Optimization of Lignin Extraction from Pine Wood for Fast Pyrolysis by Using a γ-Valerolactone-Based Binary Solvent System
Open accessThe DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.
Abstract
Fast pyrolysis of lignin is a promising method to produce aromatic chemicals and fuels. Lignin structure and pyrolysis conditions determine the liquid yield and product selectivity. Extraction of pine wood using γ-valerolactone (GVL) mixed with water in the presence of diluted sulfuric acid obtains lignin (GVL–lignin) which shows different product yield and selectivity. The composition of the extraction medium influences the yield of GVL–lignin and affects its native structure. The GVL-to-water ratio affects the lignin yield without significantly modifying the structure of the extracted lignin, whereas the sulfuric acid concentration affects both the extraction yield and the extracted lignin structure. These structural changes influence the product distribution after fast pyrolysis, which generates phenols and alkoxy phenols as the main products in the liquid fraction. Lignin extracted with a mixture of 4/1 of GVL/H 2 O (w/w) and 0.075 M sulfuric acid solution produces the highest pyrolysis liquid yield. Pyrolysis of GVL–lignin at 750 °C generates the maximum liquid yield. The amount of phenols in fast pyrolysis products increases with increasing temperature and sulfuric acid concentration used in the GVL–lignin extraction. This indicates that the extraction conditions of GVL–lignin may be optimized to increase the selectivity in fast pyrolysis.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The volatile products distribution shows that G-type phenols are the major compounds due to the nature of Kraft lignin extracted from black liquor [230, 231].”
From A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency (2022) · cites this paper as [230]
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856 · cited 1×
“39,40 In 41-45 In this study, pine wood (softwood) was employed as the lignocellulosic biomass source for lignin extraction with GVL/H 2 O solvent in the presence of sulfuric acid.”
Methods for Pretreatment of Lignocellulosic Biomass for Efficient Hydrolysis and Biofuel Production
Kumar, P., Barrett, D. M., Delwiche, M. J., & Stroeve, P. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801542g · Cited by 3,772 · cited 1×
“…conventionally as a polymer of phenylpropane units (monolignols), namely p -coumaryl, coniferyl and sinapyl alcohols, also called units H, G and S. 9,10 Each unit in the lignin structure is connected by various ether and carbon-carbon linkages, such as β-O-4, 4-O-5, α-O-4, β-β, β-5, β-1 and 5-5.”
Catalytic Transformation of Lignin for the Production of Chemicals and Fuels
Li, C., Zhao, X., Wang, A., Huber, G. W., & Zhang, T. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00155 · Cited by 2,951 · cited 1×
“39,40 In 41-45 In this study, pine wood (softwood) was employed as the lignocellulosic biomass source for lignin extraction with GVL/H 2 O solvent in the presence of sulfuric acid.”
Pretreatment of Lignocellulosic Wastes to Improve Ethanol and Biogas Production: A Review
Taherzadeh, M. J., & Karimi, K. (2008) · International Journal of Molecular Sciences · doi:10.3390/ijms9091621 · Cited by 2,634
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
Conversion of biomass to selected chemical products
Gallezot, P. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15147a · Cited by 2,552
Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading
Schutyser, W., Renders, T., Van den Bosch, S., Koelewijn, S.-F., Beckham, G. T., & Sels, B. F. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00566k · Cited by 2,552
Bright Side of Lignin Depolymerization: Toward New Platform Chemicals
Sun, Z., Fridrich, B., de Santi, A., Elangovan, S., & Barta, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00588 · Cited by 2,191 · cited 1×
“15 16-18 Thus, the organosolv method generates lignin which is more amenable towards depolymerization.”
Paving the Way for Lignin Valorisation: Recent Advances in Bioengineering, Biorefining and Catalysis
Rinaldi, R., Jastrzebski, R., Clough, M. T., Ralph, J., Kennema, M., Bruijnincx, P. C. A., & Weckhuysen, B. M. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201510351 · Cited by 2,138 · cited 1×
“19 20-22 In addition, side reactions such as cleavage of aryl ether linkages, ethoxylation and condensation reactions can take place, resulting in undesired structure modifications.”
