The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Fabrication and Optimization of Methylphenoxy Substituted Polyphosphazene Nanofibers for Biomedical Applications
Abstract
Electrospinning has developed as a unique and versatile process to fabricate ultrathin fibers in the form of nonwoven meshes or as oriented arrays from a variety of polymers. The very small dimension of these fibers can generate a high surface area, which makes them potential candidates for various biomedical and industrial applications. The objective of the present study was to develop nanofibers from polyphosphazenes, a class of inorganic-organic polymers known for high biocompatibility, high-temperature stability, and low-temperature flexibility. Specifically, we evaluated the feasibility of developing bead-free nonwoven nanofiber mesh from poly[bis(p-methylphenoxy)phosphazene] (PNmPh) by electrospinning. The effect of process parameters such as nature of solvent, concentration of the polymer solution, effect of needle diameter, and applied potential on the diameter and morphology (beaded or bead-free) of resulting nanofibers were investigated. It was found that solution of PNmPh in chloroform at a concentration range of 7% (wt/v) to 9% (wt/v) can be readily electrospun to form bead-free fibers at room temperature. The mean diameter of the fibers obtained under optimized spinning condition was found to be approximately 1.2 microm. The bead-free, cylindrical nanofibers formed under the optimized condition showed a slightly irregular surface topography with indentations of a few nanometer scale. Further, the electrospun nanofiber mats supported the adhesion of bovine coronary artery endothelial cells (BCAEC) as well as promoted the adhesion and proliferation of osteoblast like MC3T3-E1 cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Use of polyphosphazenes for skeletal tissue regeneration
Laurencin, C. T., Norman, M. E., Elgendy, H. M., El‐Amin, S. F., Allcock, H. R., Pucher, S. R., & Ambrosio, A. A. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820270716 · Cited by 179
Self-citationThin layer grafts of Poly[bis(methoxyethoxy-ethoxy)-phosphazene] on organic polymer surfaces
Allcock, H. R., Fitzpatrick, R. J., Visscher, K., & Salvati, L. (1992) · Chemistry of Materials · doi:10.1021/cm00022a007 · Cited by 24
Self-citation
Cited by
Biomedical applications of biodegradable polymers
Ulery, B. D., Nair, L. S., & Laurencin, C. T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22259 · Cited by 2,206
Self-citationNanofibers and their applications in tissue engineering
Vasita, R., & Katti, D. S. (2006) · International Journal of Nanomedicine · doi:10.2147/nano.2006.1.1.15 · Cited by 988
Functional electrospun nanofibrous scaffolds for biomedical applications
Liang, D., Hsiao, B. S., & Chu, B. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.021 · Cited by 972
Stem cell-based tissue engineering with silk biomaterials
Wang, Y., Kim, H.-J., Vunjak-Novakovic, G., & Kaplan, D. L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.07.008 · Cited by 968
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
Metadata
- Authors
- Nair, L. S., Bhattacharyya, S., Bender, J. D., Greish, Y. E., Brown, P. W., Allcock, H. R., & Laurencin, C. T.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-10-22
- Volume
- 5
- Issue
- 6
- Pages
- 2212-2220
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1994753048
- Cited by
- 169
- References
- 2
- FWCI
- 6.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.