The DOI matches its Crossref record; 26 of the 27 references it cites were found in a registry or an index.
Effect of Reaction Conditions on the Properties and Behavior of Wood Cellulose Nanocrystal Suspensions
Abstract
Sulfuric acid hydrolysis of native cellulose fibers produces stable suspensions of cellulose nanocrystals. Above a critical concentration, the suspensions spontaneously form an anisotropic chiral nematic liquid crystal phase. We have examined the effect of reaction time and acid-to-pulp ratio on nanocrystal and suspension properties for hydrolyzed black spruce acid sulfite pulp. Longer hydrolysis times produced shorter, less polydisperse black spruce cellulose nanocrystals and slightly increased the critical concentration for anisotropic phase formation. Increased acid-to-pulp ratio reduced the dimensions of the nanocrystals thus produced; the critical concentration was increased and the biphasic range became narrower. A suspension made from a bleached kraft eucalyptus pulp gave very similar properties to the softwood nanocrystal suspension when prepared under similar hydrolysis conditions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They explained that the reaction time is one of the most important parameters to be considered in the acid hydrolysis of wood pulp.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [63]
In the citing paper
“Above a critical concentration, the rod-like shape of the charged cellulose nanocrystals leads to the formation of an anisotropic liquid crystalline phase [63,64].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [63]
In the citing paper
“Moreover, they reported that too long reaction times completely digest the cellulose to yield its component sugar molecules. On the contrary, lower reaction times will only yield large undispersable fibers and aggregates.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [63]
In the citing paper
“On the contrary, sulfuric acid-prepared nanocrystals present a negatively charged surface [13], due to the esterification of surface hydroxyl groups to give charged sulfate groups [63].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [63]
In the citing paper
“However, chiral nematic pitch decreases when increasing the cellulose concentration and decreasing the nanocrystals length.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [63]
2 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
THE EFFECTS OF SHAPE ON THE INTERACTION OF COLLOIDAL PARTICLES
Onsager, L. (1949) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.1949.tb27296.x · Cited by 4,934
Wood: Chemistry, ultrastructure, reactions
(1983) · doi:10.1515/9783110839654 · Cited by 2,846
Roman, M., & Winter, W. T. (2004) · Biomacromolecules · doi:10.1021/bm034519+ · Cited by 1,272
Self-citationPolymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
Araki, J., Wada, M., Kuga, S., & Okano, T. (1998) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(98)00404-x · Cited by 769
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
Nanocomposites of cellulose acetate butyrate reinforced with cellulose nanocrystals
Grunert, M., & Winter, W. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021065905986 · Cited by 465
Revol, J.-F., Godbout, L., Dong, X.-M., Gray, D. G., Chanzy, H., & Maret, G. (1994) · Liquid Crystals · doi:10.1080/02678299408036525 · Cited by 464
Self-citationAqueous Colloidal Solutions of Cellulose Micelles.
Rånby, B. G., Banderet, A., & Sillén, L. G. (1949) · Acta Chemica Scandinavica · doi:10.3891/acta.chem.scand.03-0649 · Cited by 401
Stroobants, A., Lekkerkerker, H. N. W., & Odijk, T. (1986) · Macromolecules · doi:10.1021/ma00162a020 · Cited by 360
Research works printed but not linked: 17
- de Sousa Lima M. M., 2004, Macromol. Rapid Comm., 25, 787
- Mukherjee S. M., 1953, J. Biochim. Biophys. Acta, 10, 511
- Hermans J. J., 1963, Polym. Symp.
