The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Electrochemical Synthesis of NH3 at Low Temperature and Atmospheric Pressure Using a γ-Fe2O3 Catalyst
Abstract
The electrochemical synthesis of NH 3 by the nitrogen reduction reaction (NRR) at low temperature (<65 °C) and atmospheric pressure using nanosized γ-Fe 2 O 3 electrocatalysts were demonstrated. The activity and selectivity of the catalyst was investigated both in a 0.1 M KOH electrolyte and when incorporated into an anion-exchange membrane electrode assembly (MEA). In a half-reaction experiment conducted in a KOH electrolyte, the γ-Fe 2 O 3 electrode presented a faradaic efficiency of 1.9% and a weight-normalized activity of 12.5 nmol h –1 mg –1 at 0.0 V RHE . However, the selectivity toward N 2 reduction decreased at more negative potentials owing to the competing proton reduction reaction. When the γ-Fe 2 O 3 nanoparticles were coated onto porous carbon paper to form an electrode for a MEA, their weight-normalized activity for N 2 reduction was found to increase dramatically to 55.9 nmol h –1 mg –1 . However, the weight- and area-normalized N 2 reduction activities of γ-Fe 2 O 3 decreased progressively from 35.9 to 14.8 nmol h –1 mg –1 and from 0.105 to 0.043 nmol h –1 cm –2 act, respectively, during a 25 h MEA durability test. In summary, a study of the fundamental behavior and catalytic activity of γ-Fe 2 O 3 nanoparticles in the electrochemical synthesis of NH 3 under low temperature and pressure is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Licht, S., Cui, B., Wang, B., Li, F.-F., Lau, J., & Liu, S. (2014) · Science · doi:10.1126/science.1254234 · Cited by 753
RetractedAnalysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials
Yamashita, T., & Hayes, P. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2007.09.063 · Cited by 6,673
Montoya, J. H., Tsai, C., Vojvodic, A., & Nørskov, J. K. (2015) · ChemSusChem · doi:10.1002/cssc.201500322 · Cited by 1,384
Bao, D., Zhang, Q., Meng, F., Zhong, H., Shi, M., Zhang, Y., Yan, J., Jiang, Q., & Zhang, X. (2017) · Advanced Materials · doi:10.1002/adma.201604799 · Cited by 1,164
Sheng, W., Zhuang, Z., Gao, M., Zheng, J., Chen, J. G., & Yan, Y. (2015) · Nature Communications · doi:10.1038/ncomms6848 · Cited by 1,136
Shi, M., Bao, D., Wulan, B., Li, Y., Zhang, Y., Yan, J., & Jiang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201606550 · Cited by 917
Review of electrochemical ammonia production technologies and materials
Giddey, S., Badwal, S. P. S., & Kulkarni, A. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.09.054 · Cited by 886
Recent progress towards the electrosynthesis of ammonia from sustainable resources
Shipman, M. A., & Symes, M. D. (2017) · Catalysis Today · doi:10.1016/j.cattod.2016.05.008 · Cited by 762
Ammonia Synthesis at Atmospheric Pressure
Marnellos, G., & Stoukides, M. (1998) · Science · doi:10.1126/science.282.5386.98 · Cited by 665
Kordali, V., Kyriacou, G., & Lambrou, C. (2000) · Chemical Communications · doi:10.1039/b004885m · Cited by 475
Synthesis of ammonia directly from air and water at ambient temperature and pressure
Lan, R., Irvine, J. T. S., & Tao, S. (2013) · Scientific Reports · doi:10.1038/srep01145 · Cited by 416
Solid-state electrochemical synthesis of ammonia: a review
Amar, I. A., Lan, R., Petit, C. T. G., & Tao, S. (2011) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-011-1376-x · Cited by 321
Ma, Z., Huang, X., Dou, S., Wu, J., & Wang, S. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp502226j · Cited by 318
Kugler, K., Luhn, M., Schramm, J. A., Rahimi, K., & Weßling, M. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05501b · Cited by 151
Synthesis of Ammonia at Atmospheric Pressure with the Use of Solid State Proton Conductors
Marnellos, G. E., Zisekas, S., & Stoukides, M. (2000) · Journal of Catalysis · doi:10.1006/jcat.2000.2877 · Cited by 134
Electrochemical Synthesis of Ammonia: A Low Pressure, Low Temperature Approach
Renner, J., Greenlee, L. F., Ayres, K. E., & Herring, A. M. (2015) · The Electrochemical Society Interface · doi:10.1149/2.f04152if · Cited by 134
Nørskov, J. K., Chen, J. G., Miranda, R., Fitzsimmons, T., & Stack, R. (2016) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1283146 · Cited by 114
Xu, G., Liu, R., & Wang, J. (2009) · Science China Chemistry · doi:10.1007/s11426-009-0135-7 · Cited by 110
Kim, K., Yoo, C., Kim, J., Yoon, H. C., & Han, J. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0741614jes · Cited by 108
Self-citationBouwman, L., & van der Hoek, K. W. (1997) · Atmospheric Environment · doi:10.1016/s1352-2310(97)00288-4 · Cited by 105
Haber process for ammonia synthesis
Modak, J. M. (2011) · Resonance · doi:10.1007/s12045-011-0130-0 · Cited by 100
Haber-Bosch and Other Industrial Processes
Leigh, G. J. (2004) · Springer eBooks · doi:10.1007/978-1-4020-3611-8_2 · Cited by 69
Li, F., & Licht, S. L. (2014) · Inorganic Chemistry · doi:10.1021/ic5020048 · Cited by 65
Liu, R., & Xu, G. (2010) · Chinese Journal of Chemistry · doi:10.1002/cjoc.201090044 · Cited by 58
Cathode catalysis performance of SmBaCuMO5+δ (M=Fe, Co, Ni) in ammonia synthesis
Zhang, Z., Zhong, Z., & Liu, R. (2010) · Journal of Rare Earths · doi:10.1016/s1002-0721(09)60153-8 · Cited by 51
Xu, G., & Liu, R. (2009) · Chinese Journal of Chemistry · doi:10.1002/cjoc.200990111 · Cited by 32
Cited by
Catalysts for nitrogen reduction to ammonia
Foster, S. L., Bakovic, S. I. P., Duda, R. D., Maheshwari, S., Milton, R. D., Minteer, S. D., Janik, M. J., Renner, J. N., & Greenlee, L. F. (2018) · Nature Catalysis · doi:10.1038/s41929-018-0092-7 · Cited by 1,633
A rigorous electrochemical ammonia synthesis protocol with quantitative isotope measurements
Andersen, S. Z., Čolić, V., Yang, S., Schwalbe, J. A., Nielander, A. C., McEnaney, J. M., Enemark-Rasmussen, K., Baker, J. G., Singh, A. R., Rohr, B. A., et al. (2019) · Nature · doi:10.1038/s41586-019-1260-x · Cited by 1,554
Recent Advances and Challenges of Electrocatalytic N2Reduction to Ammonia
Qing, G., Ghazfar, R., Jackowski, S. T., Habibzadeh, F., Ashtiani, M. M., Chen, C.-P., Smith, M. R., & Hamann, T. W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00659 · Cited by 1,323
A Review of Electrocatalytic Reduction of Dinitrogen to Ammonia under Ambient Conditions
Cui, X., Tang, C., & Zhang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800369 · Cited by 1,314
How to explore ambient electrocatalytic nitrogen reduction reliably and insightfully
Tang, C., & Qiao, S.-Z. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00280d · Cited by 993
Metadata
- Authors
- Kong, J., Lim, A., Yoon, C., Jang, J. H., Ham, H. C., Han, J., Nam, S., Kim, D., Sung, Y.-E., Choi, J., & Park, H. S.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-10-26
- Volume
- 5
- Issue
- 11
- Pages
- 10986-10995
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2766606592
- Cited by
- 272
- References
- 26
- FWCI
- 11.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.