New Nanocomposite Materials Reinforced with Cellulose Whiskers in Atactic Polypropylene: Effect of Surface and Dispersion Characteristics
The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Abstract
New nanocomposite films were prepared with atactic polypropylene as the matrix and either of three types of cellulose whiskers, with various surface and dispersion characteristics, as the reinforcing phase: aggregated without surface modification, aggregated and grafted with maleated polypropylene or individualized and finely dispersed with a surfactant. Films obtained by solvent casting from toluene were investigated by means of scanning electron microscopy, dynamic mechanical analysis, and tensile testing. In the linear region, the mechanical properties above the glass-rubber transition were found to be drastically enhanced for the nanocomposites as compared to the neat polypropylene matrix. These effects were ascribed to the formation of a rigid network with filler/filler interactions. In addition, interactions between the filler and the matrix as well as the dispersion quality were found to play a major role on the mechanical properties of the composites when investigation of the films was performed in the nonlinear region.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Nanocomposites with a high level of dispersion were obtained due to the use of the surfactant.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [117]
In the citing paper
“It was observed that the mechanical behavior in the non-linear range was increased, especially the tensile strength of the nanocomposites compared to the neat matrix.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [117]
In the citing paper
“Moreover, elongation at break remained unchanged.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [117]
In the citing paper
“However, the presence of whiskers tends to decrease the elongation at break of the nanocomposites compared to the neat matrix [36,117].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [117]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Preparation and Mechanical Properties of Polypropylene−Clay Hybrids
Kawasumi, M., Hasegawa, N., Kato, M., Usuki, A., & Okada, A. (1997) · Macromolecules · doi:10.1021/ma961786h · Cited by 1,386
Helicoidal self-ordering of cellulose microfibrils in aqueous suspension
Revol, J.-F., Bradford, H., Giasson, J., Marchessault, R. H., & Gray, D. G. (1992) · International Journal of Biological Macromolecules · doi:10.1016/s0141-8130(05)80008-x · Cited by 1,250
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
The nature of adhesion in composites of modified cellulose fibers and polypropylene
Felix, J. M., & Gatenholm, P. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070420307 · Cited by 773
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
Nanocomposite materials from latex and cellulose whiskers
Favier, V., Canova, G. R., Cavaillé, J. Y., Chanzy, H., Dufresne, A., & Gauthier, C. (1995) · Polymers for Advanced Technologies · doi:10.1002/pat.1995.220060514 · Cited by 561
Self-citationHelbert, W., Cavaillé, J. Y., & Dufresne, A. (1996) · Polymer Composites · doi:10.1002/pc.10650 · Cited by 473
Heux, L., Chauve, G., & Bonini, C. (2000) · Langmuir · doi:10.1021/la9913957 · Cited by 467
Self-citationStable suspensions of partially silylated cellulose whiskers dispersed in organic solvents
Goussé, C., Chanzy, H., Excoffier, G., Soubeyrand, L., & Fleury, E. (2002) · Polymer · doi:10.1016/s0032-3861(02)00051-4 · Cited by 446
Research works printed but not linked: 4
- Halpin J. C., 1972, J. Appl. Polym. Sci., 43, 2235
- Ouali N., 1991, Plast. Rubber. Compos. Proc. Appl., 16, 55
- Takayanagi M., 1964, Polym. Sci. Polym. Symp.
- Grunert M., 2002, 223rd ACS National Meeting; American Chemical Society: Orlando, FL
Cited by
Items 201–300 of 410
Surface modification and antimicrobial properties of cellulose nanocrystals
Bespalova, Y. A., Kwon, D. H., & Vasanthan, N. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44789 · Cited by 41
Roumeli, E., Pavlidou, E., Bikiaris, D. Ν., & Chrissafis, K. (2013) · Carbon · doi:10.1016/j.carbon.2013.10.020 · Cited by 41
“In some studies where the formed filler percolating network has been found to improve the composite’s mechanical properties and the Takayanagi II with the percolation concept have been successfully applied to experimental data, the fillers were found to be linked by strong hydrogen bonds [44].”
BackgroundEffect of Cellulose Nanocrystals from Different Lignocellulosic Residues to Chitosan/Glycerol Films
de Andrade, M. R., Nery, T. B. R., Santana, T. I. D. S. E., Leal, I. L., Rodrigues, L. A. P., Reis, J. H. D. O., Druzian, J. I., & Machado, B. A. S. (2019) · Polymers · doi:10.3390/polym11040658 · Cited by 39
Kaldéus, T., Träger, A., Berglund, L. A., Malmström, E., & Lo Re, G. (2019) · ACS Nano · doi:10.1021/acsnano.8b08257 · Cited by 38
Hassan, M. L., Mathew, A. P., Hassan, E. A., Fadel, S. M., & Oksman, K. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413509292 · Cited by 39
Huang, L., Ye, Z., & Berry, R. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01253 · Cited by 40
Fallon, J. J., Kolb, B. Q., Herwig, C., Foster, E. J., & Bortner, M. J. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46992 · Cited by 40
Werner, A., Sèbe, G., & Héroguez, V. (2018) · Polymer Chemistry · doi:10.1039/c8py01022f · Cited by 37
Toughening mechanisms in poly(lactic) acid reinforced with TEMPO-oxidized cellulose
Bulota, M., & Hughes, M. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6443-x · Cited by 37
Guo, M., Her, S., Keunen, R., Zhang, S., Allen, C. J., & Winnik, M. A. (2016) · ACS Omega · doi:10.1021/acsomega.6b00055 · Cited by 38
Yousefian, H., & Rodrigue, D. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42845 · Cited by 36
Du, P., Ding, Q., Zhao, C., Jiang, Y., Han, W., & Li, X. (2021) · Cellulose · doi:10.1007/s10570-021-03959-8 · Cited by 37
“To solve the above questions, we employed hydroxide groups (OH groups) treatment in advance to neutralize H? groups in the chitosan solution, and then applied MPVA coating (Li and Pan 2012; Ljungberg et al. 2016).”
MethodNanocomposites of LLDPE and Surface-Modified Cellulose Nanocrystals Prepared by Melt Processing
Anžlovar, A., Kunaver, M., Krajnc, A., & Žagar, E. (2018) · Molecules · doi:10.3390/molecules23071782 · Cited by 35
One-Component Nanocomposites Based on Polymer-Grafted Cellulose Nanocrystals
Wohlhauser, S., Kuhnt, T., Meesorn, W., de Espinosa, L. M., Zoppe, J. O., & Weder, C. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b01612 · Cited by 35
Li, S. C.-Y., Sun, Y.-C., Guan, Q., & Naguib, H. E. (2016) · RSC Advances · doi:10.1039/c6ra11623j · Cited by 34
Boujemaoui, A., Ansari, F., & Berglund, L. A. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00701 · Cited by 36
Cellulose nanocrystals modified with quaternary ammonium salts and its reinforcement of polystyrene
Yin, Y., Hong, Z., Tian, X., Zhu, Q., Jiang, X., Wang, H., & Gao, W. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-2131-y · Cited by 35
Surface Chemistry of Nanocellulose
Zhu, G., & Lin, N. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch5 · Cited by 36
Processing of Polymer Nanocomposites Reinforced with Cellulose Nanocrystals: A Challenge
Dufresne, A. (2012) · International Polymer Processing · doi:10.3139/217.2603 · Cited by 36
Wittaya, T. (2009) · Cited by 52
Self-assembly of polysaccharide nanocrystals: from aggregation in suspensions to optical materials
Song, Q., Wang, Z., Xu, D., Liu, S., Liu, H., & Zhang, K. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101768 · Cited by 36
Polypropylene reinforced with nanocrystalline cellulose: Coupling agent optimization
Hassanabadi, H. M., Alemdar, A., & Rodrigue, D. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42438 · Cited by 37
From exfoliation to intercalation—changes in morphology of HNBR/organoclay nanocomposites
Wang, X., Huang, A.-M., Jia, D., & Li, Y. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.06.035 · Cited by 32
Charreau, H., Foresti, M. L., & Vázquez, A. (2012) · Recent Patents on Nanotechnology · doi:10.2174/1872210511307010056 · Cited by 64
“Cellulose nanowhiskers may find application as reinforcing components in different polymer matrices [7-8]; in the synthesis of polymers with liquid crystalline behavior for electronic applications [9]; in the immobilization of enzymes for the preparation of active biocatalysts [10], in medical…”
Suzuki, K., Homma, Y., Igarashi, Y., Okumura, H., Semba, T., Nakatsubo, F., & Yano, H. (2015) · Cellulose · doi:10.1007/s10570-015-0845-2 · Cited by 32
Hassanabadi, H. M., & Rodrigue, D. (2011) · Rheologica Acta · doi:10.1007/s00397-011-0603-9 · Cited by 34
“For example, results of cellulosic nano-composites based on natural rubber (Nair et al. 2003), acetate butyrate (Grunert and Winter 2002), and polypropylene (Ljungberg et al. 2005) showed that nano-composites have lower modulus by reducing cellulose interactions.”
BackgroundKhan, M. R., Wasim, M., Farooq, A., Naeem, M. A., Mushtaq, M., Liu, J., Chen, C., & Wei, Q. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05190-4 · Cited by 31
Changsarn, S., Mendez, J. D., Shanmuganathan, K., Foster, E. J., Weder, C., & Supaphol, P. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201100183 · Cited by 32
Kelley, J., Simonsen, J., & Ding, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37790 · Cited by 31
Bio-based nanocomposites by in situ cure of phenolic prepolymers with cellulose whiskers
Liu, H., & Laborie, M. G. (2011) · Cellulose · doi:10.1007/s10570-011-9499-x · Cited by 31
“It has been noted that surface modification can ‘insulate’ the CNWs and suppress the desirable interactions between them to form a three-dimensional percolating network, or damage the crystalline structure of cellulose, thus mitigating their reinforcing effect (Ljungberg et al. 2005).”
BackgroundExtraction and Production of Cellulose Nanofibers
Vázquez, A., Foresti, M. L., Morán, J., & Cyras, V. P. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_57 · Cited by 37
Szafraniec, M., Grabias-Blicharz, E., Barnat-Hunek, D., & Landis, E. N. (2022) · Materials · doi:10.3390/ma15217706 · Cited by 34
Shi, Z., Huang, J., Liu, C., Ding, B., Kuga, S., Cai, J., & Zhang, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06232 · Cited by 29
Peng, C., Yang, Q., Zhao, W., Ren, J., Yu, Q., Hu, Y., & Zhang, X. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.04.029 · Cited by 28
Suzuki, K., Homma, Y., Igarashi, Y., Okumura, H., & Yano, H. (2017) · Cellulose · doi:10.1007/s10570-017-1355-1 · Cited by 28
“…produce nanocellulose composites since the initial report by Favier et al. (1995), and many studies have been reported applying this method; e.g., CNC-reinforced PP (Ljungberg et al. 2005) and MFC-reinforced polylactic acid (PLA) (Tingaut et al. 2009; Iwatake et al. 2008; Suryanegara et al. 2009).”
BackgroundPolymer nanocomposites with cellulose nanocrystals made by co‐precipitation
Natterodt, J. C., Shirole, A., Sapkota, J., Zoppe, J. O., & Weder, C. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45648 · Cited by 27
Xu, S., Gu, J., Luo, Y., Jia, D., & Yan, L. (2014) · Polymer Composites · doi:10.1002/pc.23005 · Cited by 27
Isotactic polypropylene reinforced atactic polypropylene by formation of shish-kebab superstructure
Zhang, Z., Deng, L., Lei, J., & Li, Z. (2015) · Polymer · doi:10.1016/j.polymer.2015.09.070 · Cited by 26
Dendronization of cellulose nanowhisker with cationic hyperbranched dendritic polyamidoamine
Tehrani, A. D., & Basiryan, A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.004 · Cited by 26
ADVANCED FUNCTIONAL MATERIALS BASED ON CELLULOSE
Zhang, J., & Zhang, J. P. (2010) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2010.10238 · Cited by 26
Li, D., Zhou, J., Ma, X., & Li, J. (2019) · Cellulose · doi:10.1007/s10570-019-02708-2 · Cited by 27
Novel acrylic/nanocellulose microsphere with improved adhesive properties
Kajtna, J., & Šebenik, U. (2016) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2016.11.013 · Cited by 27
Soeta, H., Fujisawa, S., Saito, T., & Isogai, A. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.05.010 · Cited by 27
Cellulose nanofillers for food packaging
Olsson, R. T., Fogelström, L., Martínez‐Sanz, M., & Henriksson, M. (2011) · Elsevier eBooks · doi:10.1533/9780857092786.1.86 · Cited by 25
Nanocellulose Reinforced Polypropylene and Polyethylene Composite for Packaging Application
Norrrahim, M. N. F., Yasim‐Anuar, T. A. T., Sapuan, S. M., Ilyas, R. A., Hakimi, M. I., Najmuddin, S. U. F. S., & Jenol, M. A. (2021) · Wiley eBooks · doi:10.1002/9781119381228.ch8 · Cited by 27
Zhang, X., & Wang, X. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.124 · Cited by 25
Polysaccharide-based natural and synthetic nanocomposites
Bogdanova, O. I., & Чвалун, С. Н. (2016) · Polymer Science Series A · doi:10.1134/s0965545x16050047 · Cited by 23
Cellulose Nanocomposites for High-Performance Applications
Cherian, B. M., Leão, A. L., de Souza, S. F., Thomas, S., Pothan, L. A., & Kottaisamy, M. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_21 · Cited by 25
Yu, H., & Yan, C. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch12 · Cited by 32
Tofu-Incorporated Hydrogels for Potential Bone Regeneration
Huang, K., Gu, Z., & Wu, J. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01997 · Cited by 23
Thermal and mechanical characterization of EVA/banana fiber‐derived cellulose composites
Elanthikkal, S., Unnikrishnan, G. P., Varghese, S., & Guthrie, J. T. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35140 · Cited by 22
Engineering nanocellulose percolation network for flexible strain sensor
Wang, Q., Feng, S., Liu, J., Liu, H., Tu, W., & Zhu, Q. (2024) · Cellulose · doi:10.1007/s10570-024-05955-0 · Cited by 22
“The rigid nanocellulose percolating network could effectively transfer mechanical stresses throughout the polymer matrix due to its interconnected structure and the presence of physical and chemical cross-linking (Ljungberg et al. 2005; Miao and Hamad 2013, 2019).”
Okura, H., Wada, M., & Serizawa, T. (2014) · Chemistry Letters · doi:10.1246/cl.131181 · Cited by 21
Novel CNC/silica hybrid as potential reinforcing filler for natural rubber compounds
Ali, S. D., Imiete, I. E., Orlandi, M. E., Castellani, L., Hanel, T., & Zoia, L. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48332 · Cited by 21
Polypropylene/Spray Dried and Silane‐Treated Nanofibrillated Cellulose Composites
TABAK, C., Keskin, S., Akbaşak, T., & Özkoç, G. (2019) · Polymer Engineering and Science · doi:10.1002/pen.25290 · Cited by 21
Ebadi, Z., Ghaisari, H. R., Tajeddin, B., & Shekarforoush, S. S. (2021) · Food Science & Nutrition · doi:10.1002/fsn3.2194 · Cited by 21
“In the investigation by Ljungberg et al. (2005), nanocomposite materials showed higher EB % and lower fragility compared to more aggregated samples, which is in accordance with our results.”
ResultNanocomposites: Recent Development and Potential Automotive Applications
Wang, Z., & Xiao, H. (2008) · SAE International Journal of Materials and Manufacturing · doi:10.4271/2008-01-1263 · Cited by 22
Khattab, M. M., Hady, N. A. A., & Dahman, Y. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00021-8 · Cited by 24
Rogovina, S. Z., Aleksanyan, K. V., Vladimirov, L. V., Prut, E. V., Ivanushkina, N. E., & Berlin, A. A. (2017) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-1069-3 · Cited by 20
Billah, S. M. R. (2019) · Polymers and polymeric composites · doi:10.1007/978-3-319-92067-2_15-1 · Cited by 23
Timhadjelt, L., Sérier, A., Belgacem, M. N., & Bras, J. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.02.040 · Cited by 20
Sojoudiasli, H., