The DOI matches its Crossref record.
Preparation and Characterization of Magnetic Porous Carbon Microspheres for Removal of Methylene Blue by a Heterogeneous Fenton Reaction
Abstract
High-specific-surface-area magnetic porous carbon microspheres (MPCMSs) were fabricated by annealing Fe(2+)-treated porous polystyrene (PS) microspheres, which were prepared using a two-step seed emulsion polymerization process. The resulting porous microspheres were then sulfonated, and Fe(2+) was loaded by ion exchange, followed by annealing at 250 °C for 1 h under an ambient atmosphere to obtain the PS-250 composite. The MPCMS-500 and MPCMS-800 composites were obtained by annealing PS-250 at 500 and 800 °C for 1 h, respectively. The iron oxide in MPCMS-500 mainly existed in the form of Fe3O4, which was concluded by characterization. The MPCMS-500 carbon microspheres were used as catalysts in heterogeneous Fenton reactions to remove methylene blue (MB) from wastewater with the help of H2O2 and NH2OH. The results indicated that this catalytic system has a good performance in terms of removal of MB; it could remove 40 mg L(-1) of MB within 40 min. After the reaction, the catalyst was conveniently separated from the media within several seconds using an external magnetic field, and the catalytic activity was still viable even after 10 removal cycles. The good catalytic performance of the composites could be attributed to synergy between the functions of the porous carbon support and the Fe3O4 nanoparticles embedded in the carrier. This work indicates that porous carbon spheres provide good support for the development of a highly efficient heterogeneous Fenton catalyst useful for environmental pollution cleanup.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review on Methylene Blue: Its Properties, Uses, Toxicity and Photodegradation
Khan, I., Saeed, K., Zekker, I., Zhang, B., Hendi, A. H., Ahmad, A., Ahmad, S., Zada, N., Ahmad, H., Shah, L. A., et al. (2022) · Water · doi:10.3390/w14020242 · Cited by 1,703
A review on Fenton process for organic wastewater treatment based on optimization perspective
Zhang, M.-H., Dong, H., Zhao, L., Wang, D.-X., & Meng, D. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.03.180 · Cited by 1,145
Munoz, M., de Pedro, Z. M., Casas, J. A., & Rodriguez, J. J. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.04.003 · Cited by 754
Zhou, H., Zhang, H., He, Y., Huang, B., Zhou, C., Yao, G., & Lai, B. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2021.119900 · Cited by 338
Self-citationYao, Y., Chen, H., Qin, J., Wu, G., Lian, C., Zhang, J., & Wang, S. (2016) · Water Research · doi:10.1016/j.watres.2016.05.065 · Cited by 332
Cazetta, A. L., Pezoti, O., Bedin, K. C., Silva, T. L., Paesano Junior, A., Asefa, T., & Almeida, V. C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01141 · Cited by 312
Fe-based Fenton-like catalysts for water treatment: Preparation, characterization and modification
Wang, J., & Tang, J. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130177 · Cited by 302
Yang, X., Chen, W., Huang, J., Zhou, Y., Zhu, Y., & Li, C. (2015) · Scientific Reports · doi:10.1038/srep10632 · Cited by 289
Excellent photo-Fenton catalysts of Fe–Co Prussian blue analogues and their reaction mechanism study
Li, X., Liu, J., Rykov, A. I., Han, H., Jin, C., Liu, X., & Wang, J. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.05.033 · Cited by 288
Self-citationXanthan gum-derived materials for applications in environment and eco-friendly materials: A review
Abu Elella, M. H., Goda, E. S., Gab-Allah, M. A., Hong, S. E., Pandit, B., Lee, S., Gamal, H., Rehman, A. U., & Yoon, K. R. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104702 · Cited by 283
Qian, X., Ren, M., Zhu, Y., Yue, D., Han, Y., Jia, J., & Zhao, Y. (2017) · Environmental Science & Technology · doi:10.1021/acs.est.6b06429 · Cited by 272
Tang, J., & Wang, J. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.06.169 · Cited by 269
Manippady, S. R., Singh, A., Basavaraja, B. M., Samal, A. K., Srivastava, S., & Saxena, M. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.9b02348 · Cited by 98
Hydrothermal Treatment of Tannin: A Route to Porous Metal Oxides and Metal/Carbon Hybrid Materials
Braghiroli, F., Fierro, V., Szczurek, A., Gadonneix, P., Ghanbaja, J., Parmentier, J., Medjahdi, G., & Celzard, A. (2017) · Inorganics · doi:10.3390/inorganics5010007 · Cited by 25
Metadata
- Authors
- Zhou, L., Shao, Y., Liu, J., Ye, Z., Zhang, H., Ma, J., Jia, Y., Gao, W., & Li, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-05-06
- Volume
- 6
- Issue
- 10
- Pages
- 7275-7285
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2326496751
- Cited by
- 245
- References
- 0
- FWCI
- 21.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.