Preparation and Properties of Plasticized Poly(lactic acid) Films
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Poly(lactic acid), PLA, was blended with monomeric and oligomeric plasticizers in order to enhance its flexibility and thereby overcome its inherent problem of brittleness. Differential scanning calorimetry, dynamic mechanical analysis, transmission electron microscopy, and tensile testing were used to investigate the properties of the blends. Monomeric plasticizers, such as tributyl citrate, TbC, and diethyl bishydroxymethyl malonate, DBM, drastically decreased the T(g) of PLA, but the blends showed no morphological stability over time since rapid cold crystallization caused a size reduction of the amorphous domains in PLA. Consequently, the ability of PLA to accommodate the plasticizer diminished with the increase in crystallinity and migration of the plasticizer occurred. Increasing the molecular weight of the plasticizers by synthesizing oligoesters and oligoesteramides resulted in blends that displayed T(g) depressions slightly smaller than with the monomeric plasticizers. The compatibility with PLA was dependent on the molecular weight of the oligomers and on the presence or not of polar amide groups that were able to positively interact with the PLA chains. Aging the materials at ambient temperature revealed that the enhanced flexibility as well as the morphological stability of the films plasticized with the oligomers could be maintained as a result of the higher molecular weight and the polar interactions with PLA.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
Dubois, P., Jacobs, C., Jerome, R., & Teyssie, P. (1991) · Macromolecules · doi:10.1021/ma00009a022 · Cited by 477
Polymers: Chemistry and physics of modern materials
Pearce, E. M. (1992) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1992.080300836 · Cited by 471
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid)
Ljungberg, N., & Wesslén, B. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11077 · Cited by 423
Self-citationPresent and Future of PLA Polymers
Vert, M., Schwarch, G., & Coudane, J. (1995) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329508010289 · Cited by 365
Research works printed but not linked: 7
- Bonsignore, P. V.; Coleman, R. D.Nonwovens Conference Proceedings; TAPPI Press: Atlanta, GA, 1992; p 129.
- Wehrenberg R. H., II., 1981, Mater. Eng., 94, 63
- Lipinsky E. S., 1986, Chem. Eng. Prog., 82, 26
- Lostocco M. R., 1998, Macromol. Symp.
- Lundgren D., 1996, Patent 5,525,646
- Yolles S., 1976, Parenter. Drug Assoc., 30, 306
- Yolles S., 1978, J. Parenter. Drug Assoc., 32, 188
Cited by
Items 201–300 of 331
Alam, J., Alam, M., Dass, L. A., Shanmugharaj, A. M., & Mohan, R. (2014) · Polymer Composites · doi:10.1002/pc.22875 · Cited by 21
Blends of high density polyethylene and poly( l ‐lactic acid): Mechanical and thermal properties
Madhu, G., Bhunia, H., & Bajpai, P. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23764 · Cited by 21
Blázquez‐Blázquez, E., Barranco‐García, R., Díez‐Rodríguez, T. M., Cerrada, M. L., & Pérez, E. (2023) · Polymers · doi:10.3390/polym15030624 · Cited by 20
Mohan, R., Subha, J., & Alam, J. (2016) · Advances in Polymer Technology · doi:10.1002/adv.21664 · Cited by 22
Gonçalves, F. A. M. M., Cruz, S. M. A., Coelho, J. F. J., & Serra, A. C. (2020) · Polymers · doi:10.3390/polym12112688 · Cited by 20
