The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Open accessAbstract
Multiphase blends of poly(lactic acid) (PLA), ethylene-methyl acrylate-glycidyl methacrylate (EMA-GMA) terpolymer, and a series of renewable poly(ether-b-amide) elastomeric copolymer (PEBA) were fabricated through reactive melt blending in an effort to improve the toughness of the PLA. Supertoughened PLA blend showing impact strength of ∼500 J/m with partial break impact behavior was achieved at an optimized blending ratio of 70 wt % PLA, 20 wt % EMA-GMA, and 10 wt % PEBA. Miscibility and thermal behavior of the binary blends PLA/PEBA and PLA/EMA-GMA, and the multiphase blends were also investigated through differential scanning calorimetric (DSC) and dynamic mechanical analysis (DMA). Phase morphology and fracture surface morphology of the blends were studied through scanning electron microscopy (SEM) and atomic force microscopy (AFM) to understand the strong corelation between the morphology and its significant effect on imparting tremendous improvement in toughness. A unique "multiple stacked structure" with partial encapsulation of EMA-GMA and PEBA minor phases was observed for the PLA/EMA-GMA/PEBA (70/20/10) revealing the importance of particular blend composition in enhancing the toughness. Toughening mechanism behind the supertoughened PLA blends have been established by studying the impact fractured surface morphology at different zones of fracture. Synergistic effect of good interfacial adhesion and interfacial cavitations followed by massive shear yielding of the matrix was believed to contribute to the enormous toughening effect observed in these multiphase blends.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Polymers from Renewable Resources: A Perspective for a Special Issue of Polymer Reviews
Williams, C., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834133 · Cited by 977
Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends
Jiang, L., Wolcott, M. P., & Zhang, J. (2006) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 954
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Effect of interfacial forces on polymer blend morphologies
HOBBS, S., DEKKERS, M., & WATKINS, V (1988) · Polymer · doi:10.1016/0032-3861(88)90269-8 · Cited by 455
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Research works printed but not linked: 6
- Li L., 2012, Polymer, 53, 3043, 10.1016/j.polymer.2012.05.003 · doi:10.1016/j.polymer.2012.05.003
- Yin B., 2013, Polymer, 54, 1938, 10.1016/j.polymer.2013.02.001 · doi:10.1016/j.polymer.2013.02.001
- Sheth J. P., 2003, Polymer, 44, 743, 10.1016/S0032-3861(02)00798-X · doi:10.1016/s0032-3861(02)00798-x
- Eustache, R. P.InHandbook of Condensation Thermoplastic Elastomer;Fakirov, S., Eds;Wiley-VCH: Verlag GmbH & Co. KGaA:Weinheim, Germany, 2005; Chapter 10, pp263–280.
- Fleischer C. A., 1994, Macromolecules, 27, 379, 10.1021/ma00080a010 · doi:10.1021/ma00080a010
- Kim G., 1998, Polymer, 39, 5699, 10.1016/S0032-3861(98)00169-4 · doi:10.1016/s0032-3861(98)00169-4
Cited by
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Self-citationPoly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Wang, X., Peng, S., Chen, H., Yu, X., & Zhao, X. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107028 · Cited by 393
PLA based biocomposites for sustainable products: A review
Trivedi, A. K., Gupta, M. K., & Singh, H. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.02.002 · Cited by 337
Tripathi, N., Misra, M., & Mohanty, A. K. (2021) · ACS Engineering Au · doi:10.1021/acsengineeringau.1c00011 · Cited by 304
Self-citationZolali, A. M., & Favis, B. D. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00464 · Cited by 100
Super Toughened Poly(lactic acid)-Based Ternary Blends via Enhancing Interfacial Compatibility
Wu, F., Misra, M., & Mohanty, A. K. (2019) · ACS Omega · doi:10.1021/acsomega.8b02587 · Cited by 79
Self-citationChen, H., Yu, X., Zhou, W., Peng, S., & Zhao, X. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.07.023 · Cited by 61
Yang, D.-D., Liu, W., Zhu, H.-M., Wu, G., Chen, S.-C., Wang, X.-L., & Wang, Y.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06343 · Cited by 60
Deokar, M. D., Garnaik, B., & Sivaram, S. (2022) · ACS Omega · doi:10.1021/acsomega.1c04486 · Cited by 21
Toughening modification of PLLA by combination of copolymerization and in situ reactive blending
Zhang, B., Bian, X., Zhou, D., Feng, L., Li, G., & Chen, X. (2016) · RSC Advances · doi:10.1039/c6ra23267a · Cited by 15
Metadata
- Authors
- Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-07-16
- Volume
- 6
- Issue
- 15
- Pages
- 12436-12448
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2319293843
- Cited by
- 267
- References
- 49
- FWCI
- 13.11
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.