more claims
Create a free account to see all 109 claims and to verify the 16 references still open.
- It may state two separate claims as one. 25
- Probably not a substantial claim. 22
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“a phenomenon attributed to QDPD saturation due to high series resistance, as observed in prior studies. 34”
From A silicon photonics waveguide-coupled colloidal quantum dot photodiode sensitive beyond 1.6 µ m (2024) · cites this paper as [34]
Experimental — accuracy not yet measured
Citations
Cites
Solution-processed, high-performance light-emitting diodes based on quantum dots
Dai, X., Zhang, Z., Jin, Y., Niu, Y., Cao, H., Liang, X., Chen, L., Wang, J., & Peng, X. (2014) · Nature · doi:10.1038/nature13829 · Cited by 2,702
Improved performance and stability in quantum dot solar cells through band alignment engineering
Chuang, C.-H. M., Brown, P. R., Bulović, V., & Bawendi, M. G. (2014) · Nature Materials · doi:10.1038/nmat3984 · Cited by 1,795
Building devices from colloidal quantum dots
Kagan, C. R., Lifshitz, E., Sargent, E. H., & Talapin, D. V. (2016) · Science · doi:10.1126/science.aac5523 · Cited by 1,404 · cited 2×
“…1,2 lasers, 3 − 5 solar cells, 6 and photodetectors 7,8 are enabled by QDs offering a combination of an efficient emission and pronounced absorption tunable from visible to infrared wavelengths, 9 low-cost chemical synthesis, solution-based processing, and compatibility with different substrates.”
InfluentialA colloidal quantum dot spectrometer
Bao, J., & Bawendi, M. G. (2015) · Nature · doi:10.1038/nature14576 · Cited by 735
Micro-light-emitting diodes with quantum dots in display technology
Liu, Z., Lin, C.-H., Hyun, B.-R., Sher, C.-W., Lv, Z., Luo, B., Jiang, F., Wu, T., Ho, C.-H., Kuo, H.-C., et al. (2020) · Light: Science & Applications · doi:10.1038/s41377-020-0268-1 · Cited by 663 · cited 1×
“QDs have, for example, been included as color convertors in liquid crystal and micro-LED displays 11,12 and combined with a driver backplane for electroluminescent displays 13,14 or a readout backplane for infrared imagers.”
Air-stable n-type colloidal quantum dot solids
Ning, Z., Voznyy, O., Pan, J., Hoogland, S., Adinolfi, V., Xu, J., Li, M., Kirmani, A. R., Sun, J.-P., Minor, J., et al. (2014) · Nature Materials · doi:10.1038/nmat4007 · Cited by 619
Mid-infrared HgTe colloidal quantum dot photodetectors
Keuleyan, S., Lhuillier, E., Brajuskovic, V., & Guyot-Sionnest, P. (2011) · Nature Photonics · doi:10.1038/nphoton.2011.142 · Cited by 503 · cited 1×
“63,64 These QDs can be good candidates for integration on SOI or Ge-on-Si PIC platforms targeting longer wavelength ranges.”
Park, Y.-S., Roh, J., Diroll, B. T., Schaller, R. D., & Klimov, V. I. (2021) · Nature Reviews Materials · doi:10.1038/s41578-020-00274-9 · Cited by 421
Flexible quantum dot light-emitting diodes for next-generation displays
Choi, M. K., Yang, J., Hyeon, T., & Kim, D.-H. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0023-3 · Cited by 399
Large-scale silicon nitride nanophotonic phased arrays at infrared and visible wavelengths
Poulton, C. V., Byrd, M. J., Raval, M., Su, Z., Li, N., Timurdogan, E., Coolbaugh, D., Vermeulen, D., & Watts, M. R. (2017) · Optics Letters · doi:10.1364/ol.42.000021 · Cited by 314
Cited by
A silicon photonics waveguide-coupled colloidal quantum dot photodiode sensitive beyond 1.6 µ m
Pang, C., Deng, Y.-H., Kheradmand, E., Hagelsieb, L. M., Guo, Y., Cheyns, D., Geiregat, P., Hens, Z., & Van Thourhout, D. (2024) · APL Photonics · doi:10.1063/5.0206386 · Cited by 9
Self-citationMicro-transfer printing of O-band InGaAs/InP photodiodes on a silicon nitride photonic platform
Qin, S., Bogaert, L., Reniers, S. F. G., Jiao, Y., Zhang, J., Bauwelinck, J., & Roelkens, G. (2025) · Optics Express · doi:10.1364/oe.563685 · Cited by 11
Operando investigation of nanocrystal-based device energy landscape: Seeing the current pathway
Cavallo, M., Mastrippolito, D., Bossavit, E., Curti, L., Khalili, A., Zhang, H., Ledos, N., Prado, Y., Dandeu, E., Rosticher, M., et al. (2024) · Nano Research · doi:10.1007/s12274-024-6622-5 · Cited by 7
Tanghe, I., Vandekerckhove, T., Samoli, M., Waters, A. B., Harankahage, D., Zamkov, M. A., Hens, Z., Seassal, C., Nguyen, H. S., Thourhout, D. V., et al. (2024) · ACS Photonics · doi:10.1021/acsphotonics.4c01410 · Cited by 9
Self-citationXiang, H., Liu, J., Zhao, X., Yu, L., Li, Y., Guo, J., Gao, L., Tang, J., & Dai, D. (2025) · Photonics Research · doi:10.1364/prj.567718 · Cited by 7
Hooshiar, M. H., Hooshiar, J. H., & Hooshiar, S. H. (2026) · Discover Nano · doi:10.1186/s11671-026-04483-z · Cited by 9
“Also, QD heterogeneous integration in silicon nitride waveguides obtains external quantum efficiencies of 67.5% at 1275 nm [20–22].”
