High-Performance Magnetic Activated Carbon from Solid Waste from Lignin Conversion Processes. 1. Their Use As Adsorbents for CO2
Open accessThe DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Abstract
Lignin is naturally abundant and a renewable precursor with the potential to be used in the production of both chemicals and materials. As many lignin conversion processes suffer from a significant production of solid wastes in the form of hydrochars, this study focused on transforming hydrochars into magnetic activated carbons (MAC). The hydrochars were produced via hydrothermal treatment of lignins together with formic acid. The activation of the hydrochars was performed chemically with KOH with a focus on the optimization of the MACs as adsorbents for CO 2 . MACs are potentially relevant to carbon capture and storage (CCS) and gas purification processes. In general, the MACs had high specific surface areas (up to 2875 m 2 /g), high specific pore volumes, and CO 2 adsorption capacities of up to 6.0 mmol/g (1 atm, 0 °C). The textual properties of the MACs depended on the temperature of the activation. MACs activated at a temperature of 700 °C had very high ultramicropore volumes, which are relevant for potential adsorption-driven separation of CO 2 from N 2 . Activation at 800 °C led to MACs with larger pores and very high specific surface areas. This temperature-dependent optimization option, combined with the magnetic properties, provided numerous potential applications of the MACs besides those of CCS. The hydrochar was derived from eucalyptus lignin, and the corresponding MACs displayed soft magnetic behavior with coercivities of <100 Oe and saturation magnetization values of 1–10 emu/g.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
An Amine-Functionalized MIL-53 Metal−Organic Framework with Large Separation Power for CO 2 and CH 4
Couck, S., Denayer, J. F. M., Baron, G. V., Rémy, T., Gascon, J., & Kapteijn, F. (2009) · Journal of the American Chemical Society · doi:10.1021/ja900555r · Cited by 988
The preparation of active carbons from coal by chemical and physical activation
Ahmadpour, A., & Do, D. D. (1996) · Carbon · doi:10.1016/0008-6223(95)00204-9 · Cited by 763
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Self-citationCazetta, A. L., Pezoti, O., Bedin, K. C., Silva, T. L., Paesano Junior, A., Asefa, T., & Almeida, V. C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01141 · Cited by 312
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Activated carbons prepared from hydrothermally carbonized waste biomass used as adsorbents for CO2
Hao, W., Björkman, E., Lilliestråle, M., & Hedin, N. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.02.028 · Cited by 277
Self-citationHigh-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Cited by
Cao, L., Yu, I. K. M., Liu, Y., Ruan, X., Tsang, D. C. W., Hunt, A. J., Ok, Y. S., Song, H., & Zhang, S. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.08.065 · Cited by 410
Lignin materials for adsorption: Current trend, perspectives and opportunities
Supanchaiyamat, N., Jetsrisuparb, K., Knijnenburg, J. T. N., Tsang, D. C. W., & Hunt, A. J. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2018.09.139 · Cited by 378
Ahmed, R., Liu, G., Yousaf, B., Abbas, Q., Ullah, H., & Ali, M. U. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118409 · Cited by 349
CO2 capture by adsorption on biomass-derived activated char: A review.
Goel, C., Mohan, S., & Dinesha, P. (2021) · Science of the Total Environment · doi:10.1016/j.scitotenv.2021.149296 · Cited by 206
Yuan, X., Lee, J. G., Yun, H., Deng, S., Kim, Y. J., Lee, J. E., Kwak, S. K., & Lee, K. B. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125350 · Cited by 194
Metadata
- Authors
- Hao, W., Björnerbäck, F., Trushkina, Y., Oregui Bengoechea, M., Salazar-Alvarez, G., Barth, T., & Hedin, N.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-03-17
- Volume
- 5
- Issue
- 4
- Pages
- 3087-3095
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2593958662
- Cited by
- 78
- References
- 12
- FWCI
- 9.28
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High-Performance Magnetic Activated Carbon from Solid Waste from Lignin Conversion Processes. 1. Their Use As Adsorbents for CO2. https://app.cochat.ai/papers/10.1021/acssuschemeng.6b02795
- The paper
- Hao, W., Björnerbäck, F., Trushkina, Y., Oregui Bengoechea, M., Salazar-Alvarez, G., Barth, T., & Hedin, N. (2017). High-Performance Magnetic Activated Carbon from Solid Waste from Lignin Conversion Processes. 1. Their Use As Adsorbents for CO2. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.6b02795
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.