New Nanocomposite Materials Reinforced with Cellulose Whiskers in Atactic Polypropylene: Effect of Surface and Dispersion Characteristics
The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Abstract
New nanocomposite films were prepared with atactic polypropylene as the matrix and either of three types of cellulose whiskers, with various surface and dispersion characteristics, as the reinforcing phase: aggregated without surface modification, aggregated and grafted with maleated polypropylene or individualized and finely dispersed with a surfactant. Films obtained by solvent casting from toluene were investigated by means of scanning electron microscopy, dynamic mechanical analysis, and tensile testing. In the linear region, the mechanical properties above the glass-rubber transition were found to be drastically enhanced for the nanocomposites as compared to the neat polypropylene matrix. These effects were ascribed to the formation of a rigid network with filler/filler interactions. In addition, interactions between the filler and the matrix as well as the dispersion quality were found to play a major role on the mechanical properties of the composites when investigation of the films was performed in the nonlinear region.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Nanocomposites with a high level of dispersion were obtained due to the use of the surfactant.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [117]
In the citing paper
“It was observed that the mechanical behavior in the non-linear range was increased, especially the tensile strength of the nanocomposites compared to the neat matrix.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [117]
In the citing paper
“Moreover, elongation at break remained unchanged.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [117]
In the citing paper
“However, the presence of whiskers tends to decrease the elongation at break of the nanocomposites compared to the neat matrix [36,117].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [117]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Preparation and Mechanical Properties of Polypropylene−Clay Hybrids
Kawasumi, M., Hasegawa, N., Kato, M., Usuki, A., & Okada, A. (1997) · Macromolecules · doi:10.1021/ma961786h · Cited by 1,386
Helicoidal self-ordering of cellulose microfibrils in aqueous suspension
Revol, J.-F., Bradford, H., Giasson, J., Marchessault, R. H., & Gray, D. G. (1992) · International Journal of Biological Macromolecules · doi:10.1016/s0141-8130(05)80008-x · Cited by 1,250
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
The nature of adhesion in composites of modified cellulose fibers and polypropylene
Felix, J. M., & Gatenholm, P. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070420307 · Cited by 773
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
Nanocomposite materials from latex and cellulose whiskers
Favier, V., Canova, G. R., Cavaillé, J. Y., Chanzy, H., Dufresne, A., & Gauthier, C. (1995) · Polymers for Advanced Technologies · doi:10.1002/pat.1995.220060514 · Cited by 561
Self-citationHelbert, W., Cavaillé, J. Y., & Dufresne, A. (1996) · Polymer Composites · doi:10.1002/pc.10650 · Cited by 473
Heux, L., Chauve, G., & Bonini, C. (2000) · Langmuir · doi:10.1021/la9913957 · Cited by 467
Self-citationStable suspensions of partially silylated cellulose whiskers dispersed in organic solvents
Goussé, C., Chanzy, H., Excoffier, G., Soubeyrand, L., & Fleury, E. (2002) · Polymer · doi:10.1016/s0032-3861(02)00051-4 · Cited by 446
Research works printed but not linked: 4
- Halpin J. C., 1972, J. Appl. Polym. Sci., 43, 2235
- Ouali N., 1991, Plast. Rubber. Compos. Proc. Appl., 16, 55
- Takayanagi M., 1964, Polym. Sci. Polym. Symp.
- Grunert M., 2002, 223rd ACS National Meeting; American Chemical Society: Orlando, FL
Cited by
Items 101–200 of 410
Fortunati, E., Yang, W., Luzi, F., Kenny, J. M., Torre, L., & Puglia, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.04.013 · Cited by 117
Tough nanopaper structures based on cellulose nanofibers and carbon nanotubes
Salajková, M., Valentini, L., Zhou, Q., & Berglund, L. A. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.06.014 · Cited by 109
Acetylated microfibrillated cellulose as a toughening agent in poly(lactic acid)
Bulota, M., Kreitsmann, K., Hughes, M., & Paltakari, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36787 · Cited by 115
Song, L. Y., Huang, J. T., Chang, P. R., Wei, S., Xu, Y., & Zhang, Q. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.023 · Cited by 106
Rosilo, H., Kontturi, E., Seitsonen, J. J. T., Kolehmainen, E. T., & Ikkala, O. T. (2013) · Biomacromolecules · doi:10.1021/bm400185z · Cited by 111
Xu, S. H., Gu, J., Luo, Y., & Jia, D. (2011) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2012.3 · Cited by 102
“Surface modification [19–22] and chemical grafting [23–26] have been used in the modifications of NCC.”
