The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Polydopamine As an Efficient and Robust Platform to Functionalize Carbon Fiber for High-Performance Polymer Composites
Abstract
Carbon fibers (CFs), which exhibit excellent physical performances and low density, suffer from their low surface activity in some application. Herein, based on dopamine chemistry, we proposed an efficient method to functionalize them: through a simple dip-coating procedure, the CFs were inverted from amphiphobic to hydrophilic with deposition of polydopamine film. Furthermore, using polydopamine as a bridge, the hydrophilic functionalized CFs were transformed to be oleophilic after following octadecylamine grafting. To illustrate applications of this functionalization strategy, we added 15 wt % functionalized CFs into polar epoxy and nonpolar poly(ethylene-co-octene), and as a consequence, their tensile strength respectively increase by 70 and 60%, which show greater reinforcing effect than the unmodified ones (35 and 35%). The results of dynamic mechanical analysis and scanning electron microscope observations indicate that this polydopamine-based functionalization route brought about satisfactory improvements in interfacial adhesion between fillers and matrix. Considering that this simple approach is facile and robust enough to allow further specific functionalization to adjust surface properties, these findings may lead to the development of new efficient strategies for surface functionalization of CFs that are of great interest to the industrial field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Facile Conjugation of Biomolecules onto Surfaces via Mussel Adhesive Protein Inspired Coatings
Lee, H., Rho, J., & Messersmith, P. B. (2009) · Advanced Materials · doi:10.1002/adma.200801222 · Cited by 1,495
Dopamine-Induced Reduction and Functionalization of Graphene Oxide Nanosheets
Xu, L. Q., Yang, W. J., Neoh, K.-G., Kang, E.-T., & Fu, G. D. (2010) · Macromolecules · doi:10.1021/ma101526k · Cited by 785
Interfacial Microstructure and Properties of Carbon Fiber Composites Modified with Graphene Oxide
Zhang, X., Fan, X., Yan, C., Li, H., Zhu, Y., Li, X., & Yu, L. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201757v · Cited by 673
Polyphosphoprotein from the Adhesive Pads of Mytilus edulis
Waite, J. H., & Qin, X. (2001) · Biochemistry · doi:10.1021/bi002718x · Cited by 610
Chemical and Structural Diversity in Eumelanins: Unexplored Bio‐Optoelectronic Materials
d'Ischia, M., Napolitano, A., Pezzella, A., Meredith, P., & Sarna, T. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200803786 · Cited by 591
One‐Step Modification of Superhydrophobic Surfaces by a Mussel‐Inspired Polymer Coating
Kang, S. M., You, I., Cho, W. K., Shon, H. K., Lee, T. G., Choi, I. S., Karp, J. M., & Lee, H. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201004693 · Cited by 442
Waite, J. H. (2008) · Nature Materials · doi:10.1038/nmat2087 · Cited by 407
Tian, Y., Cao, Y., Wang, Y., Yang, W., & Feng, J. (2013) · Advanced Materials · doi:10.1002/adma.201300118 · Cited by 390
Self-citationMussel-Inspired Chemistry and Michael Addition Reaction for Efficient Oil/Water Separation
Cao, Y., Zhang, X., Tao, L., Li, K., Xue, Z., Feng, L., & Wei, Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4008598 · Cited by 317
Self-citationA review of methods for improving the interfacial adhesion between carbon fiber and polymer matrix
Tang, L., & Kardos, J. L. (1997) · Polymer Composites · doi:10.1002/pc.10265 · Cited by 309
Kinetic and Structural Analysis of the Early Oxidation Products of Dopamine
Bisaglia, M., Mammi, S., & Bubacco, L. (2007) · Journal of Biological Chemistry · doi:10.1074/jbc.m610893200 · Cited by 303
Cui, J., Wang, Y., Postma, A., Hao, J., Hosta‐Rigau, L., & Caruso, F. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000209 · Cited by 290
Gammon, W. J., Kraft, O., Reilly, A., & Holloway, B. C. (2003) · Carbon · doi:10.1016/s0008-6223(03)00170-2 · Cited by 287
Yang, L., Phua, S. L., Teo, J. K. H., Toh, C. L., Lau, S. K., Ma, J., & Lu, X. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200532j · Cited by 271
Biomimetic Anchors for Antifouling and Antibacterial Polymer Brushes on Stainless Steel
Yang, W. J., Cai, T., Neoh, K.-G., Kang, E.-T., Dickinson, G. H., Teo, S. L.-M., & Rittschof, D. (2011) · Langmuir · doi:10.1021/la200620s · Cited by 202
Rim, N. G., Kim, S. J., Shin, Y. M., Jun, I., Lim, D. W., Park, J. H., & Shin, H. (2012) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2011.10.057 · Cited by 202
