The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
High-Performance Flexible Perovskite Solar Cells by Using a Combination of Ultrasonic Spray-Coating and Low Thermal Budget Photonic Curing
Open accessAbstract
Realizing the commercialization of high-performance and robust perovskite solar cells urgently requires the development of economically scalable processing techniques. Here we report a high-throughput ultrasonic spray-coating (USC) process capable of fabricating perovskite film-based solar cells on glass substrates with a power conversion efficiency (PCE) as high as 13%. Perovskite films with high uniformity, crystallinity, and surface coverage are obtained in a single step. Moreover, we report USC processing on TiO 2 /ITO-coated polyethylene terephthalate (PET) substrates to realize flexible perovskite solar cells with a PCE as high as 8.1% that are robust under mechanical stress. In this case, a photonic curing technique was used to achieve a highly conductive TiO 2 layer on flexible PET substrates for the first time. The high device performance and reliability obtained by this combination of USC processing with optical curing appear very promising for roll-to-roll manufacturing of high-efficiency, flexible perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Anomalous Hysteresis in Perovskite Solar Cells
Snaith, H. J., Abate, A., Ball, J. M., Eperon, G. E., Leijtens, T., Noel, N. K., Stranks, S. D., Wang, J. T.-W., Wojciechowski, K., & Zhang, W. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500113x · Cited by 2,465
Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process
Chen, Q., Zhou, H., Hong, Z., Luo, S., Duan, H.-S., Wang, H.-H., Liu, Y., Li, G., & Yang, Y. (2014) · Journal of the American Chemical Society · doi:10.1021/ja411509g · Cited by 2,306
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Xiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405334 · Cited by 1,630
Perovskite solar cells employing organic charge-transport layers
Malinkiewicz, O., Yella, A., Lee, Y. H., Espallargas, G. M., Graetzel, M., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.341 · Cited by 1,474
Xiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234
Krebs, F. C., Gevorgyan, S. A., & Alstrup, J. (2009) · Journal of Materials Chemistry · doi:10.1039/b823001c · Cited by 1,229
Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition
Barrows, A. T., Pearson, A. J., Kwak, C. K., Dunbar, A. D. F., Buckley, A. R., & Lidzey, D. G. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01546k · Cited by 765
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie · doi:10.1002/ange.201405334 · Cited by 714
Heterojunction Modification for Highly Efficient Organic–Inorganic Perovskite Solar Cells
Wojciechowski, K., Stranks, S. D., Abate, A., Sadoughi, G., Sadhanala, A., Kopidakis, N., Rumbles, G., Li, C.-Z., Friend, R. H., Jen, A. K.-Y., et al. (2014) · ACS Nano · doi:10.1021/nn505723h · Cited by 677
Nguyen, W. H., Bailie, C. D., Unger, E. L., & McGehee, M. D. (2014) · Journal of the American Chemical Society · doi:10.1021/ja504539w · Cited by 611
High Photovoltaic Performance of Inkjet Printed Polymer:Fullerene Blends
Hoth, C. N., Choulis, S. A., Schilinsky, P., & Brabec, C. J. (2007) · Advanced Materials · doi:10.1002/adma.200700911 · Cited by 513
Efficient and Uniform Planar‐Type Perovskite Solar Cells by Simple Sequential Vacuum Deposition
Chen, C., Kang, H., Hsiao, S., Yang, P., Chiang, K., & Lin, H. (2014) · Advanced Materials · doi:10.1002/adma.201402461 · Cited by 510
Wei, Z., Chen, H., Yan, K., & Yang, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408638 · Cited by 456
Tenent, R. C., Barnes, T. M., Bergeson, J. D., Ferguson, A. J., To, B., Gedvilas, L. M., Heben, M. J., & Blackburn, J. L. (2009) · Advanced Materials · doi:10.1002/adma.200803551 · Cited by 422
Printing Highly Efficient Organic Solar Cells
Hoth, C. N., Schilinsky, P., Choulis, S. A., & Brabec, C. J. (2008) · Nano Letters · doi:10.1021/nl801365k · Cited by 414
Kim, J. H., Williams, S. T., Cho, N., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401229 · Cited by 366
3D Printer Based Slot‐Die Coater as a Lab‐to‐Fab Translation Tool for Solution‐Processed Solar Cells
Vak, D., Hwang, K., Faulks, A., Jung, Y., Clark, N., Kim, D., Wilson, G. J., & Watkins, S. E. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401539 · Cited by 265
Chen, Y., Chen, T., & Dai, L. (2015) · Advanced Materials · doi:10.1002/adma.201404147 · Cited by 237
High‐Performance Organic Solar Cells with Spray‐Coated Hole‐Transport and Active Layers
Girotto, C., Moia, D., Rand, B. P., & Heremans, P. L. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001562 · Cited by 218
Thin‐Film Fabrication Method for Organic Light‐Emitting Diodes Using Electrospray Deposition
Ju, J., Yamagata, Y., & Higuchi, T. (2009) · Advanced Materials · doi:10.1002/adma.200900444 · Cited by 110
Lefort, M., Popa, G., Seyrek, E., Szamocki, R., Félix, O., Hemmerlé, J., Vidal, L., Voegel, J., Boulmedais, F., Decher, G., et al. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201002729 · Cited by 88
Shao, M., Das, S., Xiao, K., Chen, J., Keum, J. K., Ivanov, I. N., Gu, G., Durant, W., Li, D., & Geohegan, D. B. (2013) · Journal of Materials Chemistry C · doi:10.1039/c3tc30535j · Cited by 33
Self-citation
Cited by
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
High-efficiency robust perovskite solar cells on ultrathin flexible substrates
Li, Y., Meng, L., Yang, Y., Xu, G., Hong, Z., Chen, Q., You, J., Li, G., Yang, Y., & Li, Y. (2016) · Nature Communications · doi:10.1038/ncomms10214 · Cited by 680
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Yoon, J., Sung, H., Lee, G., Cho, W., Ahn, N., Jung, H. S., & Choi, M. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02650h · Cited by 469
Flexible Perovskite Solar Cells
Jung, H. S., Han, G. S., Park, N.-G., & Ko, M. J. (2019) · Joule · doi:10.1016/j.joule.2019.07.023 · Cited by 449
Metadata
- Authors
- Das, S., Yang, B., Gu, G., Joshi, P. C., Ivanov, I. N., Rouleau, C. M., Aytug, T., Geohegan, D. B., & Xiao, K.
- Venue
- ACS Photonics
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-05-27
- Volume
- 2
- Issue
- 6
- Pages
- 680-686
- ISSN
- 2330-4022 (ISSN-L)
- OpenAlex
- W2289137680
- Cited by
- 312
- References
- 33
- FWCI
- 20.21
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.