MethodA review on nanocellulose as a lightweight filler of polyolefin composites
Hao, W., Wang, M., Zhou, F., Luo, H., Xie, X. L., Luo, F., & Cha, R. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116466 · Cited by 98
Fatona, A., Berry, R. M., Brook, M. A., & Moran-Mirabal, J. M. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00511 · Cited by 100
Nelson, K., Retsina, T., Iakovlev, M., van Heiningen, A., Deng, Y., Shatkin, J. A., & Mulyadi, A. (2016) · Springer series in materials science · doi:10.1007/978-3-319-23419-9_9 · Cited by 117
Preparation and properties of cellulose nanocrystals reinforced collagen composite films
Li, W., Guo, R., Lan, Y., Zhang, Y., Xue, W., & Zhang, Y. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34792 · Cited by 101
Nanocellulosen: eine neue Familie naturbasierter Materialien
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D. G., & Dorris, A. (2011) · Angewandte Chemie · doi:10.1002/ange.201001273 · Cited by 98
Woehl, M. A., Canestraro, C. D., Mikowski, A., Sierakowski, M. R., Ramos, L. P., & Wypych, F. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.12.045 · Cited by 102
Mabrouk, A. B., Thielemans, W., Dufresne, A., & Boufi, S. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30886 · Cited by 98
Novel nanocellulosic xylan composite film
Saxena, A., Elder, T., Pan, S., & Ragauskas, A. J. (2009) · Composites Part B Engineering · doi:10.1016/j.compositesb.2009.05.003 · Cited by 97
Designing cellulose nanofiber surface for high density polyethylene reinforcement
Yano, H., Omura, H., Honma, Y., Okumura, H., Sano, H., & Nakatsubo, F. (2018) · Cellulose · doi:10.1007/s10570-018-1787-2 · Cited by 90
“One is to use compatibilizers that bridge CNFs and polymers (Ljungberg et al. 2005; Suzuki et al. 2014; Sakakibara et al. 2016).”
MethodInfluence of cellulose nanowhiskers on the hydrolytic degradation behavior of poly(d,l-lactide)
de Paula, E. L., Mano, V., & Pereira, F. V. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.06.006 · Cited by 96
A review of cellulose nanocrystals and nanocomposites
Ramires, E. C., & Dufresne, A. (2011) · TAPPI Journal · doi:10.32964/tj10.4.9 · Cited by 96
Pea starch‐based composite films with pea hull fibers and pea hull fiber‐derived nanowhiskers
Chen, Y., Liu, C., Chang, P. R., Anderson, D. P., & Huneault, M. A. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21290 · Cited by 93
Surface modification of cellulose nanofibrils for poly(lactic acid) composite application
Qu, P., Zhou, Y., Zhang, X., Yao, S., & Zhang, L. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36360 · Cited by 93
Preparation and characterization of a Lithium-ion battery separator from cellulose nanofibers
Zhang, H., Wang, X., & Liang, Y. (2015) · Heliyon · doi:10.1016/j.heliyon.2015.e00032 · Cited by 88
“All these properties predict that cellulose nanofibers could be used in many applications in a diverse range of fields, including reinforcement agent in polymeric matrix [11] [12], thickening agent [13], optical transparent membrane [14] [15].”