Gazquez-Navarro, J. J., Sanoguera, D. G., Balart, R., García‐García, D., & Gómez-Caturla, J. (2024) · Journal of Polymers and the Environment · doi:10.1007/s10924-024-03396-1 · Cited by 23
Cui, L., Wang, Y., Guo, Y., Liu, Y., Zhao, J., Zhang, C., & Zhu, P. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3795 · Cited by 20
Sawalha, H., Schroën, K. G. P. H., & Boom, R. M. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21557 · Cited by 22
Design of sustainable 3D printable polylactic acid composites with high lignin content
Ren, Z., Zhou, X., Ding, K., Ji, T., Sun, H. Y., Chi, X., Wei, Y., Xu, M., Cai, L., & Xia, C. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127264 · Cited by 19
Influence of acrylic impact modifier on plasticized polylactide blown films
Zhang, H., Liang, H., Bian, J., Hao, Y., Han, L., Wang, X., Zhang, G., Liu, S., & Dong, L. (2013) · Polymer International · doi:10.1002/pi.4615 · Cited by 21
Frediani, M., Rosi, L., Camaiti, M., Berti, D., Mariotti, A., Comucci, A., Vannucci, C., & Malesci, I. (2010) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201000034 · Cited by 18
Thangavel, G., Chung, J. S., & Nayak, S. K. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0771-x · Cited by 21
Biodegradable Polymer Materials Based on Polylactide
Rogovina, S. Z., Aleksanyan, K. V., Vladimirov, L. V., & Berlin, A. A. (2019) · Russian Journal of Physical Chemistry B · doi:10.1134/s1990793119050099 · Cited by 18
Majumder, R., Das, A., Mukherjee, A., & Kumar, S. (2022) · Wiley eBooks · doi:10.1002/9781119702313.ch2 · Cited by 18
Heinze, D. A., Mang, T., Popescu, C., & Weichold, O. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.05.015 · Cited by 17
Biodegradable polymer composites based on polylactide and cellulose
Rogovina, S. Z., Aleksanyan, K. V., Kosarev, A. A., Ivanushkina, N. E., Prut, E. V., & Берлин, А. А. (2016) · Polymer Science Series B · doi:10.1134/s1560090416010061 · Cited by 18
Amrutha, N., Murthy, P. S., & Reddy, J. P. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.120360 · Cited by 16
Reactive plasticization of poly(lactide) with epoxy functionalized cardanol
Mihai, I., Hassouna, F., Fouquet, T., Laachachi, A., Raquez, J., Ahrach, H. I. E., & Dúbois, P. (2017) · Polymer Engineering and Science · doi:10.1002/pen.24647 · Cited by 17
Xu, H., Wong, K. H., Lai, N. Y. G., Yu, H., & Li, J. (2023) · Sustainable materials and technologies · doi:10.1016/j.susmat.2023.e00708 · Cited by 16
Gross, I. P., Saatkamp, R. H., Sanches, M. P., Parize, A. L., & Pires, A. T. N. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c01273 · Cited by 15
Najera-Losada, L., Rincón, P. C. N., Orjuela, Á., Gómez-Caturla, J., Fenollar, O., & Balart, R. (2024) · Journal of Polymers and the Environment · doi:10.1007/s10924-024-03415-1 · Cited by 16
Valapa, R., Hussain, S., Iyer, P. K., Pugazhenthi, G., & Katiyar, V. (2015) · Polymer Bulletin · doi:10.1007/s00289-015-1468-3 · Cited by 15
Tábi, T., & Pölöskei, K. (2021) · Periodica Polytechnica Mechanical Engineering · doi:10.3311/ppme.18246 · Cited by 14
Recent development in preparation of food packaging films using biopolymers
Suresh, S., Pushparaj, C., & Subramani, R. (2021) · Food Research · doi:10.26656/fr.2017.5(6).082 · Cited by 14
Plasticized branched aliphatic oligoesters as potential mucoadhesive drug carriers
Šnejdrová, E., Dittrich, M., & Drastík, M. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.10.030 · Cited by 14