Kaminska, I., Das, M. R., Coffinier, Y., Niedziolka-Jonsson, J., Sobczak, J., Woisel, P., Lyskawa, J., Opallo, M., Boukherroub, R., & Szunerits, S. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201664n · Cited by 200
Preparation and characterization of dopamine-decorated hydrophilic carbon black
Zhu, L., Lu, Y., Wang, Y., Zhang, L., & Wang, W. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.02.016 · Cited by 197
Surface properties of electrochemically oxidized carbon fibers
Pittman, C. U. J., Jiang, W., Yue, Z., et al. (1999) · Carbon · doi:10.1016/s0008-6223(99)00048-2 · Cited by 180
Phua, S. L., Yang, L., Toh, C. L., Huang, S., Tsakadze, Z., Lau, S. K., Mai, Y.-W., & Lu, X. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300947b · Cited by 164
Ball, V., Frari, D. D., Michel, M., Buehler, M. J., Toniazzo, V., Singh, M. K., Gracio, J. J. D. A., & Ruch, D. (2011) · BioNanoScience · doi:10.1007/s12668-011-0032-3 · Cited by 161
Bernsmann, F., Frisch, B., Ringwald, C., & Ball, V. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.12.052 · Cited by 140
Mechanisms of surfactant adsorption on non-polar, air-oxidized and ozone-treated carbon surfaces
Chen, X., Farber, M., Gao, Y., Külaots, I., Suuberg, E. M., & Hurt, R. H. (2003) · Carbon · doi:10.1016/s0008-6223(03)00053-8 · Cited by 130
Down, W. B., & Baker, R. T. K. (1995) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1995.0625 · Cited by 117
Silver‐Polydopamine Hybrid Coatings of Electrospun Poly(vinyl alcohol) Nanofibers
Son, H. Y., Ryu, J. H., Lee, H., & Nam, Y. S. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200231 · Cited by 115
Huang, S., Yang, L., Liu, M., Phua, S. L., Yee, W. A., Liu, W., Zhou, R., & Lu, X. (2013) · Langmuir · doi:10.1021/la303855t · Cited by 101
Phua, S. L., Yang, L., Toh, C. L., Guoqiang, D., Lau, S. K., Dasari, A., & Lu, X. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am3024405 · Cited by 91
Effect of fiber surface on flexural strength in carbon fabric reinforced epoxy composites
Brocks, T., Cioffi, M. O. H., & Voorwald, H. J. C. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.03.018 · Cited by 83
Ou, J., Wang, J., Liu, S., Zhou, J., & Yang, S. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp9073416 · Cited by 78
Adhyaru, B. B., Akhmedov, N. G., KATRITZKY, A. R., & Bowers, C. R. (2003) · Magnetic Resonance in Chemistry · doi:10.1002/mrc.1193 · Cited by 76
Son, H. Y., Ryu, J. H., Lee, H., & Nam, Y. S. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401550p · Cited by 73
Bernsmann, F., Richert, L., Senger, B., Lavall�e, P., Voegel, J., Schaaf, P., & Ball, V. (2008) · Soft Matter · doi:10.1039/b806649c · Cited by 65
Lin, M., Huang, H., Liu, Y., Liang, C.-J., Fei, S., Chen, X., & Ni, C. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/6/065501 · Cited by 60
Niu, H., Wang, S., Zeng, T., Wang, Y., Zhang, X., Meng, Z., & Cai, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30952a · Cited by 35
Arzillo, M., Pezzella, A., Crescenzi, O., Napolitano, A., Land, E. J., Barone, V., & d’Ischia, M. (2010) · Organic Letters · doi:10.1021/ol101188c · Cited by 27
Characterization of Melanin-TiO2Complexes Using FT-IR and13C Solid-state NMR Spectroscopy
Park, T. J. (2008) · Bulletin of the Korean Chemical Society · doi:10.5012/bkcs.2008.29.12.2459 · Cited by 23
Cited by
Recent advances of interphases in carbon fiber-reinforced polymer composites: A review
Zheng, H., Zhang, W., Li, B., Zhu, J., Wang, C., Song, G., Wu, G., Yang, X., Huang, Y., & Ma, L. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109639 · Cited by 797
Chen, Y., Zhang, L., Yang, Y., Pang, B., Xu, W., Duan, G., Jiang, S., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202005569 · Cited by 721
Bioinspired Modification of h-BN for High Thermal Conductive Composite Films with Aligned Structure
Shen, H., Guo, J., Wang, H., Zhao, N., & Xu, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507416y · Cited by 491
Recent advances in basalt-fiber-reinforced composites: Tailoring the fiber-matrix interface
Khandelwal, S., & Rhee, K. Y. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108011 · Cited by 375
Interfacial characterization, control and modification of carbon fiber reinforced polymer composites
Liu, L., Jia, C., He, J., Zhao, F., Fan, D., Xing, L., Wang, M., Wang, F., Jiang, Z., & Huang, Y. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.08.002 · Cited by 352
Metadata
- Authors
- Chen, S., Cao, Y., & Feng, J.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-11-21
- Volume
- 6
- Issue
- 1
- Pages
- 349-356
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2312746382
- Cited by
- 297
- References
- 37
- FWCI
- 10.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.