- Revol J.-F., 1992, Int. J. Biol. Macromol., 14, 172
- Araki J., 2001, Langmuir, 17, 4496
- Dong X. M., 1998, Cellulose, 5, 32
- Battista O. A., 1955, Ind. Eng. Chem., 48, 335
- Marchessault R. H., 1961, J. Colloid Sci., 16, 344
- Belton P. S., 1989, Macromolecules, 22, 1617
- Sassi J.-F., 1995, Cellulose, 2, 127
- de Sousa Lima M. M., 2002, Langmuir, 18, 996
- Sjöstrom E., 1981, Wood Chemistry: Fundamentals and Applications
- Revol J.-F., 1982, Carbohydr. Polym., 2, 134
- Hanley S. J., 1999, J. Pulp Paper Sci., 25, 200
- de Sousa Lima M. M., 2003, Langmuir, 19, 29
- Dong X. M., 1996, Langmuir, 12, 2082
- Dong X. M., 1997, Langmuir, 13, 2409
Cited by
Items 401–500 of 1,000
Production and Characterisation of Cellulose and Nano-Crystalline Cellulose from Kenaf Core Wood
Chan, C. H., Chia, C. H., Zakaria, S., Ahmad, I. B., & Dufresne, A. (2012) · BioResources · doi:10.15376/biores.8.1.785-794 · Cited by 111
“Panel (a) shows a single particle of NCC and (b) and (c) show agglomerated NCCs. Hydrolysis with high acid concentration can produce NCC (Bondeson et al. 2006; Dong et al. 1998).”
BackgroundApplications of Cellulose Nanocrystals: A Review
Xie, S., Zhang, X., Walcott, M. P., & Lin, H. (2018) · Engineered Science · doi:10.30919/es.1803302 · Cited by 115
Liquid Tubule Formation and Stabilization Using Cellulose Nanocrystal Surfactants
Liu, X., Shi, S., Li, Y., Forth, J., Wang, D., & Russell, T. P. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201706839 · Cited by 95
Piezoelectric Nanocellulose Thin Film with Large-Scale Vertical Crystal Alignment
Wang, J., Carlos, C. R., Zhang, Z., Li, J., Long, Y., Yang, F., Dong, Y., Qiu, X., Qian, Y. J., & Wang, X. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c05680 · Cited by 98
Gao, J., Qiu, Y., Chen, F., Zhang, L., Wei, W., An, X., & Zhu, Q. (2023) · Food Chemistry · doi:10.1016/j.foodchem.2023.135742 · Cited by 96
Kontturi, E., & Vuorinen, T. (2008) · Cellulose · doi:10.1007/s10570-008-9235-3 · Cited by 104
“almost all of the recent studies on CNCs report categorically higher average lengths ( Beck-Candanedo et al. 2005; Fleming et al. 2001; de Souza Lima and Borsali 2004; Araki et al. 1998) than the corresponding LODP values (Battista et al. 1956; Rebuzzi and Evtuguin 2006; Unger et al. 1995).”
BackgroundMethodInfluentialLeão, R. M., Miléo, P. C., Maia, J. M. L. L., & Luz, S. M. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.07.087 · Cited by 97
Boujemaoui, A., Sánchez, C. C., Engström, J., Bruce, C., Fogelström, L., Carlmark, A., & Malmström, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09009 · Cited by 97
Surface Modification of Cellulose Nanocrystals with Succinic Anhydride
Leszczyńska, A., Radzik, P., Szefer, E., Mičušík, M., Omastová, M., & Pielichowski, K. (2019) · Polymers · doi:10.3390/polym11050866 · Cited by 99
Qin, Z.-Y., Tong, G., Chin, Y. C. F., & Zhou, J. (2011) · BioResources · doi:10.15376/biores.6.2.1136-1146 · Cited by 94
Zhang, Z., Sèbe, G., Wang, X., & Tam, K. C. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.094 · Cited by 93
Asadi, A. A., Miller, M., Moon, R. J., & Kalaitzidou, K. (2016) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2016.54 · Cited by 94
“In the current study, the CN type used was CNC, which are whisker-shaped particles (typically, 3–5 nm in width and 5–500 nm in length), extracted by acid hydrolysis of plants [12], and are considered to have properties within the ranges listed above.”