InfluentialQu, J., Peng, 刘. L., Xuetao, 甘. G., & Jianlin, 赵. Z. (2024) · Acta Optica Sinica · doi:10.3788/aos241121 · Cited by 5
Bismuth Chalcohalide Bi 13 S 18 Br 2 for Fast and Sensitive Near‐Infrared Photodetection
Wang, Y., Sun, Z., & Mei, B. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202423515 · Cited by 4
Enhancement in Optical and Dielectric Properties of Quantum Dots Doped Cholesteric Liquid Crystal
., P., Sharma, V., Kumar, P., et al. (2025) · Engineering materials · doi:10.1007/978-981-96-3821-5_13 · Cited by 1
LI, Z., Luo, Y., Liu, Z., Tang, X., Li, Y., Ding, N., You, M., Wang, M., Pan, Q., Li, K. H., et al. (2025) · Optics Express · doi:10.1364/oe.581982 · Cited by 2
Thermal Spin Coated PbS QD SWIR Imager for Non‐Invasive Glucose Monitoring
Rao, L., Cheng, S., Chen, Q., Wang, J., Ma, J., Hao, J., Sun, X. W., Chen, W., Ning, C., & Tang, H. (2026) · Advanced Science · doi:10.1002/advs.75944 · Cited by 2
“These properties make PbS QDs highly attractive for emerging applications such as spectrometers, night vision, environmental sensing, and non-destructive inspection systems [ 7–10 ].”
Research progress of waveguide integrated carbon based infrared detectors
Xiaowei, L. Y. U., Zhang, J., Junyu, C., Zizhuo, L., Wenchao, Z., Qiushi, W., Xu, H., & Xiaoshuang, C. H. E. N. (2025) · Acta Physica Sinica · doi:10.7498/aps.74.20250830
Photocurrent Saturation Mechanisms in Colloidal Quantum Dot Photodetectors
Molkens, K., Deng, Y., Kheradmand, E., Thourhout, D. V., Hens, Z., & Geiregat, P. (2026) · Nano Letters · doi:10.1021/acs.nanolett.6c01775
Self-citationLuan, T., Sang, L., Long, Y., et al. (2026) · Optics Letters · doi:10.1364/ol.606404
Jingshu, 郭. G., Zhekai, 朱. Z., Xiang, H., Zheng, Y., Junhuan, 李. L., Leyi, 胡. H., Liu, L., Shi, Y., & Dai, D. (2026) · Acta Optica Sinica · doi:10.3788/aos260673
Heterogeneously integrated III-V photodiodes on ultra-thin silicon nitride waveguides
Tabatabaei, F., Liu, K., Wang, J., Guo, X., Song, M., Vithoulkas, A., Keyes, T., Chawlani, R., Nelson, K., Blumenthal, D. J., et al. (2026) · Optics Express · doi:10.1364/oe.604900 · Cited by 1
Metadata
- Authors
- Pang, C., Deng, Y.-H., Kheradmand, E., Poonkottil, N., Petit, R., Elsinger, L., Detavernier, C., Geiregat, P., Hens, Z., & Van Thourhout, D.
- Affiliations
- Ghent University (BE)
- Photonics Research Group, Ghent University - imec, 9052 Ghent, Belgium
- Venue
- ACS Photonics
- Publisher
- American Chemical Society (ACS)
- Published
- 2023-11-20
- Volume
- 10
- Issue
- 12
- Pages
- 4215-4224
- ISSN
- 2330-4022 (ISSN-L)
- PMC
- PMC10741659
- OpenAlex
- W4388841251
- Cited by
- 16
- References
- 72
- Citations by year
- 2026: 6 · 2025: 6 · 2024: 4
- FWCI
- 1.13
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- ACS Photonics (publishedVersion, cc-by-nc-nd)
- PubMed (publishedVersion)
- Ghent University Academic Bibliography (Ghent University) (publishedVersion)
- Ghent University Academic Bibliography (Ghent University) (submittedVersion, other-oa)
- PubMed Central (submittedVersion, cc-by-nc-nd)
- Funders
- Fonds Wetenschappelijk Onderzoek (G0B2921N, G0C5723N)
- China Scholarship Council (201906120023)
- Bijzonder Onderzoeksfonds UGent (GOA01019)
- H2020 European Research Council (884963)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Quantum Dots Synthesis And Properties
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photonic Crystals and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
- Keywords
- PbS colloidal quantum dots, silicon nitride waveguides, photonic integrated circuits, detector saturation, external quantum efficiency, infrared spectrometer
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (qwen3.8-omni-flash and gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.