Preparation and Properties of Plasticized Poly(lactic acid) Films
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Poly(lactic acid), PLA, was blended with monomeric and oligomeric plasticizers in order to enhance its flexibility and thereby overcome its inherent problem of brittleness. Differential scanning calorimetry, dynamic mechanical analysis, transmission electron microscopy, and tensile testing were used to investigate the properties of the blends. Monomeric plasticizers, such as tributyl citrate, TbC, and diethyl bishydroxymethyl malonate, DBM, drastically decreased the T(g) of PLA, but the blends showed no morphological stability over time since rapid cold crystallization caused a size reduction of the amorphous domains in PLA. Consequently, the ability of PLA to accommodate the plasticizer diminished with the increase in crystallinity and migration of the plasticizer occurred. Increasing the molecular weight of the plasticizers by synthesizing oligoesters and oligoesteramides resulted in blends that displayed T(g) depressions slightly smaller than with the monomeric plasticizers. The compatibility with PLA was dependent on the molecular weight of the oligomers and on the presence or not of polar amide groups that were able to positively interact with the PLA chains. Aging the materials at ambient temperature revealed that the enhanced flexibility as well as the morphological stability of the films plasticized with the oligomers could be maintained as a result of the higher molecular weight and the polar interactions with PLA.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
Dubois, P., Jacobs, C., Jerome, R., & Teyssie, P. (1991) · Macromolecules · doi:10.1021/ma00009a022 · Cited by 477
Polymers: Chemistry and physics of modern materials
Pearce, E. M. (1992) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1992.080300836 · Cited by 471
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid)
Ljungberg, N., & Wesslén, B. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11077 · Cited by 423
Self-citationPresent and Future of PLA Polymers
Vert, M., Schwarch, G., & Coudane, J. (1995) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329508010289 · Cited by 365
Research works printed but not linked: 7
- Bonsignore, P. V.; Coleman, R. D.Nonwovens Conference Proceedings; TAPPI Press: Atlanta, GA, 1992; p 129.
- Wehrenberg R. H., II., 1981, Mater. Eng., 94, 63
- Lipinsky E. S., 1986, Chem. Eng. Prog., 82, 26
- Lostocco M. R., 1998, Macromol. Symp.
- Lundgren D., 1996, Patent 5,525,646
- Yolles S., 1976, Parenter. Drug Assoc., 30, 306
- Yolles S., 1978, J. Parenter. Drug Assoc., 32, 188
Cited by
Items 101–200 of 331
Microbial monomers custom-synthesized to build true bio-derived aromatic polymers
Fujita, T., Nguyen, H. D., Ito, T., Zhou, S., Osada, L., Tateyama, S., Kaneko, T., & Takaya, N. (2013) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-013-5078-4 · Cited by 58
Hydrolytic degradation behaviour of sucrose palmitate reinforced poly(lactic acid) nanocomposites
Valapa, R. B., Pugazhenthi, G., & Katiyar, V. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.04.040 · Cited by 62
Biodegradable polymer composites based on synthetic and natural polymers of various classes
Rogovina, S. Z. (2016) · Polymer Science Series C · doi:10.1134/s1811238216010100 · Cited by 65
Llanes, L. C., Clasen, S. H., Pires, A. T. N., & Gross, I. P. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.110112 · Cited by 59
Gug, J., & Sobkowicz, M. J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43350 · Cited by 58
Shi, K., Yu, H., Rao, S. L., & Lee, T.-C. (2012) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf3001444 · Cited by 57
Xu, H., Xie, L., Jiang, X. Q., Li, X., Li, Y., Zhang, Z., Zhong, G., & Li, Z. (2013) · The Journal of Physical Chemistry B · doi:10.1021/jp409021q · Cited by 60
Phuphuak, Y., Miao, Y., Zinck, P., & Chirachanchai, S. (2013) · Polymer · doi:10.1016/j.polymer.2013.10.006 · Cited by 59
Djellali, S., Haddaoui, N., Sadoun, T., Bergeret, A., & Grohens, Y. (2013) · Iranian Polymer Journal · doi:10.1007/s13726-013-0126-6 · Cited by 60