MethodHalahlah, A., Piironen, V. I., Mikkonen, K. S., & Ho, T. M. (2022) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2022.2038080 · Cited by 98
Cranston, E. D., Eita, M., Johansson, E. E., Netrval, J., Salajková, M., Arwin, H., & Wågberg, L. (2011) · Biomacromolecules · doi:10.1021/bm101330w · Cited by 92
Hsieh, Y. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7512-5 · Cited by 99
Probing inhibitory effects of nanocrystalline cellulose: inhibition versus surface charge
Male, K. B., Leung, A. C. W., Montes, J., Kamen, A., & Luong, J. H. T. (2012) · Nanoscale · doi:10.1039/c2nr11886f · Cited by 92
Chowdhury, Z. Z., & Hamid, S. B. A. (2016) · BioResources · doi:10.15376/biores.11.2.3397-3415 · Cited by 92
Lin, Y., Reino, C., Carrera, J., Pérez, J., & van Loosdrecht, M. C. M. (2018) · MicrobiologyOpen · doi:10.1002/mbo3.616 · Cited by 92
Photocurable resin/nanocellulose composite coatings for wood protection
Cataldi, A., Corcione, C. E., Frigione, M., & Pegoretti, A. (2017) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2017.01.019 · Cited by 91
“sources through sulfuric hydrolysis have a L/D value between 20 and 100 [34,35].”
Li, B., Zhang, Y., Wu, C., Guo, B., & Luo, Z. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.047 · Cited by 91
Mechanically Reinforced Injectable Hydrogels
France, K. J. D., Cranston, E. D., & Hoare, T. R. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00981 · Cited by 95
Highly charged cellulose-based nanocrystals as flocculants for harvesting Chlorella vulgaris
Vandamme, D., Eyley, S., den Mooter, G. V., Muylaert, K., & Thielemans, W. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.07.039 · Cited by 96
Zhang, Z., Wang, X., Tam, K. C., & Sèbe, G. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.10.050 · Cited by 91
Raza, M., & Abu‐Jdayil, B. (2022) · Cellulose · doi:10.1007/s10570-021-04371-y · Cited by 94
Colloidal stability and aggregation of lignocellulosic materials in aqueous suspension: A review
Hubbe, M. A., & Rojas, O. J. (2008) · BioResources · doi:10.15376/biores.3.4.1419-1491 · Cited by 90
Pea starch‐based composite films with pea hull fibers and pea hull fiber‐derived nanowhiskers
Chen, Y., Liu, C., Chang, P. R., Anderson, D. P., & Huneault, M. A. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21290 · Cited by 93
A review of cellulose nanocrystals and nanocomposites
Ramires, E. C., & Dufresne, A. (2011) · TAPPI Journal · doi:10.32964/tj10.4.9 · Cited by 96
Two-Dimensional Aggregation and Semidilute Ordering in Cellulose Nanocrystals
Uhlig, M., Fall, A. B., Wellert, S., Lehmann, M., Prévost, S. F., Wågberg, L., von Klitzing, R., & Nyström, G. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b04008 · Cited by 91
Gicquel, E., Bras, J., Rey, C., Putaux, J., Pignon, F., Jean, B., & Martin, C. (2019) · Cellulose · doi:10.1007/s10570-019-02622-7 · Cited by 88
“Their size, shape and surface properties both depend on the origin of the cellulose source and on the hydrolysis conditions (Beck-Candanedo et al. 2005; Bras et al. 2011; Garcı́a et al. 2016).”
Nanocellulose for Sensing Applications
Nguyen, L. H., Naficy, S., Chandrawati, R., & Dehghani, F. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900424 · Cited by 91
Rheological impact of using cellulose nanocrystals (CNC) in cement pastes
Montes, F. J., Fu, T., Youngblood, J. P., & Weiss, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117497 · Cited by 92
Nanocellulose from recycled indigo-dyed denim fabric and its application in composite films
Zhong, T., Dhandapani, R., Liang, D., Wang, J., Wolcott, M. P., Fossen, D. V., & Liu, H. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116283 · Cited by 91
Characterization of bacterial cellulose nanocrystals: Effect of acid treatments and neutralization
Arserim‐Uçar, D. K., Korel, F., Liu, L., & Yam, K. L. (2020) · Food Chemistry · doi:10.1016/j.foodchem.2020.127597 · Cited by 88
Patricio, P. S. D. O., Pereira, F. V., dos Santos, M. C., de Souza, P. P., Roa, J. P. B., & Oréfice, R. L. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37811 · Cited by 89
Isolation and Characterization of Cellulose Whiskers from Kenaf (Hibiscus cannabinus L.) Bast Fibers
Zaini, L. H., Jonoobi, M., Tahir, P. M., & Karimi, S. (2013) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2013.41006 · Cited by 100
“On the other hand, the whisker diameters reported by the present study are smaller than the corresponding values reported for whiskers extracted from mulberry; 20 to 40 nm [30], Tunicate; 10 - 20 nm and Bacterial cellulose 5 - 10 [31].”
