Micropyrolysis of Polyethylene and Polypropylene Prior to Bioconversion: The Effect of Reactor Temperature and Vapor Residence Time on Product Distribution
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
The rapid thermal degradation of olefin plastics is a promising chemical recycling technology to create useful products from waste plastics. In this study, pyrolysis vapors from polyethylene (HDPE and LDPE) and polypropylene were subjected to secondary degradation using a new two-stage micropyrolysis reactor (TSMR) accessory to a commercial micropyrolysis unit. Variations in reactor temperature (550–600 °C) and vapor residence time (VRT) (1.4–5.6 s) showed a strong effect on the product distribution, which was comprised of mostly alkene hydrocarbons over a broad carbon number range, with minor production of alkanes and alkadienes. On the basis of the generated micropyrolysis data, a very practical lumped kinetic model comprised of 10 reactions and 6 lumped “species” was created to describe the plastic pyrolysis and to understand how temperature and VRT turn the product distribution into different product classes of compounds (plastic, wax, heavy oil, light oil, gas, and aromatics). The kinetic parameters, such as the activation energy and frequency factor, were solved for using the method of least squares. The presented kinetic model shows good agreement with the data and with known degradation mechanisms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Tran, N. H., Urase, T., Ngo, H. H., Hu, J., & Ong, S. L. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.07.083 · Cited by 482
Biofilm development of the polyethylene-degrading bacterium rhodococcus ruber
Sivan, A., Szanto, M., & Pavlov, V. (2006) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-005-0259-4 · Cited by 415
The three stages in degradation of polymers—polyethylene as a model substance
Albertsson, A., & Karlsson, S. (1988) · Journal of Applied Polymer Science · doi:10.1002/app.1988.070350515 · Cited by 194
Cited by
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Kulas, D. G., Zolghadr, A., Chaudhari, U. S., & Shonnard, D. R. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135542 · Cited by 83
Self-citationSchaerer, L. G., Wu, R., Putman, L. I., Pearce, J. M., Lu, T., Shonnard, D. R., Ong, R. G., & Techtmann, S. M. (2023) · Trends in Biotechnology · doi:10.1016/j.tibtech.2022.06.012 · Cited by 52
Self-citationHasan, M. M., Rasul, M. G., Jahirul, M. I., & Sattar, M. A. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.120557 · Cited by 52
Metadata
- Authors
- Kulas, D. G., Zolghadr, A., & Shonnard, D.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-10-22
- Volume
- 9
- Issue
- 43
- Pages
- 14443-14450
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W3208438267
- Cited by
- 43
- References
- 4
- FWCI
- 1.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Micropyrolysis of Polyethylene and Polypropylene Prior to Bioconversion: The Effect of Reactor Temperature and Vapor Residence Time on Product Distribution. https://app.cochat.ai/papers/10.1021/acssuschemeng.1c04705
- The paper
- Kulas, D. G., Zolghadr, A., & Shonnard, D. (2021). Micropyrolysis of Polyethylene and Polypropylene Prior to Bioconversion: The Effect of Reactor Temperature and Vapor Residence Time on Product Distribution. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.1c04705
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.