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058 · cited 1×
“35 36-38 In fast pyrolysis, lignin is thermally treated using very high heating rates and short vapor residence times, followed by a rapid cooling of the pyrolysis vapors to obtain bio-oil containing important amounts of aromatic compounds.”
Research works printed but not linked: 2
- 2018, Swiss National Forest Inventory
- Brasch D. J., 1965, Tappi, 48, 245
Cited by
Downstream processing of lignin derived feedstock into end products
Wong, S. S., Shu, R., Zhang, J., Liu, H., & Yan, N. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00134a · Cited by 528
Current advancement on the isolation, characterization and application of lignin
Liao, J. J., Latif, N. H. A., Trache, D., Brosse, N., & Hussin, M. H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.168 · Cited by 425
Lu, X., & Gu, X. (2022) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-022-02203-0 · Cited by 354
“The volatile products distribution shows that G-type phenols are the major compounds due to the nature of Kraft lignin extracted from black liquor [230, 231].”
BackgroundAntibacterial lignin-based nanoparticles and their use in composite materials
Morena, A. G., & Tzanov, T. (2022) · Nanoscale Advances · doi:10.1039/d2na00423b · Cited by 160
Wang, R., Wang, K., Zhou, M., Xu, J., & Jiang, J. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.124873 · Cited by 147
Hydrothermal liquefaction of lignin to aromatic chemicals: impact of lignin structure
Cao, Y., Zhang, C., Tsang, D. C. W., Fan, J., Clark, J. H., & Zhang, S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01617 · Cited by 128
Chemical and Biological Delignification of Biomass: A Review
Schieppati, D., Patience, N. A., Galli, F., Dal, P., Seck, I., Patience, G. S., Fuoco, D., Banquy, X., & Boffito, D. C. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c01231 · Cited by 72
Li, T., Ma, H., Wu, S., & Yin, Y. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112551 · Cited by 53
Jasiukaitytė‐Grojzdek, E., Huš, M., Grilc, M., & Likozar, B. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c06099 · Cited by 55
Li, J., Guan, D., Xia, S., Fan, Y., Zhao, K., Zhao, Z., & Zheng, A. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.119123 · Cited by 54
Improving fast pyrolysis of lignin using three additives with different modes of action
Ghysels, S., Dubuisson, B., Pala, M., Rohrbach, L., den Bulcke, J. V., Heeres, H. J., & Ronsse, F. (2020) · Green Chemistry · doi:10.1039/d0gc02417a · Cited by 48
Li, T., Yin, Y., Wu, S., & Du, X. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2021.126120 · Cited by 42
Technology Overview of Fast Pyrolysis of Lignin: Current State and Potential for Scale‐Up
Singh‐Morgan, A., Puente-Urbina, A. A., & van Bokhoven, J. A. (2022) · ChemSusChem · doi:10.1002/cssc.202200343 · Cited by 40
Self-citationMo, J., Zhao, C., Fang, C., Long, Y., Han, Y., Mei, Q., & Wu, W. (2025) · Waste Management · doi:10.1016/j.wasman.2025.114851 · Cited by 31
Liu, J., Shi, X., Ma, L., Zhang, D., Lai, C., Wang, C., Li, M., Ragauskas, A. J., Chu, F., & Xu, Y. (2023) · Green Chemistry · doi:10.1039/d3gc01500a · Cited by 24
Chen, H., Xu, G., Xiao, C., Bi, Y., & Hu, J. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b01486 · Cited by 24
Selectivity Control of C-O Bond Cleavage for Catalytic Biomass Valorization
Jian, Y., Meng, Y., & Li, H. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2021.827680 · Cited by 22
“The three mainmonomers in lignin have been identified as p-coumaric acid, coniferous alcohol, and mustard alcohol (Jampa et al., 2019).”
BackgroundA Comparative Study of Lignin Recovery Conditions Using GVL-Organosolv and Lignin Characterization
Tanış, M. H., Vercoutere, E., Galbe, M., Al‐Rudainy, B., & Wallberg, O. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c03088 · Cited by 23
One-Pot Photocatalytic Cleavage of Lignin β–O–4 Models by Dehydrogenation–Hydrogenolysis
Song, Z., Hu, Y., Li, S., Liu, J., Zhang, X., Ma, L., Chen, L., & Zhang, Q. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c01239 · Cited by 21
Challenges and Opportunities for Gamma-Valerolactone in Biomass Pretreatment
Haykır, N. I., & Viell, J. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.4c01277 · Cited by 22
Zhao, D., He, J., Zhao, Y., Ma, K., Xu, Y., Xia, Q., Xiong, X., Tang, X., Zhao, Q., & Wang, R. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00737 · Cited by 13
Suppression Effect of Gamma-Valerolactone on the Mild Alkaline Pretreatment of Hybrid Pennisetum
Fan, Y., Li, L., Yang, G., Sun, Y., He, L., Wu, P., Lam, J. C., & Song, B. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c04924 · Cited by 12
Schweiger, M., Lang, T., Müller, E. C., Jeřábek, V., Heyda, J., Klajmon, M., Touraud, D., Bendová, M., Řehák, K., & Kunz, W. (2025) · RSC Sustainability · doi:10.1039/d5su00600g · Cited by 11
Pathway to fully-renewable biobased polyesters derived from HMF and phenols
Tavana, J., Faysal, A., Vithanage, A. E., Gramlich, W. M., & Schwartz, T. J. (2022) · Polymer Chemistry · doi:10.1039/d1py01441b · Cited by 10
Fractionating softwood lignocellulose using APW system for enhanced enzymatic hydrolysis
Xu, Y., Tan, X., Zhang, Q., Miao, C., Leksawasdi, N., Techapun, C., & Zhuang, X. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.118320 · Cited by 8
A review on lignin extraction processes at different production scales
Watkins, K., & Fatehi, P. (2026) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.122526 · Cited by 12
Duereh, A., Satô, Y., Smith, R. L., & Inomata, H. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b01179 · Cited by 8
Xu, M. L., Zhou, Z., Zhu, X., Duan, C., Shen, Q., Huang, Y. Y., Xia, A., Zhu, X., Yao, H., & Liao, Q. (2024) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2024.105299 · Cited by 7
Roy, S., Godbole, B., Shiju, N. R., & Biswas, P. (2025) · Materials Today Chemistry · doi:10.1016/j.mtchem.2025.102826 · Cited by 15
Schweiger, M., Lang, T., Touraud, D., Müller, E. C., & Kunz, W. (2025) · RSC Sustainability · doi:10.1039/d5su00324e · Cited by 7
Topology‐Dependent Coke Formation in the Catalytic Pyrolysis of Phenol Over HFAU and HZSM‐5 Zeolites
Fischer, J. W. A., Puente-Urbina, A. A., Pan, Z., Agrachev, M., Hemberger, P., Jeschke, G., & van Bokhoven, J. A. (2026) · Angewandte Chemie · doi:10.1002/ange.202523882 · Cited by 5
Self-citationda Silva, I. G. M., Lucas, E. F., & Advíncula, R. C. (2020) · Journal of Dispersion Science and Technology · doi:10.1080/01932691.2020.1845195 · Cited by 3
Bansode, A., Guertal, E. A., Cuesta, N. M., Hinkle, J., Farag, R., & Auad, M. L. (2025) · ACS Agricultural Science & Technology · doi:10.1021/acsagscitech.5c00682 · Cited by 2
Feng, T., Ding, X., Li, T., Zhang, C., & Wu, J. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.122072 · Cited by 2
Preparation of N Modified Ni2P-Nx/SiO2 Catalysts and Hydrodeoxygenation Performance of m-Cresol