BackgroundZhang, T., Cheng, Q., Ye, D., & Chang, C. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.04.007 · Cited by 88
REVIEW on MODIFICATION of NANOCELLULOSE for APPLICATION in COMPOSITES
Islam, M. T., Alam, M. M., & Zoccola, M. (2013) · International Journal of Innovative Research in Science Engineering and Technology · Cited by 134
Peng, Y., Gallegos, S. A., Gardner, D. J., Han, Y., & Cai, Z. (2014) · Polymer Composites · doi:10.1002/pc.23235 · Cited by 85
Cellulose Nanocomposite Biopolymer Foam—Hierarchical Structure Effects on Energy Absorption
Svagan, A. J., Berglund, L. A., & Jensen, P. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200183u · Cited by 90
Sanhawong, W., Banhalee, P., Boonsang, S., & Kaewpirom, S. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.07.046 · Cited by 82
Lü, Y., Cueva, M. C., Lara‐Curzio, E., & Ozcan, S. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.05.047 · Cited by 80
“, 2009; Sassi & Chanzy, 1995; Sebe, Ham-Pichavant, & Pecastaings, 2013), and polymer grafting (Cao et al., 2009; Lin & Dufresne, 2013; Ljungberg et al., 2005; Lonnberg et al., 2011).”
dos Santos, F. A., Iulianelli, G. C. V., & Tavares, M. I. B. (2016) · Materials Sciences and Applications · doi:10.4236/msa.2016.75026 · Cited by 113
“The addition of surfactants may also improve the compatibility between hydrophobic matrices and cellulose [42] [278]-[280].”
BackgroundSanna, R., Fortunati, E., Alzari, V., Nuvoli, D., Terenzi, A., Casula, M. F., Kenny, J. M., & Mariani, A. (2013) · Cellulose · doi:10.1007/s10570-013-9988-1 · Cited by 80
“…(Cao et al. 2007), poly(vinyl alcohol) (Cho and Park 2011), poly(e-caprolactone) (Goffin et al. 2011), poly(styrene-co-hexyl acrylate) (Mabrouk et al. 2011), poly(vinyl chloride) (Chazeau et al. 1999), polypropylene (Ljungberg et al. 2005) and waterborne epoxies (Matos Ruiz et al. 2001).”
BackgroundInvestigation into nanocellulosics versus acacia reinforced acrylic films
Pu, Y., Zhang, J., Elder, T., Deng, Y., Gatenholm, P., & Ragauskas, A. J. (2006) · Composites Part B Engineering · doi:10.1016/j.compositesb.2006.07.008 · Cited by 92
“Following this discovery several other synthetic and natural polymers including poly(vinylchloride) [12–14], polypropylene [15],”
Khan, Z. U., Kausar, A., & Ullah, H. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098693 · Cited by 79
“Two-dimensional nanofillers are elongated structures, for example, CNTs and celluloset whiskers([16]) or plate-like materials such as nanoclays.”
BackgroundNanocellulose as analyte and analytical tool: Opportunities and challenges
Ruiz-Palomero, C., Soriano, M. L., & Valcárcel, M. (2016) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2016.11.007 · Cited by 78
Nanocellulose-Based Composites
Spence, K. L., Habibi, Y., & Dufresne, A. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_7 · Cited by 86
Floros, M. C., Hojabri, L., Abraham, E., Jose, J., Thomas, S., Pothan, L. A., Leão, A. L., & Narine, S. S. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.02.016 · Cited by 79
Hu, D., Cui, Y., Mo, K., Wang, J., Huang, Y., Miao, X., Lin, J., & Chang, C. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108118 · Cited by 77
Bagheriasl, D., Carreau, P. J., Dubois, C., & Riedl, B. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.07.012 · Cited by 85
Geng, S., Haque, M. M., & Oksman, K. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.02.013 · Cited by 77
Sakakibara, K., Yano, H., & Tsujii, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07769 · Cited by 72
Younas, M., Noreen, A., Sharif, A., Majeed, A., Hassan, A., Tabasum, S., Mohammadi, A., & Zia, K. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.064 · Cited by 74
Liu, Y., Hu, Q., Dong, W., Liu, S., Zhang, H., & Gu, Y. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202100413 · Cited by 72
Sakakibara, K., Moriki, Y., Yano, H., & Tsujii, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13963 · Cited by 75
Kumar, R., Rai, B., Gahlyan, S., & Kumar, G. (2020) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2021.11 · Cited by 72
“The functionalized nanocellulose is mainly employed for waste-water treatment, biosensors as well as bioimaging, catalysis, and biomedical application, etc. [81].”