Lim, S.-W., Choi, M., Jeong, J., Park, E.-Y., & Ha, C. (2016) · Composite Interfaces · doi:10.1080/09276440.2016.1175168 · Cited by 14
Plasticization of Poly‐ L ‐lactide with L ‐lactide, D ‐lactide, and D , L ‐lactide monomers
López‐Rodríguez, N., & Sarasua, J.-R. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23469 · Cited by 19
Hao, Y., Yang, H., Zhang, G., Zhang, H., Gao, G., & Dong, L. (2015) · Chinese Journal of Polymer Science · doi:10.1007/s10118-015-1714-z · Cited by 14
Wei, X.-Y., Li, W., Li, J., & Niu, X.-T. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.133148 · Cited by 14
Yeh, J., Tsou, C., Lu, W., Li, Y., Xiao, H. W., Huang, C., Chen, K., Wu, C.-S., & Chai, W. (2010) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21954 · Cited by 15
Luo, F., Li, J., Fan, J., Weng, Y., & Ren, J. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03739-1 · Cited by 15
Properties of poly(lactic acid)/cellulose nanofiber biocomposites: Effect of polymeric plasticizers
Srisawat, K., Harnnarongchai, W., Sirisinha, C., & Sirisinha, K. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.12.203 · Cited by 15
Arezoumand, S., Kaffashi, B., & Naderi, G. (2023) · Polymer Composites · doi:10.1002/pc.27241 · Cited by 13
Johar, M., Zarkasi, K. Z., Zaini, N. A. M., & Rusli, A. (2023) · Journal of Polymer Research · doi:10.1007/s10965-023-03630-9 · Cited by 16
Zhijun, Q., Xingxiang, Z., Ning, W., & Jianming, F. (2008) · Polymer Composites · doi:10.1002/pc.20730 · Cited by 13
Zheng, M. L., & Luo, X. (2013) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2013.812219 · Cited by 13
Effects of posttreatment on the properties of modified PLLA/PDLA fibers
Tu, C., Cao, X., Zhang, R., Wang, D., & Cui, L. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4460 · Cited by 13
Bioabsorbable PLA/PHA composite pins for orthopedic applications: In vitro and in vivo study
Sim, E. J., Sakthiabirami, K., Jung, T., Jo, S. K., Lee, S. J., Xu, P., Sung, H. K., Lee, E. H., Yoon, K. C., Kang, K. S., et al. (2025) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2025.03.023 · Cited by 13
Sustainable green poly(lactic acid) (PLA)/eggshell powder (ESP) biocomposites
Bijarimi, M., Azlan, S. A., Norazmi, M., Normaya, E., & Desa, M. S. Z. M. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.05.265 · Cited by 12
Preparation and characterization of polylactide/montmorillonite nanocomposites
Wu, X., Yuan, J., Yong-fu, Y., & Wang, Y. (2009) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-009-4562-2 · Cited by 12
Diethylene glycol monobutyl ether adipate as a novel plasticizer for biodegradable polylactide
Hao, Y., Yang, H., Zhang, H., Zhang, G., Bai, Y., Gao, G., & Dong, L. (2016) · Polymer Bulletin · doi:10.1007/s00289-016-1646-y · Cited by 12
Preparation and properties of poly(lactic acid)/lipophilized graphene oxide nanohybrids
Jeong, J., Choi, M., Nagappan, S., Lee, W., & Ha, C. (2017) · Polymer International · doi:10.1002/pi.5478 · Cited by 12
Zeolite Additives for Flexible Packaging Polymers: Current Status Review and Future Perspectives
Fornaro, M., Liguori, B., Ambrogi, V., & Caputo, D. (2024) · Polymers · doi:10.3390/polym16233399 · Cited by 14
Kangallı, E., & Bayraktar, E. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52521 · Cited by 11