Brüster, B., Adjoua, Y.-O., Dieden, R. A., Grysan, P., Federico, C. E., Berthé, V., & Addiego, F. (2019) · Polymers · doi:10.3390/polym11081363 · Cited by 56
Mechanical, thermal and morphological properties of poly(lactic acid)/natural rubber nanocomposites
Bijarimi, M., Ahmad, S., & Rasid, R. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413496487 · Cited by 51
Aligned plasticized polylactic acid cellulose nanocomposite tapes: Effect of drawing conditions
Singh, A. A., Geng, S., Herrera, N., & Oksman, K. (2017) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2017.10.019 · Cited by 51
Bajwa, D. S., Shojaeiarani, J., Liaw, J. D., & Bajwa, S. G. (2021) · Journal of Composites Science · doi:10.3390/jcs5020043 · Cited by 50
Perego, G., & Cella, G. D. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch11 · Cited by 58
Thermal, mechanical, and rheological properties of polylactide/poly(1,2‐propylene glycol adipate)
Zhang, H., Fang, J., Ge, H., Han, L., Wang, X., Hao, Y., Han, C., & Dong, L. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23238 · Cited by 51
Investigating the effect of multi-functional chain extenders on PLA/PEG copolymer properties
Ghalia, M. A., & Dahman, Y. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.11.003 · Cited by 50
Turco, R., Tesser, R., Cucciolito, M. E., Fagnano, M., Ottaiano, L., Mallardo, S., Malinconico, M., Santagata, G., & Serio, M. D. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05519 · Cited by 52
Vijayarajan, S., Selke, S. E. M., & Matuana, L. M. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300226 · Cited by 54
Agüero, Á., Lascano, D., Martínez, J. I., Gómez-Caturla, J., Arrieta, M. P., & Balart, R. (2023) · Industrial Crops and Products · doi:10.1016/j.indcrop.2023.116971 · Cited by 52
Lai, S., Liu, Y.-H., Huang, C., & Don, T. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1253-0 · Cited by 50
Khatsee, S., Daranarong, D., Punyodom, W., & Worajittiphon, P. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46486 · Cited by 52
Coltelli, M., Aliotta, L., Vannozzi, A., Morganti, P., Panariello, L., Danti, S., Neri, S., Fernandez-Avila, C., Fusco, A., Donnarumma, G., et al. (2020) · Journal of Functional Biomaterials · doi:10.3390/jfb11020021 · Cited by 50
Zhao, Y., Qu, J., Feng, Y., Wu, Z., Chen, F., & Tang, H. (2011) · Polymers for Advanced Technologies · doi:10.1002/pat.1937 · Cited by 47
Phase Segregation in Polystyrene−Polylactide Blends
Leung, B. O., Hitchcock, A. P., Brash, J. L., Schöll, A., & Doran, A. (2009) · Macromolecules · doi:10.1021/ma802176b · Cited by 48
Radiation-induced grafting of acrylic acid onto polypropylene film and its biodegradability
Mandal, D. K., Bhunia, H., Bajpai, P. K., Chaudhari, C. V., Dubey, K. A., & Varshney, L. (2016) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2016.02.011 · Cited by 45
Cellulosic Nanocomposites from Natural Fibers for Medical Applications: A Review
Khalil, H. P. S. A., Bhat, A. H., Bakar, A. A., Tahir, P. M., Zaidul, I. S. M., & Jawaid, M. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_72 · Cited by 53
Ishimoto, K., Arimoto, M., Okuda, T., Yamaguchi, S., Aso, Y., Ohara, H., Kobayashi, S., Ishii, M., Morita, K., Yamashita, H., et al. (2012) · Biomacromolecules · doi:10.1021/bm301212a · Cited by 45
Mechanical properties of poly(lactid acid) plasticized by cardanol derivatives
Greco, A., Ferrari, F., & Maffezzoli, A. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.11.028 · Cited by 47
Frediani, M., Sémeril, D., Mariotti, A., Rosi, L., Frediani, P., Rosi, L., Matt, D., & TOUPET, L. J. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200800383 · Cited by 44
Mechanical properties and porosity of polylactide for biomedical applications
Sawalha, H., Schroën, K. G. P. H., & Boom, R. M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27116 · Cited by 50
Raj, A., Yousfi, M., Prashantha, K., & Samuel, C. (2024) · Polymers · doi:10.3390/polym16131776 · Cited by 50
Gonçalves, C. M. B., Tomé, L. C., Garcia, H., Brandão, L., Mendes, A. M. M., & Marrucho, I. M. (2012) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2012.12.034 · Cited by 52
