Characterization of Polylactide-b-polyisoprene-b-polylactide Thermoplastic Elastomers
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Model polylactide-b-polyisoprene-b-polylactide (PLA-PI-PLA) triblock copolymers were prepared by an efficient protocol starting with alpha,omega-dihydroxy polyisoprene (HO-PI-OH). Using a moderately electrophilic Al(O-i-Pr)(3) catalyst and carefully controlling the ratio of Al to HO-PI-OH avoided gel formation and resulted in acceptable lactide polymerization rates. The triblock copolymers were free of homopolymer or diblock contaminants as determined by chromatographic and spectroscopic analyses. Three representative PLA-PI-PLA materials were prepared with spherical, cylindrical, and lamellar morphologies as confirmed by small-angle X-ray scattering and transmission electron microscopy. We employed dynamic mechanical analysis and tensile testing to assess the viscoelastic and mechanical behavior. The morphology largely determined the tensile properties of these materials, with the Young's modulus and ultimate tensile strength following predicted trends. Excellent elongations were achieved especially for the PLA-PI-PLA sample with the cylindrical morphology, and the PLA-PI-PLA sample with the spherical morphology showed the best elastomeric recovery. Microphase alignment and pull rate significantly influenced the resultant tensile properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fetters, L. J., Lohse, D. J., Milner, S. T., & Graessley, W. W. (1999) · Macromolecules · doi:10.1021/ma990620o · Cited by 487
Yu, J. M., Dubois, P., & Jérôme, R. (1996) · Macromolecules · doi:10.1021/ma960710i · Cited by 58
Cited by
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Aliphatic Polyester Block Polymers: Renewable, Degradable, and Sustainable
Hillmyer, M. A., & Tolman, W. B. (2014) · Accounts of Chemical Research · doi:10.1021/ar500121d · Cited by 635
Self-citationWang, W., Lu, W., Goodwin, A., Wang, H., Yin, P., Kang, N.-G., Hong, K., & Mays, J. W. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.04.002 · Cited by 326
Sustainable thermoplastic elastomers from terpene-derived monomers
Bolton, J. M., Hillmyer, M. A., & Hoye, T. R. (2014) · ACS Macro Letters · doi:10.1021/mz500339h · Cited by 186
Self-citationRenewable-Resource Thermoplastic Elastomers Based on Polylactide and Polymenthide
Wanamaker, C. L., O'Leary, L. E., Lynd, N. A., Hillmyer, M. A., & Tolman, W. B. (2007) · Biomacromolecules · doi:10.1021/bm700699g · Cited by 183
Self-citation
Metadata
- Authors
- Frick, E. M., Zalusky, A. S., & Hillmyer, M. A.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-02-11
- Volume
- 4
- Issue
- 2
- Pages
- 216-223
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2170401727
- Cited by
- 120
- References
- 2
- FWCI
- 2.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.