Enzymatic engineering of nanometric cellulose for sustainable polypropylene nanocomposites
Zielińska, D., Rydzkowski, T., Thakur, V. K., & Borysiak, S. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.113188 · Cited by 73
Microfibrillated cellulose/cellulose acetate composites: Effect of surface treatment
Lu, J., & Drzal, L. T. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21875 · Cited by 75
Novel anisotropic materials from functionalised colloidal cellulose and cellulose derivatives
Holt, B. L., Stoyanov, S. D., Pelan, E. G., & Paunov, V. N. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01022g · Cited by 76
Fujisawa, S., Saito, T., Kimura, S., Iwata, T., & Isogai, A. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.10.021 · Cited by 72
Cellulose nanofiber-reinforced polycaprolactone/polypropylene hybrid nanocomposite
Lee, S. H., Teramoto, Y., & Endo, T. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.10.014 · Cited by 73
Ansari, F., Salajková, M., Zhou, Q., & Berglund, L. A. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b01245 · Cited by 72
Feng, L., Zhou, Z., Dufresne, A., Huang, J., Wei, M., & An, L. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29731 · Cited by 76
Hydrophobisation of lignocellulosic materials part I: physical modification
Rodríguez‐Fabià, S., Torstensen, J. Ø., Johansson, L., & Syverud, K. (2022) · Cellulose · doi:10.1007/s10570-022-04620-8 · Cited by 69
Surface modification of cellulose nanocrystals by grafting with poly(lactic acid)
Peltzer, M. A., Pei, A., Zhou, Q., Berglund, L. A., & Jiménez, A. (2013) · Polymer International · doi:10.1002/pi.4610 · Cited by 68
Anžlovar, A., Huskić, M., & Žagar, E. (2015) · Cellulose · doi:10.1007/s10570-015-0786-9 · Cited by 63
Paukszta, D., & Borysiak, S. (2013) · Materials · doi:10.3390/ma6072747 · Cited by 68
“In order to improve the intermolecular interactions, prevent CN aggregation, and improve dispersion of the nanofiller, modification of the cellulose surface has been carried out [59–63].”
BackgroundProduction, Processes and Modification of Nanocrystalline Cellulose from Agro-Waste: A Review
Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Atikah, M. S. N., Atiqah, A., Ansari, M. N. M., & Norrrahim, M. N. F. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.87001 · Cited by 66
The use of biobased nanofibres in composites
Bandyopadhyay‐Ghosh, S., Ghosh, S. B., & Sain, M. M. (2014) · Elsevier eBooks · doi:10.1533/9781782421276.5.571 · Cited by 76
Chen, W. J., Gu, J., & Xu, S. H. (2014) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2014.69 · Cited by 61
“For apolar matrix, modification of cellulose/matrix interaction would do a great favor to the properties [9, 16].”