ResultFriction and forces between cellulose model surfaces: A comparison
Stiernstedt, J., Nordgren, N., Wågberg, L., Brumer, H., Gray, D. G., & Rutland, M. W. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.06.070 · Cited by 88
Self-citationHemmati, F., Jafari, S. M., & Taheri, R. A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.06.241 · Cited by 90
Thomas, D., Nath, M. S., Mathew, N., Rajasekharan, R., Philip, E., & Latha, M. S. (2020) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2020.101894 · Cited by 95
Lizundia, E., Nguyen, T., Vilas‐Vilela, J. L., Hamad, W. Y., & MacLachlan, M. J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05684b · Cited by 86
Reis, R. S., Tienne, L. G. P., Souza, D. D. H. S., Marques, M. D. F. V., & Monteiro, S. N. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.05.099 · Cited by 91
Tatsumi, M., Teramoto, Y., & Nishio, Y. (2012) · Biomacromolecules · doi:10.1021/bm300310f · Cited by 86
Almashhadani, A. Q., Leh, C. P., Chan, S. Y., Lee, C. Y., & Goh, C. F. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119285 · Cited by 90
Synthesis and Catalytic Features of Hybrid Metal Nanoparticles Supported on Cellulose Nanofibers
Azetsu, A., Koga, H., Isogai, A., & Kitaoka, T. (2011) · Catalysts · doi:10.3390/catal1010083 · Cited by 85
“However, only bundles of cellulose nanofibril fractions were obtained, which in some cases led to drastic decreases in both yield and fiber length [33–39].”
BackgroundNanocellulose in Spun Continuous Fibers: A Review and Future Outlook
Clemons, C. C. (2016) · JOURNAL OF RENEWABLE MATERIALS · doi:10.7569/jrm.2016.634112 · Cited by 90
Mao, J., Osorio‐Madrazo, A., & Laborie, M. G. (2013) · Cellulose · doi:10.1007/s10570-013-9942-2 · Cited by 85
“Dilute acid conditions generate lower yields of CNWs than concentrated acid conditions (Beck-Candanedo et al. 2005; Bondeson et al. 2006; Sadeghifar et al. 2011).”
Chu, G. Q., Wang, X., Yin, H., Shi, Y., Jiang, H., Chen, T., Gao, J., Qu, D., Xu, Y., & Ding, D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b05645 · Cited by 84
Jasmani, L., & Adnan, S. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.061 · Cited by 87
Cellulose Nanocrystal Submonolayers by Spin Coating
Kontturi, E., Johansson, L., Kontturi, K. S., Ahonen, P., Thüne, P. C., & Laine, J. (2007) · Langmuir · doi:10.1021/la701262x · Cited by 93
Grafting of model primary amine compounds to cellulose nanowhiskers through periodate oxidation
Dash, R., Elder, T., & Ragauskas, A. J. (2012) · Cellulose · doi:10.1007/s10570-012-9769-2 · Cited by 84
“These nanowhiskers are defined as elongated rod-like nanoparticles with typical dimension of 100–1,000 nm in length and 5–50 nm in width depending on their source as well as the hydrolysis conditions (Siqueira et al. 2009; Azizi Samir et al. 2005; Beck-Candanedo et al. 2005; Lima and Borsali 2004).”