Sun, T., Li, Y., Wang, Y., Yang, Q., Du, J., Hu, J. S., Sarula, Dong, T., & Yun, X. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131746 · Cited by 11
Wan, T., Lin, Y., & Tu, Y. (2016) · Polymer Engineering and Science · doi:10.1002/pen.24375 · Cited by 11
dos Santos, T. P., Dias, K. B., Bischoff, E., & Mauler, R. S. (2022) · Journal of Polymer Research · doi:10.1007/s10965-022-02914-w · Cited by 11
Tsurumi, T., & Fuse, M. (2014) · Journal of Hard Tissue Biology · doi:10.2485/jhtb.23.15 · Cited by 11
Xu, M., Sun, W., Li, C., Li, J., Tan, J., & Zhu, X. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141428 · Cited by 10
Hernández, B. R., & Lieske, A. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300309 · Cited by 10
Properties of poly(lactic acid) plasticized by epoxidized rubber seed oil
Thủy, N. T., Duc, V. M., & Liem, N. T. (2018) · Vietnam Journal of Chemistry · doi:10.1002/vjch.201800010 · Cited by 10
Polylactic Acid ( PLA ) and Its Composites: An Eco‐friendly Solution for Packaging
Sharma, S. (2021) · Wiley eBooks · doi:10.1002/9783527820078.ch4 · Cited by 14
Properties and Food Packaging Application of Poly‐(Lactic) Acid
Sari, N. H., Suteja, S., Sapuan, S. M., & Ilyas, R. A. (2021) · Wiley eBooks · doi:10.1002/9781119381228.ch14 · Cited by 14
Nofar, M., Perego, G., & Cella, G. D. (2022) · Wiley eBooks · doi:10.1002/9781119767480.ch10 · Cited by 12
Cui, L., Zhang, R., Wang, Y., Zhang, C., & Guo, Y. (2017) · Wuhan University Journal of Natural Sciences · doi:10.1007/s11859-017-1267-9 · Cited by 10
Thủy, N. T., & Lan, P. N. (2021) · Advances in Polymer Technology · doi:10.1155/2021/6698918 · Cited by 9
Novel Tough Crystalline Blends of Polylactide with Ethylene Glycol Derivative of POSS
Zubrowska, A., Piórkowska, E., & Bojda, J. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0920-2 · Cited by 11
The combined effect of plasticizers and graphene on properties of poly(lactic acid)
da Silva, J. A., Dalmolin, C., Pachekoski, W. M., & Becker, D. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46745 · Cited by 9
Structural evolution of poly(lactic acid)/poly(ethylene oxide)/unmodified clay upon ambient ageing
Derho, J., Soulestin, J., & Krawczak, P. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40426 · Cited by 8
He, Y., Guo, K., Chen, J. Z., Niu, M. J., Wang, W. J., & Li, X. F. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.335-336.1493 · Cited by 8
Riaz, Z., Khan, A. N., Abbas, S. R., & Hussain, Z. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.05.024 · Cited by 9
Wan, T., Yang, G., Du, T., & Zhang, J. (2014) · Polymer Engineering and Science · doi:10.1002/pen.23886 · Cited by 8
THERMAL-MECHANICAL PROPERTIES AND RHEOLOGICAL BEHAVIORS OF POLYLACTIDE/POLY(ETHYLENE OXIDE) BLENDS
Jia, Z., Han, C., Dong, L., & Yang, Y. (2009) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2009.00967 · Cited by 8
Hollow polylactide microcapsules with controlled morphology and thermal and mechanical properties
Sawalha, H., Schroën, K. G. P. H., & Boom, R. M. (2009) · AIChE Journal · doi:10.1002/aic.11895 · Cited by 8
Miscibility and flexibility of poly(lactic acid) blends with octadecenylsuccinic anhydride
Don, T., Li, T.-S., & Lai, W. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.01.035 · Cited by 8
Effect of Nanocalcium Carbonate Content on the Properties of PLA Nanocomposites
Pundir, A., Krishnan, P. S. G., & Nayak, S. K. (2017) · Journal of Composites and Biodegradable Polymers · doi:10.12974/2311-8717.2017.05.01.4 · Cited by 10