Leguy, J., Diallo, A., Putaux, J., Nishiyama, Y., Heux, L., & Jean, B. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b02202 · Cited by 63
Self-citationNanocellulose-Based Polymeric Blends for Food Packaging Applications
Arrieta, M. P., Fortunati, E., Burgos, N., Peltzer, M. A., López, J., & Peponi, L. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-44248-0.00007-9 · Cited by 69
Polyethylene cellulose nanofibrils nanocomposites
Maia, T. H. S., Larocca, N. M., Beatrice, C. A. G., de Menezes, A. J., Siqueira, G. D. F., Pessan, L. A., Dufresne, A., França, M. P., & Lucas, A. D. A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.05.089 · Cited by 60
Effect of particle Alignment on mechanical properties of neat cellulose nanocrystal films
Reising, A. B., Moon, R. J., & Youngblood, J. P. (2012) · Cited by 110
Geng, S., Wei, J., Aitomäki, Y., Noël, M., & Oksman, K. (2018) · Nanoscale · doi:10.1039/c7nr09080c · Cited by 63
Ahmad, E. E. M., & Luyt, A. S. (2012) · Polymer Composites · doi:10.1002/pc.22236 · Cited by 62
Polymer Nanocomposites with Cellulose Nanocrystals Featuring Adaptive Surface Groups
Natterodt, J. C., Sapkota, J., Foster, E. J., & Weder, C. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01639 · Cited by 59
Mabrouk, A. B., Vilar, M. R., Magnin, A., Belgacem, M. N., & Boufi, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.07.050 · Cited by 60
Volk, N., He, R., & Magniez, K. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.09.025 · Cited by 60
Reinforcement Efficiency of Carbon Nanotubes – Myth and Reality
Loos, M. R., & Manas‐Zloczower, I. (2011) · Macromolecular Theory and Simulations · doi:10.1002/mats.201100099 · Cited by 56
Synthesis and conservation of cellulose nanocrystals
Giorgio, L. D., Martín, L., Salgado, P. R., & Mauri, A. N. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116187 · Cited by 55
Chi, K., & Catchmark, J. M. (2017) · Cellulose · doi:10.1007/s10570-017-1479-3 · Cited by 56
“(2000) presented the first report on surface modification of CNC using an anionic surfactant (an acid phosphate ester of ethoxylated nonylphenol) and the modified CNC was found to largely enhance the mechanical performance of atactic propylene matrix (Ljungberg et al. 2005).”
BackgroundInfluentialCellulose NANOFIBER‐polyethylene nanocomposites modified by polyvinyl alcohol
Kızıltaş, A., Nazari, B., Kiziltas, E. E., Gardner, D. J., Han, Y., & Rushing, T. S. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42933 · Cited by 50
Poly(lactic acid)-based biocomposites reinforced with modified cellulose nanocrystals
Yin, Y., Zhao, L.-N., Jiang, X., Wang, H., & Gao, W. (2017) · Cellulose · doi:10.1007/s10570-017-1455-y · Cited by 50
“2013, 2014a, b), polymer grafting (Ljungberg et al. 2005; Roy et al. 2005; Morandi et al. 2009; Goffin et al. 2012), etc.”
BackgroundCellulose nanocrystals suspensions: Liquid crystal anisotropy, rheology and films iridescence
Casado, U., Mucci, V., & Aranguren, M. I. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117848 · Cited by 50
Emami, Z., Meng, Q., Pircheraghi, G., & Manas‐Zloczower, I. (2015) · Cellulose · doi:10.1007/s10570-015-0728-6 · Cited by 50
“Ljungberg et al. (2005) used surfactant treated cellulose whiskers in a polypropylene matrix and obtained improved filler dispersion due to weakening the interactions between whiskers.”