BackgroundHemraz, U. D., Lu, A., Sunasee, R., & Boluk, Y. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.05.011 · Cited by 87
Klockars, K. W., Tardy, B. L., Borghei, M., Tripathi, A., Greca, L. G., & Rojas, O. J. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00497 · Cited by 83
Modification of cellulose nanocrystals as reinforcement derivatives for wood coatings
Poaty, B., Vardanyan, V., Wilczak, L., Chauve, G., & Riedl, B. (2014) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2014.01.009 · Cited by 82
Sèbe, G., Ham-Pichavant, F., & Pécastaings, G. (2013) · Biomacromolecules · doi:10.1021/bm400854n · Cited by 82
Isolation and Surface Modification of Nanocellulose: Necessity of Enzymes over Chemicals
Afrin, S., & Karim, Z. (2017) · ChemBioEng Reviews · doi:10.1002/cben.201600001 · Cited by 87
Huang, S., Wu, M., Zhu, C., Ma, M., Yang, J., Wu, J., & Xu, Z. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01651 · Cited by 80
Chu, G. Q., Wang, X., Chen, T., Gao, J., Gai, F., Wang, Y., & Xu, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01478 · Cited by 80
Svagan, A. J., Musyanovych, A., Kappl, M., Bernhardt, M., Glaßer, G., Wohnhaas, C. T., Berglund, L. A., Risbo, J., & Landfester, K. (2014) · Biomacromolecules · doi:10.1021/bm500232h · Cited by 80
Bashar, M. M., Zhu, H., Yamamoto, S., & Mitsuishi, M. (2019) · Cellulose · doi:10.1007/s10570-019-02363-7 · Cited by 81
“Typically, CNCs are achieved by controlled hydrolysis of purified material (pulp) with concentrated sulfuric acid producing rod-like CNCs, depending on the reaction time (Revol et al. 1992; Beck-Candanedo et al. 2005; Reid et al. 2017).”
BackgroundPREPARATION AND CHARACTERIZATION OF BAMBOO NANOCRYSTALLINE CELLULOSE
Yu, M., Yang, R., Huang, L., Cao, X., Yang, F. Y., & Liu, D. (2012) · BioResources · doi:10.15376/biores.7.2.1802-1812 · Cited by 89
“The hydrolysis conditions were known to affect the properties of the resulting nanocrystalline cellulose (Beck-Candanedo et al. 2005).”
BackgroundMethodInfluentialRigid polyurethane foam reinforced with cellulose whiskers: Synthesis and characterization
Li, Y., Ren, H., & Ragauskas, A. J. (2010) · Nano-Micro Letters · doi:10.1007/bf03353624 · Cited by 84
Investigation into nanocellulosics versus acacia reinforced acrylic films
Pu, Y., Zhang, J., Elder, T., Deng, Y., Gatenholm, P., & Ragauskas, A. J. (2006) · Composites Part B Engineering · doi:10.1016/j.compositesb.2006.07.008 · Cited by 92
“demonstrated that acid hydrolysis of bleached sulphite black spruce yielded whiskers ranging in size between 147 and 105 nm in length with a diameter of 5 nm [23].”
dos Santos, F. A., Iulianelli, G. C. V., & Tavares, M. I. B. (2016) · Materials Sciences and Applications · doi:10.4236/msa.2016.75026 · Cited by 113
Polyelectrolyte flocculants in harvesting microalgal biomass for food and feed applications
Haver, L. V., & Nayar, S. (2017) · Algal Research · doi:10.1016/j.algal.2017.03.022 · Cited by 85
Zhou, C., & Wu, Q. (2012) · InTech eBooks · doi:10.5772/48727 · Cited by 93
“When lignocellulosic biomass are subjected to pure mechanical shearing, and a combination of chemical, mechanical and/or enzymatic treatment (Beck-Candanedo et al., 2005; Bondeson et al., 2006; Filson et al., 2009), the amorphous regions of cellulose microfibrils are selectively hydrolyzed under…”
Valorization of royal palm tree agroindustrial waste by isolating cellulose nanocrystals
Hafemann, E., Battisti, R., Marangoni, C., & Machado, R. A. F. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.04.086 · Cited by 78
Vaezi, K., Asadpour, G., & Sharifi, S. H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.007 · Cited by 80
Xu, W., Xin, B., & Yang, X. H. (2020) · Cellulose · doi:10.1007/s10570-020-03006-y · Cited by 79
“…can be converted to highly crystalline nanostructures, termed as cellulose nanofibrils (CNFs), which are obtained by cleaving cellulose fibers along the transverse direction and disrupting amorphous regions under certain conditions (Habibi et al. 2010; Beck et al. 2005; Grunert and Winter 2002).”