Transparent, thermoplastic, aliphatic polyesters through crystallization under molecular confinement
Matloubi, M., Sarem, M., Heck, B., Reiter, G., & Shastri, V. P. (2023) · Matter · doi:10.1016/j.matt.2023.05.021 · Cited by 7
Menossi, M., Salcedo, M. F., Mansilla, A. Y., Álvarez, V. A., & Ludueña, L. N. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.56933 · Cited by 7
Research hot spots and development trends of biodegradable plastics
Wang, N., Qian, D., Wang, X., Li, Y., Zheng, T., & Wang, Q. (2024) · Process Biochemistry · doi:10.1016/j.procbio.2024.12.018 · Cited by 7
Liu, Y., Liu, G., Li, M., & He, C. (2017) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2017.1336726 · Cited by 7
Wu, N., Wang, H., Ding, M., Man, L., & Zhang, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37989 · Cited by 7
Babaniyi, B. R., Afolabi, F. J., & Obagunwa, M. P. (2020) · Composites Part C Open Access · doi:10.1016/j.jcomc.2020.100021 · Cited by 7
Tan, D. K., Munzenrieder, N. S., Maniruzzaman, M., & Nokhodchi, A. (2020) · Current Drug Delivery · doi:10.2174/1567201817999201103195456 · Cited by 7
Kaveh, M., Yeganehzad, S., Hesarinejad, M. A., Kiumarsi, M., & Moghaddam, M. R. A. (2024) · Polymers · doi:10.3390/polym16111469 · Cited by 7
Synthesis and Characterisation of PLA-CO-PEG Copolymers
Thanomsilp, C., & Phetthianchai, U. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.506.178 · Cited by 6
Hao, Y., Yang, H., Zhang, H., Gao, G., & Dong, L. (2015) · Fibers and Polymers · doi:10.1007/s12221-015-5478-4 · Cited by 8
Effect of Processing Method on Thermal Behavior in PLA/PEG Melt Blending
Hashim, N., Retenam, K., Somderam, S., & Yusoh, K. (2015) · Advanced materials research · doi:10.4028/www.scientific.net/amr.1134.185 · Cited by 8
Li, Y., Fang, H., Zhang, D., Bahader, A., Zhen, B., Xu, P. Y., & Ding, Y. (2016) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-016-5481-z · Cited by 6
Living in the Plastic Age: Perspectives from Humanities, Social Sciences and Environmental Sciences
Kramm, J., Völker, C., & Verlag, C. (2023) · Campus Verlag eBooks · doi:10.12907/978-3-593-44902-9 · Cited by 16
Teng, C., Xu, H. Y., Yang, K., & Yu, M. (2006) · Journal of Macromolecular Science Part A · doi:10.1080/10601320600941276 · Cited by 6
Influence of Biodegradable Poly(butylene carbonate) on Plasticized Polylactide Blown Films
Lang, X., Zhao, Y., Pan, H., Yang, H., Zhang, H., Zhang, G., Dong, L., & Hao, Y. (2016) · Advances in Polymer Technology · doi:10.1002/adv.21692 · Cited by 5
Petaloti, A.-I., Paraskevopoulou, A., & Achilias, D. S. (2025) · Molecules · doi:10.3390/molecules30061383 · Cited by 5
Increased Elongation at Breaking Point with Improved Mechanical Characteristics in PLA
Atnurkar, V., Schuster, J., & Shaik, Y. P. (2023) · Open Journal of Composite Materials · doi:10.4236/ojcm.2023.132002 · Cited by 6
Ρόκα, Ν., Papazoglou, T.-P., & Pitsikalis, M. (2024) · Polymers · doi:10.3390/polym16172447 · Cited by 4
Dao, Y. H., Phương, H. T., Chiến, N. V., Phuong, D. H., & Nguyen, T. T. (2024) · Vietnam Journal of Chemistry · doi:10.1002/vjch.202300292 · Cited by 4
Bruyne, A. D., Cerdán-Gómez, K., O’Rourke, G., Denayer, M., Vekeman, J., Proft, F. D., Stuyck, W., Leinders, J., Puyvelde, P. V., & Vos, D. E. D. (2024) · Journal of Polymers and the Environment · doi:10.1007/s10924-024-03254-0 · Cited by 5