MethodHuang, F. Y., Wu, X., Yu, Y., Lu, Y., & Chen, Q. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.09.010 · Cited by 49
A review of nanocellulose in the drug-delivery system
Tan, T. H., Lee, H. V., Yehye, W. A., & Hamid, S. B. O. A. A. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816913-1.00005-2 · Cited by 59
Nanocellulose in polymer composites and biomedical applications
Lü, Y., Tekinalp, H., Eberle, C. C., Peter, W. H., Naskar, A. K., & Ozcan, S. (2014) · TAPPI Journal · doi:10.32964/tj13.6.47 · Cited by 54
Espino-Pérez, E., Gilbert, R. G., Domenek, S., Brochier-Salon, M.-C., Belgacem, M. N., & Bras, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.005 · Cited by 49
The Surface and In-Depth Modification of Cellulose Fibers
Gandini, A., & Belgacem, M. N. (2015) · Advances in polymer science · doi:10.1007/12_2015_305 · Cited by 51
Yang, D. J., Peng, X., Zhong, L., Cao, X., Chen, W., Wang, S., Liu, C., & Sun, R. (2015) · RSC Advances · doi:10.1039/c4ra10748a · Cited by 48
Savadekar, N. R., Karande, V. S., Vigneshwaran, N., Kadam, P., & Mhaske, S. T. (2014) · Applied Nanoscience · doi:10.1007/s13204-014-0316-3 · Cited by 48
“…(PLA) (Huang et al. 2006), or poly(vinyl alcohol) (PVA) (Zhang et al. 2007) and non-biodegradable polymeric matrices such as polypropylene (Ljungberg et al. 2005), poly(vinyl chloride) (Chazeau et al. 2000), poly(oxyethylene) (Azizi Samir et al. 2005) and epoxy resin (Shimazaki et al.…”
Individually Dispersed Wood-Based Cellulose Nanocrystals
Chang, H., Luo, J., Davijani, A. A. B., Chien, A., Wang, P., Liu, H. C., & Kumar, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00094 · Cited by 50
Natural Biopolymer-Based Nanocomposite Films for Packaging Applications
Rouf, T. B., & Kokini, J. L. (2017) · Springer eBooks · doi:10.1007/978-3-319-67319-6_8 · Cited by 57
Low, L. E., Tey, B. T., Ong, B. H., Chan, E., & Tang, S. Y. (2016) · RSC Advances · doi:10.1039/c6ra16109j · Cited by 47
Cellulosic Nanocomposites from Natural Fibers for Medical Applications: A Review
Khalil, H. P. S. A., Bhat, A. H., Bakar, A. A., Tahir, P. M., Zaidul, I. S. M., & Jawaid, M. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_72 · Cited by 53
“three-dimensional components with a high forming degree [155].”
BackgroundMacro- and nanodimensional plant fiber reinforcements for cementitious composites
Parveen, S., Rana, S., & Fangueiro, R. M. E. S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-102001-2.00020-6 · Cited by 50
Investigation of polyethylene/sisal whiskers nanocomposites prepared under different conditions
Mokhena, T. C., & Luyt, A. S. (2014) · Polymer Composites · doi:10.1002/pc.22887 · Cited by 45
Micromechanical models for carbon nanotube and cellulose nanowhisker reinforced composites
Loos, M. R., & Manas‐Zloczower, I. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23313 · Cited by 45
Nano-dispersion of TEMPO-oxidized cellulose/aliphatic amine salts in isopropyl alcohol
Fujisawa, S., Saito, T., & Isogai, A. (2012) · Cellulose · doi:10.1007/s10570-011-9648-2 · Cited by 52
“These dispersions are possible to be used for preparation of cellulose nanowhiskerreinforced composite materials (Ljungberg et al. 2005, 2006).”
BackgroundRe, G. L., Engström, J., Wu, Q., Malmström, E., Gedde, U. W., Olsson, R. T., & Berglund, L. A. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00376 · Cited by 45
Tarani, E., Chrysafi, I., Kállay-Menyhárd, A., Pavlidou, E., Kehagias, T., Bikiaris, D. Ν., Vourlias, G., & Chrissafis, K. (2020) · Polymers · doi:10.3390/polym12081719 · Cited by 44
Preparation and Properties of Microcrystalline Cellulose/Fish Gelatin Composite Film
Pan, L., Li, P., & Tao, Y. (2020) · Materials · doi:10.3390/ma13194370 · Cited by 44
Ho, Y., Halim, A. F. M. F., & Islam, M. T. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.795341 · Cited by 47
“This subject, as well as the use of nanocellulose in composite materials, has been extensively researched (Azizi Samir et al., 2005; Ljungberg et al., 2005).”
BackgroundHebeish, A., Farag, S., Sharaf, S. S., & Shaheen, T. I. (2014) · Cellulose · doi:10.1007/s10570-014-0317-0 · Cited by 43
“…issue in the preparation of metal nanoparticles by the chemical reduction method is to understand the reducing as well as stabilizing role of the materials used to convert the metal ions to metal nanoparticles and prevent the latter from agglomeration and aggregation (Mochochoko et al. 2013).”