BackgroundBottom-up assembly of nanocellulose structures
Niinivaara, E., & Cranston, E. D. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116664 · Cited by 80
Mao, J., Heck, B., Reiter, G., & Laborie, M. G. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.001 · Cited by 78
Molnes, S. N., Torrijos, I. D. P., Strand, S., Paso, K. G., & Syverud, K. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.03.019 · Cited by 78
El-Samahy, M. A., Mohamed, S. A. A., Rehim, M. H. A., & Moharam, M. E. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.03.041 · Cited by 78
Bian, H., Chen, L., Dai, H., & Zhu, J. Y. (2017) · Cellulose · doi:10.1007/s10570-017-1430-7 · Cited by 78
Zhang, R., Hu, Z., Peng, H., Liu, P., Wang, Y., Li, J., Lu, J., Wang, Y., Xia, T., & Peng, L. (2023) · Green Chemistry · doi:10.1039/d2gc03744k · Cited by 77
Nanocellulose-Based Composites
Spence, K. L., Habibi, Y., & Dufresne, A. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_7 · Cited by 86
Yang, W. M., Liu, Z., Guo, A., Mackie, A. R., Zhang, L., Liao, W., Mao, L., Yuan, F., & Gao, Y. (2021) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.0c07800 · Cited by 77
Yang, M. H., Wang, Z., Li, M., Yin, Z., & Butt, H. A. (2022) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.21962 · Cited by 81
A novel method for preparing microfibrillated cellulose from bamboo fibers
Nguyen, H., Mai, T. T. T., Nguyen, N. B., Dang, T. D., Le, P. M. L., Dang, T. T., & Tran, V. M. (2013) · Advances in Natural Sciences Nanoscience and Nanotechnology · doi:10.1088/2043-6262/4/1/015016 · Cited by 84
Correia, V. D. C., dos Santos, V. A., Sain, M. M., dos Santos, S. F., Leão, A. L., & Savastano, H. (2016) · Cellulose · doi:10.1007/s10570-016-0996-9 · Cited by 78
Abu-Danso, E., Srivastava, V., Sillanpää, M. E. T., & Bhatnagar, A. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.03.172 · Cited by 78
“Treatment of cellulose with sulfuric acid (H2SO4) produces cellulose crystal and negatively charged surface from the esterification of hydroxyl (OH) groups by sulfate ions from the H2SO4, to form a stable cellulose suspension [24,25].”
BackgroundA viewpoint on the gastrointestinal fate of cellulose nanocrystals
Koshani, R., & Madadlou, A. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.10.023 · Cited by 80
Robust Chiral Organization of Cellulose Nanocrystals in Capillary Confinement
Cherpak, V. V., Korolovych, V. F., Geryak, R. D., Turiv, T., Nepal, D., Kelly, J. A., Bunning, T. J., Lavrentovich, O. D., Heller, W. T., & Tsukruk, V. V. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b02522 · Cited by 82
Beyene, D., Chae, M. S., Dai, J., Danumah, C., Tosto, F., Demesa, A. G., & Bressler, D. C. (2018) · Materials · doi:10.3390/ma11081272 · Cited by 76
“With prolonged exposure time to acid, reduction in CNC size has been previously reported in the literature [8,16].”
BackgroundAlternating Stacking of Nanocrystals and Nanofibers into Ultrastrong Chiral Biocomposite Laminates
Zhang, X., Xiong, R., Kang, S., Yang, Y., & Tsukruk, V. V. (2020) · ACS Nano · doi:10.1021/acsnano.0c06192 · Cited by 76
Yan, C., Yu, H., & Yao, J. (2015) · Cellulose · doi:10.1007/s10570-015-0761-5 · Cited by 77
Ahmadi, M., Madadlou, A., & Sabouri, A. A. (2014) · Food Chemistry · doi:10.1016/j.foodchem.2014.11.038 · Cited by 76
“For example longer reaction times result in shorter nanoparticles with higher surface charges and smaller polydispersity index (Beck-Candanedo et al., 2005).”