Wang, R., Wan, C., Wang, S., & Zhang, Y. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21490 · Cited by 45
Plasticized properties of poly (lactic acid) and triacetine blends
Yeh, J., Huang, C., Chai, W., & Chen, K. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29761 · Cited by 43
Crystallization of triethyl‐citrate‐plasticized poly(lactic acid) induced by chitin nanocrystals
Singh, S., Rulduà, M. L. M., & Oksman, K. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.47936 · Cited by 43
Shen, T., Xu, Y., Cai, X., Ma, P., Dong, W., & Chen, M. (2016) · RSC Advances · doi:10.1039/c6ra04050k · Cited by 43
Xiao, H., Liu, F., Jiang, T., & Yeh, J. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32225 · Cited by 43
The Effect of Core–Shell Ratio of Acrylic Impact Modifier on Toughening PLA
Li, W., Zhang, Y., Wu, D., Li, Z., Zhang, H., Dong, L., Sun, S., Deng, Y., & Zhang, H. (2015) · Advances in Polymer Technology · doi:10.1002/adv.21632 · Cited by 38
Yun, X., Li, X., Jin, Y., Sun, W., & Dong, T. (2018) · Polymer Science Series A · doi:10.1134/s0965545x18020141 · Cited by 38
Valapa, R., Hussain, S., Iyer, P. K., Pugazhenthi, G., & Katiyar, V. (2015) · Journal of Polymer Research · doi:10.1007/s10965-015-0823-2 · Cited by 37
Valapa, R. B., Pugazhenthi, G., & Katiyar, V. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41320 · Cited by 37
Karimi, S., Ghasemi, I., & Abbassi‐Sourki, F. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.10.004 · Cited by 36
Improvement of Poly(lactide) Ductile Properties by Plasticization with Biobased Tartaric Acid Ester
Gómez-Caturla, J., Dominguez‐Candela, I., Medina-Casas, M. P., Martínez, J. I., Moreno, V., Balart, R., & García‐García, D. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200694 · Cited by 38
Arjmandi, R., Hassan, A., Kassim, M. H. M., & Zakaria, Z. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.07.062 · Cited by 35
Jia, Z., Tan, J., Han, C., Yang, Y., & Dong, L. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30638 · Cited by 43
Wu, C.-S. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200700181 · Cited by 36
Toughening of poly(l-lactic acid) with Cu3BTC2 metal organic framework crystals
Kathuria, A., Abiad, M. G., & Auras, R. A. (2013) · Polymer · doi:10.1016/j.polymer.2013.11.005 · Cited by 34
Feng, L., Bian, X., Chen, Z., Li, G., & Chen, X. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.06.025 · Cited by 36
Cecchi, T., Giuliani, A., Iacopini, F., Santulli, C., Fabrizio Sarasini, A., & Tirillò, J. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-04187-1 · Cited by 34
Research progress in fully biorenewable tough blends of polylactide and green plasticizers
Mazidi, M. M., Arezoumand, S., & Zare, L. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.135345 · Cited by 36
Novel blends of polylactide with ethylene glycol derivatives of POSS
Zubrowska, A., Piórkowska, E., Kowalewska, A., & Cichorek, M. (2014) · Colloid & Polymer Science · doi:10.1007/s00396-014-3344-3 · Cited by 34
Study on Tough Blends of Polylactide and Acrylic Impact Modifier
Song, X., Chen, Y., Xu, Y., & Wang, C. (2014) · BioResources · doi:10.15376/biores.9.2.1939-1952 · Cited by 33
Thangavel, G., Mohanty, S., & Nayak, S. K. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8509-4 · Cited by 33
Cicogna, F., Coiai, S., Monte, C. D., Spiniello, R., Fiori, S., Franceschi, M., Braca, F., Cinelli, P., Fehri, S. M. K., Lazzeri, A., et al. (2017) · Polymer International · doi:10.1002/pi.5356 · Cited by 34
Petchwattana, N., Sanetuntikul, J., & Narupai, B. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-1012-7 · Cited by 34
Crystallization kinetics of polylactide: Reactive plasticization and reprocessing effects
Brüster, B., Montesinos, A., Reumaux, P., Pérez‐Camargo, R. A., Múgica, A., Zubitur, M., Müller, A. J., Dúbois, P., & Addiego, F. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.01.009 · Cited by 36
Mendoza-Duarte, M. E., Estrada-Moreno, I. A., López‐Martínez, E. I., & Vega‐Ríos, A. (2023) · Polymers · doi:10.3390/polym15020305 · Cited by 35
Chen, J., He, H., Yu, P., Jia, Y., Meng, S., & Wang, J. (2017) · Polymer Composites · doi:10.1002/pc.24314 · Cited by 32
Srinivas, V., van Hooy‐Corstjens, C. S. J., Rastogi, S., & Harings, J. (2020) · Polymer · doi:10.1016/j.polymer.2020.122637 · Cited by 32
Jouannin, C., Tourné‐Péteilh, C., Darcos, V., Sharkawi, T., Devoisselle, J., Gaveau, P., Dieudonné, P., Vioux, A., & Viau, L. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb00264d · Cited by 32
Phetwarotai, W., Maneechot, H., Kalkornsurapranee, E., & Phusunti, N. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4321 · Cited by 31
Tsujimoto, T., Haza, Y., Yin, Y., & Uyama, H. (2011) · Polymer Journal · doi:10.1038/pj.2011.3 · Cited by 32
Yuntawattana, N., Gregory, G. L., Carrodeguas, L. P., & Williams, C. K. (2021) · ACS Macro Letters · doi:10.1021/acsmacrolett.1c00216 · Cited by 30
Poly(lactic acid) plasticized by biodegradable glyceryl lactate
Yuan, Y., Hu, Z., Fu, X., Jiang, L., Xiao, Y., Hu, K., Yan, P., & Lei, J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43460 · Cited by 35
Choi, K., Lim, S.-W., Choi, M., Kim, Y., Han, D.-H., & Ha, C. (2014) · Polymer Bulletin · doi:10.1007/s00289-014-1251-x · Cited by 31
Safandowska, M., Różański, A., & Gałęski, A. (2020) · Polymers · doi:10.3390/polym12030561 · Cited by 32
Safari, M., Kasmi, N., Pisani, C., Berthé, V., Müller, A. J., & Habibi, Y. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.06.056 · Cited by 30
Lorenzo, M. L. D., Rubino, P., & Cocca, M. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40372 · Cited by 30
Kathuria, A., Abiad, M. G., & Auras, R. A. (2013) · Polymer International · doi:10.1002/pi.4478 · Cited by 30
Properties of poly(ethylene glycol)-grafted poly(lactic acid) plasticized with poly(ethylene glycol)
Choi, K., Lim, S.-W., Choi, M., Han, D.-H., & Ha, C. (2014) · Macromolecular Research · doi:10.1007/s13233-014-2182-y · Cited by 27
Guan, J., Han, C., Guan, Y., Zhang, S., Yun, J., & Yao, S. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2018.04.005 · Cited by 27
Thumsorn, S., Prasong, W., Ishigami, A., Kurose, T., Kobayashi, Y., & Itô, H. (2023) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp7010044 · Cited by 27
Liu, Y., Chen, W., & Kim, H. (2012) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2012.662077 · Cited by 27
Formation of Poly(L-lactide) mesophase and its chain mobility dependent kinetics
Liang, Y., Tang, H., Zhong, G., & Li, Z. (2014) · Chinese Journal of Polymer Science · doi:10.1007/s10118-014-1505-y · Cited by 28
Ran, X., Jia, Z., Han, C., Yang, Y., & Dong, L. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.31701 · Cited by 27
Amirou, S., Zerizer, A., Haddadou, I., & Merlin, A. (2013) · HAL · doi:10.5897/sre2013.5507 · Cited by 34
Tailoring Oligomeric Plasticizers for Polylactide through Structural Control
Xuan, W., Odelius, K., & Hakkarainen, M. (2022) · ACS Omega · doi:10.1021/acsomega.2c01160 · Cited by 27
Saad, G. R., Elsawy, M. A., & Aziz, M. S. A. (2016) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-016-5910-z · Cited by 27
Sun, S.-T., Wang, H., Huang, D., Ding, Y., Zhang, Y., Song, D., Zhang, K., Pan, L., & Li, Y. (2020) · Chinese Journal of Polymer Science · doi:10.1007/s10118-020-2439-1 · Cited by 26
Controlling stereocomplex crystal morphology in poly(lactide) through chain alignment
Tuccitto, A. V., Anstey, A., Sansone, N. D., Park, C. B., & Lee, P. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.081 · Cited by 26
The preparation of novel nanofilled polymer composites using poly(l-lactic acid) and protein fibers
Byrne, N., Hameed, N., Werzer, O., & Guo, Q. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.12.002 · Cited by 25
Moeini, A., van Reenen, A. J., van Otterlo, W. A. L., Cimmino, A., Masi, M., Lavermicocca, P., Valerio, F., Immirzi, B., Santagata, G., Malinconico, M., et al. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.112134 · Cited by 25
Detyothin, S., Kathuria, A., Jaruwattanayon, W., Selke, S. E. M., & Auras, R. A. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch16 · Cited by 31
Zaborowska, M., Bernat, K., Pszczółkowski, B., Wojnowska‐Baryła, I., & Kulikowska, D. (2021) · Sustainability · doi:10.3390/su13126818 · Cited by 26
Prempeh, N. A., Li, J., Liu, D., Das, K., Maiti, S., & Zhang, Y. (2014) · Polymer Science Series A · doi:10.1134/s0965545x14060182 · Cited by 24
Zhang, P., Gao, D., Zou, P., & Wang, B. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44683 · Cited by 25
Plasticization of poly(lactic acid) using different molecular weight of Poly(ethylene glycol)
Septevani, A. A., & Bhakri, S. (2017) · AIP conference proceedings · doi:10.1063/1.5011895 · Cited by 23
Toughening Polylactide with Graft-Block Polymers
Lee, B., Maher, M. J., Schibur, H. J., Hillmyer, M. A., & Bates, F. S. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00036 · Cited by 23
Hazer, B., Baysal, B. M., Köseoğlu, A. G., Beşırlı, N., & Taşkın, E. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0406-1 · Cited by 24
Microcrystalline Cellulose from Oil Palm Empty Fruit Bunches as Filler in Polylactic Acid
Kassim, M. H. M., Hassan, A., Arjmandi, R., Zakaria, Z., Marliana, M. M., Syakir, M., & Rawi, N. F. M. (2016) · Polymers and Polymer Composites · doi:10.1177/096739111602400901 · Cited by 24
Role of the plasticizers on the crystallization of PLA and its composites with mesoporous MCM-41
Blázquez‐Blázquez, E., Barranco‐García, R., Díez‐Rodríguez, T. M., Cerrada, M. L., & Pérez, E. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-09556-x · Cited by 25
Glycerol-derived organic carbonates: environmentally friendly plasticizers for PLA
Seo, H. J., Seo, Y. H., Park, S. U., Lee, H. J., Lee, M. R., Park, J. H., Cho, W. Y., Lee, P. C., & Lee, B. Y. (2024) · RSC Advances · doi:10.1039/d3ra08922c · Cited by 24
Zhao, Y., Lang, X., Pan, H., Wang, Y., Yang, H., Zhang, H., Zhang, H., & Dong, L. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24171 · Cited by 23
Wang, R., Wang, S., & Zhang, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30353 · Cited by 23
Novel Ternary Polymer Electrolytes Based on Poly(lactic acid) from Sustainable Sources
Osada, I., Hosseini, S. M., Jeong, S., & Passerini, S. (2016) · ChemElectroChem · doi:10.1002/celc.201600653 · Cited by 22
Study of the Properties of Plasticised Poly(Lactic Acid) with Poly(1,3-Butylene Adipate)
Ning, W., Xingxiang, Z., Jiugao, Y., & Jianming, F. (2008) · Polymers and Polymer Composites · doi:10.1177/096739110801600903 · Cited by 28
Zhao, Y., Huang, C., Huang, X., Huang, H., Zhao, H., Wang, S., & Liu, S. (2020) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2020.100513 · Cited by 22
Wei, T., Pang, S., Xu, N., Pan, L., Zhang, Z., Xu, R., Ma, N., & Lin, Q. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41308 · Cited by 21
Morán, J., Ludueña, L. N., Phuong, V. T., Cinelli, P., Lazzeri, A., & Álvarez, V. A. (2016) · Polymers and Polymer Composites · doi:10.1177/096739111602400505 · Cited by 21
Preparation and characterization of poly(lactic acid) with adipate ester added as a plasticizer
Tsou, C., Gao, C., Guzman, M. D., Wu, D., Hung, W., Yuan, L., Suen, M., & Yeh, J. (2018) · Polymers and Polymer Composites · doi:10.1177/0967391118809210 · Cited by 21
Metadata
- Authors
- Ljungberg, N., & Wesslén, B.
- Affiliations
- Lund University (SE)
- Corresponding author
- Ljungberg, Nadia
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-04-08
- Volume
- 6
- Issue
- 3
- Pages
- 1789-1796
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2007200637
- Cited by
- 331
- References
- 42
- Citations by year
- 2026: 9 · 2025: 5 · 2024: 22 · 2023: 15 · 2022: 14 · 2021: 13 · 2020: 19 · 2019: 12 · 2018: 19 · 2017: 20 · 2016: 30 · 2015: 21 · 2014: 24 · 2013: 25 · 2012: 16
- FWCI
- 2.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Lund University Publications (Lund University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
- Keywords
- polylactic acid, plasticized films, plasticizers, tributyl citrate, oligoesters, glass transition temperature depression, cold crystallization, plasticizer migration, polymer blends, blend compatibility, aging materials, flexibility, crystallinity
- MeSH terms
- Plasticizers, Polyesters, Polymers, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.