MethodLiu, X., Qi, X., Guan, Y., He, Y., Li, S., Liu, H., Zhou, L., Wei, C. Y., Yu, C., & Chen, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115202 · Cited by 43
Cellulose Dissolution in Ionic Liquid under Mild Conditions: Effect of Hydrolysis and Temperature
Acharya, S., Hu, Y., & Abidi, N. (2021) · Fibers · doi:10.3390/fib9010005 · Cited by 45
“It is well known that HC, such as CNCs, has a strong tendency to self-assemble and strongly agglomerate after drying [35].”
BackgroundSanches, A. O., Ricco, L. S., Malmonge, L. F., da Silva, M. J., Sakamoto, W. K., & Malmonge, J. A. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.08.013 · Cited by 42
Surface Modification of Nanocellulose
Daud, J. B., & Lee, K. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch3 · Cited by 45
Surface modification of cellulose nanowhisker throughout graft polymerization of 2-ethyl-2-oxazoline
Tehrani, A. D., & Neysi, E. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.04.082 · Cited by 42
Mechanical and morphological properties of cellulose nanocrystal‐polypropylene composites
Sojoudiasli, H., Heuzey, M., & Carreau, P. J. (2017) · Polymer Composites · doi:10.1002/pc.24383 · Cited by 44
Zhou, J., Ma, X., Li, J., & Zhu, L. (2018) · Cellulose · doi:10.1007/s10570-018-2136-1 · Cited by 43
“2006), polypropylene (Ljungberg et al. 2005), poly(styrene-co-butyl acrylate) latex (Helbert et al.”
Char-forming behavior of nanofibrillated cellulose treated with glycidyl phenyl POSS
Fox, D. M., Lee, J., Zammarano, M., Katsoulis, D. E., Eldred, D. V., Haverhals, L. M., Trulove, P. C., Long, H. C. D., & Gilman, J. W. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.01.015 · Cited by 41
“The addition of cellulose leads to improved tensile and Young’s modulus properties, but suffers from decreased fracture toughness and can lead to reduced crystallinity (Ljungberg et al., 2005; Jonoobi, Harun, Matthew, & Oksman, 2010).”
BackgroundCellulose Nanocrystals: A Potential Nanofiller for Food Packaging Applications
Dhar, P., Bhardwaj, U., Kumar, A., & Katiyar, V. (2014) · ACS symposium series · doi:10.1021/bk-2014-1162.ch017 · Cited by 46
Metadata
- Authors
- Ljungberg, N., Bonini, C., Bortolussi, F., Boisson, C., Heux, L., & Cavaillé
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Centre de Recherches sur les Macromolécules Végétales (CERMAV-CNRS), Université Joseph Fourier, BP 53, 38041 Grenoble, France, Laboratoire de Chimie et Procédés de Polymérisation, CNRS/CPE, 69621Villeurbanne, France, and Groupe d'Etudes de Métallurgie Physique et de Physique des Matériaux, UMR CNRS 5510, INSA, 69621 Villeurbanne, France
- Corresponding author
- Heux, L.
- ORCID
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-07-06
- Volume
- 6
- Issue
- 5
- Pages
- 2732-2739
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2048583074
- Cited by
- 395
- References
- 29
- Citations by year
- 2026: 5 · 2025: 3 · 2024: 6 · 2023: 13 · 2022: 10 · 2021: 9 · 2020: 17 · 2019: 22 · 2018: 23 · 2017: 39 · 2016: 32 · 2015: 30 · 2014: 36 · 2013: 34 · 2012: 28
- FWCI
- 4.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose whiskers, atactic polypropylene, polymer nanocomposites, surfactant dispersion, filler-matrix interaction, mechanical properties, glass transition, nanocomposite films, solvent casting
- MeSH terms
- Biocompatible Materials, Cellulose, Composite Resins, Glass, Materials Testing, Microscopy, Electron, Scanning, Molecular Weight, Polypropylenes, Rubber, Surface Properties, Surface-Active Agents, Temperature, Tensile Strength, Toluene, Nanotechnology, Macromolecular Substances
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.