BackgroundZargar, S., Jiang, J., Jiang, F., & Tu, Q. (2021) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.2261 · Cited by 75
Cellulose nanofibrils extracted from the byproduct of cotton plant
Miao, X., Lin, J., Tian, F., Li, X., Bian, F., & Wang, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.056 · Cited by 76
CO 2 controlled flocculation of microalgae using pH responsive cellulose nanocrystals
Eyley, S., Vandamme, D., Lama, S., den Mooter, G. V., Muylaert, K., & Thielemans, W. (2015) · Nanoscale · doi:10.1039/c5nr03853g · Cited by 80
Teixeira, R. S. S., da Silva, A. S., Jang, J., Kim, H., Ishikawa, K., Endo, T., Lee, S. H., & Bon, E. P. S. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.087 · Cited by 85
Mild Oxalic‐Acid‐Catalyzed Hydrolysis as a Novel Approach to Prepare Cellulose Nanocrystals
Xu, W., Grénman, H., Liu, J., Kronlund, D., Li, B., Backman, P., Peltonen, J. P. K., Willför, S. M., Sundberg, A., & Xu, C. (2016) · ChemNanoMat · doi:10.1002/cnma.201600347 · Cited by 77
Ultrasonication of spray- and freeze-dried cellulose nanocrystals in water
Beuguel, Q., Tavares, J. R., Carreau, P. J., & Heuzey, M. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.01.035 · Cited by 75
Beck, S., Méthot, M., & Bouchard, J. (2014) · Cellulose · doi:10.1007/s10570-014-0539-1 · Cited by 75
Isolation of Silk Mesostructures for Electronic and Environmental Applications
Zheng, K., Zhong, J., Qi, Z., Ling, S., & Kaplan, D. L. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201806380 · Cited by 76
Aldulaimi, A., & Wanrosli, W. D. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0798-z · Cited by 79
“increase in the surface charge of the NCC particles [17, 20, 33], both of which resulted in a more stable NCC”
BackgroundMethodHua, J., Wu, Y., Han, B., & Zhang, Y. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.06.080 · Cited by 74
Xu, Q., Jin, L., Wang, Y., Chen, H., & Qin, M. (2018) · Cellulose · doi:10.1007/s10570-018-2118-3 · Cited by 74
Dimensions of Biological Cellulose Nanocrystals Maximize Fracture Strength
Sinko, R., Mishra, S., Ruiz, L., Brandis, N., & Keten, S. (2014) · ACS Macro Letters · doi:10.1021/mz400471y · Cited by 73
Wu, C.-N., & Cheng, K. (2016) · Cellulose · doi:10.1007/s10570-016-1114-8 · Cited by 74
Dong, L., Deng, R., Xiao, H., Chen, F., Zhou, Y., Li, J., Chen, S., & Yan, B. (2019) · Cellulose · doi:10.1007/s10570-019-02529-3 · Cited by 73
Lim, W.-L., Gunny, A. A. N., Kasim, F. H., Gopinath, S. C. B., Kamaludin, N. H. I., & Arbain, D. (2021) · Cellulose · doi:10.1007/s10570-021-03914-7 · Cited by 75
Metadata
- Authors
- Beck-Candanedo, S., Roman, M., & Gray, D. G.
- Affiliations
- McGill University (CA)
- Corresponding author
- Gray, Derek G.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-01-12
- Volume
- 6
- Issue
- 2
- Pages
- 1048-1054
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1998033723
- Cited by
- 1,588
- References
- 27
- Citations by year
- 2026: 37 · 2025: 49 · 2024: 62 · 2023: 83 · 2022: 102 · 2021: 120 · 2020: 135 · 2019: 118 · 2018: 113 · 2017: 133 · 2016: 104 · 2015: 88 · 2014: 111 · 2013: 81 · 2012: 80
- FWCI
- 7.60
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Liquid Crystal Research Advancements
- Keywords
- cellulose nanocrystals, sulfuric acid hydrolysis, cholesteric liquid crystals, hydrolysis time, critical concentration, nanocrystal size, polydispersity, bleached pulp
- MeSH terms
- Cellulose, Crystallization, Hydrolysis, Suspensions, Wood, Anisotropy, Phase Transition, Nanostructures
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.