Study to improve the properties of polylactic acid by epoxidized crude rubber seed oil
Thủy, N. T., Nam, B. X., & Duc, V. M. (2019) · Vietnam Journal of Chemistry · doi:10.1002/vjch.2019000111 · Cited by 4
Effect of Alkaline Treatment on the Bioactivity of Poly(lactic acid)(PLA)Films in Vitro
Fusé, M., Kuwada-Kusunose, T., & Ogura, A. (2024) · International Journal of Oral-Medical Sciences · doi:10.5466/ijoms.23.18 · Cited by 3
Cui, L., Wang, Z., & Zhu, P. (2012) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2012.720178 · Cited by 3
A slow shape‐recovery polymer based on polylactic acid
Okamoto, H., Katagiri, Y., Nakano, M., & Usuki, A. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41004 · Cited by 3
Arjmandi, R., Hassan, A., Haafiz, M. K. M., & Zakaria, Z. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100656-6.00007-8 · Cited by 3
Hong, J.-H., Haam, S., Lim, G., & Ryu, J.-H. (2019) · Macromolecular Research · doi:10.1007/s13233-020-8041-0 · Cited by 3
Sustainable Biopolymer Composites From Perlite, Plasticized and Unplasticized Poly(Lactic Acid)
Toprakçı, H. A. K., Savcı, D. Y., & Toprakçı, O. (2024) · International Journal of Environment and Geoinformatics · doi:10.30897/ijegeo.1467716 · Cited by 2
Tan, L. T., Holthoff, W. G., Steves, J. M., & Bright, F. V. (2010) · Applied Spectroscopy · doi:10.1366/000370210791114266 · Cited by 2
Ross, S., Mahasaranon, S., & Ross, G. M. (2015) · Macromolecular Symposia · doi:10.1002/masy.201400112 · Cited by 2
Structures and Properties of Biodegradable Composites Based on Synthetic and Natural Polymers
Rogovina, S. Z., Aleksanyan, K. V., & Berlin, A. A. (2016) · Fibre Chemistry · doi:10.1007/s10692-016-9766-6 · Cited by 2
Srinivas, V. (2020) · Research Publications (Maastricht University) · doi:10.26481/dis.20201013vs · Cited by 2
Material-process-structure-property Relationships in Stereocomplex-Reinforced Poly(lactide)
Tuccitto, A. V., & Lee, P. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00056-9 · Cited by 3
Farhoush, M. M., & Garmabi, H. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70582 · Cited by 1
Phase Organization and Circularity in PLLA/Vitrimer Semi-interpenetrating Polymer Networks
Gamberini, L., Giudice, A. D., Papadopoulos, L., Righetti, M. C., Hakkarainen, M., Galantini, L., Liguori, A., & Focarete, M. L. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00678 · Cited by 1
Metadata
- Authors
- Ljungberg, N., & Wesslén, B.
- Affiliations
- Lund University (SE)
- Corresponding author
- Ljungberg, Nadia
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-04-08
- Volume
- 6
- Issue
- 3
- Pages
- 1789-1796
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2007200637
- Cited by
- 331
- References
- 42
- Citations by year
- 2026: 9 · 2025: 5 · 2024: 22 · 2023: 15 · 2022: 14 · 2021: 13 · 2020: 19 · 2019: 12 · 2018: 19 · 2017: 20 · 2016: 30 · 2015: 21 · 2014: 24 · 2013: 25 · 2012: 16
- FWCI
- 2.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Lund University Publications (Lund University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
- Keywords
- polylactic acid, plasticized films, plasticizers, tributyl citrate, oligoesters, glass transition temperature depression, cold crystallization, plasticizer migration, polymer blends, blend compatibility, aging materials, flexibility, crystallinity
- MeSH terms
- Plasticizers, Polyesters, Polymers, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.