The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Imine-Linked Polymer-Derived Nitrogen-Doped Microporous Carbons with Excellent CO2 Capture Properties
Abstract
A series of nitrogen-doped microporous carbons (NCs) was successfully prepared by direct pyrolysis of high-surface-area microporous imine-linked polymer (ILP, 744 m(2)/g) which was formed using commercial starting materials based on the Schiff base condensation under catalyst-free conditions. These NCs have moderate specific surface areas of up to 366 m(2)/g, pore volumes of 0.43 cm(3)/g, narrow micropore size distributions, and a high density of nitrogen functional groups (5.58-8.74%). The resulting NCs are highly suitable for CO2 capture adsorbents because of their microporous textural properties and large amount of Lewis basic sites. At 1 bar, NC-800 prepared by the pyrolysis of ILP at 800 °C showed the highest CO2 uptakes of 1.95 and 2.65 mmol/g at 25 and 0 °C, respectively. The calculated adsorption capacity for CO2 per m(2) (μmol of CO2/m(2)) of NC-800 is 7.41 μmol of CO2/m(2) at 1 bar and 25 °C, the highest ever reported for porous carbon adsorbents. The isosteric heats of CO2 adsorption (Qst) for these NCs are as high as 49 kJ/mol at low CO2 surface coverage, and still ~25 kJ/mol even at high CO2 uptake (2.0 mmol/g), respectively. Furthermore, these NCs also exhibit high stability, excellent adsorption selectivity for CO2 over N2, and easy regeneration and reuse without any evident loss of CO2 adsorption capacity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, H., Maiyalagan, T., & Wang, X. (2012) · ACS Catalysis · doi:10.1021/cs200652y · Cited by 3,618
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Fungi-based porous carbons for CO2 adsorption and separation
Wang, J., Heerwig, A., Lohe, M. R., Oschatz, M., Borchardt, L., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32139d · Cited by 220
Self-citationSustainable and hierarchical porous Enteromorpha prolifera based carbon for CO2 capture
Zhang, Z., Wang, K., Atkinson, J. D., Yan, X., Li, X., Rood, M. J., & Yan, Z. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.05.094 · Cited by 120
Cited by
A review on solid adsorbents for carbon dioxide capture
Lee, S.-Y., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.09.001 · Cited by 707
Porous Polymers as Multifunctional Material Platforms toward Task‐Specific Applications
Wu, J., Xu, F., Li, S., Ma, P., Zhang, X., Liu, Q., Fu, R., & Wu, D. (2019) · Advanced Materials · doi:10.1002/adma.201802922 · Cited by 555
Self-citationLi, X., Wen, J., Low, J., Fang, Y., & Yu, J. (2014) · Science China Materials · doi:10.1007/s40843-014-0003-1 · Cited by 517
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
An investigation of CO2 adsorption kinetics on porous magnesium oxide
Song, G., Zhu, X., Chen, R., Liao, Q., Ding, Y.-D., & Chen, L. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.07.055 · Cited by 278
Metadata
- Authors
- Wang, J., Senkovska, I., Oschatz, M., Lohe, M. R., Borchardt, L., Heerwig, A., Liu, Q., & Kaskel, S.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-04-10
- Volume
- 5
- Issue
- 8
- Pages
- 3160-3167
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2320536667
- Cited by
- 163
- References
- 6
- FWCI
- 31.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.