Wang, S., & Song, H. L. (2024) · 化学学报 · doi:10.6023/a24070217 · Cited by 1
Song, W., Li, M., Han, X., Li, X., Wang, Y., Su, Y., & Tian, F. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.120279 · Cited by 1
Research Progress on Separation and Extraction Technologies of Lignin
Wang, D., Cui, M., Liu, X., Liu, M., Han, X., Xiong, X., Chen, S., Ma, S., Sun, Q., Jiao, L., et al. (2026) · Materials · doi:10.3390/ma19101998 · Cited by 1
Tautorat, P., Tremolada, B., Martín, A. J., dos Santos, L. F., Guillén‐Gosálbez, G., Pérez‐Ramírez, J., & Steffen, B. (2025) · Green Chemistry · doi:10.1039/d5gc02863a · Cited by 2
Fu, B., Cheng, C., Fan, J., & Yuan, J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15584-0.00009-4 · Cited by 2
Morena, A. G. (2023) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-406732 · Cited by 1
γ-Valerolactone Lignin: Extraction
Kabakcı, S. B., & Al, K. (2025) · Springer eBooks · doi:10.1007/978-981-97-2664-6_7-1
γ-Valerolactone Lignin: Extraction
Kabakcı, S. B., & Al, K. (2025) · Springer eBooks · doi:10.1007/978-981-96-7633-0_7
Dixit, P., Benavente, V., Tomas, G., Hedenström, M., Gorzsás, A., Sundman, O., Soto, L. R., Jönsson, L. J., & Martı́n, C. (2025) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2025.108846
“Most published studies on the application of GVL to softwood materials focus on the extraction of a single biomass component, typically lignin, from sources such as spruce [7], steam-pretreated spruce saccharification residue [8], or pine wood prior to pyrolysis [9].”
Wang, T., Wang, D., Chen, Z., Wang, C., Wang, J., Xie, C., Zhang, C., Hong, S., & Shen, X. (2026) · Chemical Synthesis · doi:10.20517/cs.2025.04
Investigation of biomass valorization processes through catalysis and functional materials
Thomas, N. (2024) · theses.fr (ABES) · doi:10.70675/f5063134z6dcez4a38z9b3ez8789badbb471
Metadata
- Authors
- Jampa, S., Puente-Urbina, A., Ma, Z., Wongkasemjit, S., Luterbacher, J. S., & van Bokhoven, J. A.
- Affiliations
- Chulalongkorn University (TH)
- ETH Zurich (CH)
- École Polytechnique Fédérale de Lausanne (CH)
- Department of Chemistry and Applied Biosciences, Institute for Chemical and Bioengineering, ETH Zurich, HCI E 127, Vladimir-Prelog-Weg 1, 8093 Zurich, Switzerland
- ORCID
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-01-20
- Volume
- 7
- Issue
- 4
- Pages
- 4058-4068
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2910786090
- Cited by
- 45
- References
- 79
- Citations by year
- 2026: 5 · 2025: 12 · 2024: 7 · 2023: 4 · 2022: 5 · 2021: 3 · 2020: 7 · 2019: 2
- FWCI
- 1.50
- Type
- journal article
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Licence
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion)
- DORA PSI (Paul Scherrer Institute) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Funders
- Ministry of Science and Technology of Thailand
- Ministerio de Ciencia Tecnología y Telecomunicaciones
- Thailand Research Fund
- Instituto Tecnológico de Costa Rica
- Topics
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Chemical Engineering › Catalysis › Catalysis for Biomass Conversion
- Keywords
- lignin extraction, pine forest, fast pyrolysis, γ-valerolactone, mixed solvents, sulfuric acid, lignin structure, phenols, pyrolysis temperature, extraction optimization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.