CoChat

Stereocomplexation of Polylactide Enhanced by Poly(methyl methacrylate): Improved Processability and Thermomechanical Properties of Stereocomplexable Polylactide-Based Materials

Samuel, Cédric, Cayuela, Julien, Barakat, Ibrahim, Müller, Alejandro J., Raquez, Jean-Marie, Dubois, Philippe · 2013 · ACS Applied Materials & Interfaces
Cited by 108

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Abstract

Stereocomplexable polylactides (PLAs) with improved processability and thermomechanical properties have been prepared by one-step melt blending of high-molecular-weight poly(l-lactide) (PLLA), poly(d-lactide) (PDLA), and poly(methyl methacrylate) (PMMA). Crystallization of PLA stereocomplexes occurred during cooling from the melt, and, surprisingly, PMMA enhanced the amount of stereocomplex formation, especially with the addition of 30-40 % PMMA. The prepared ternary blends were found to be miscible, and such miscibility is likely a key factor to the role of PMMA in enhancing stereocomplexation. In addition, the incorporation of PMMA during compounding substantially raised the melt viscosity at 230 °C. Therefore, to some extent, the use of PMMA could also overcome processing difficulties associated with low viscosities of stereocomplexable PLA-based materials. Semicrystalline miscible blends with good transparency were recovered after injection molding, and in a first approach, the thermomechanical properties could be tuned by the PMMA content. Superior storage modulus and thermal resistance to deformation were thereby found for semicrystalline ternary blends compared to binary PLLA/PMMA blends. The amount of PLA stereocomplexes could be significantly increased with an additional thermal treatment, without compromising transparency. This could result in a remarkable thermal resistance to deformation at much higher temperatures than with conventional PLA. Consequently, stereocomplex crystallization into miscible PLLA/PDLA/PMMA blends represents a relevant approach to developing transparent, heat-resistant, and partly biobased polymers using conventional injection-molding processes.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/am403443m

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 7 references

Cited by

Metadata

Authors
Samuel, C., Cayuela, J., Barakat, I., Müller, A. J., Raquez, J.-M., & Dubois, P.
Venue
ACS Applied Materials & Interfaces
Published
2013-11-05
Volume
5
Issue
22
Pages
11797-11807
ISSN
  • 1944-8244 (ISSN-L)
  • 1944-8252
OpenAlex
W2029904876
Cited by
108
References
7
FWCI
6.71
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.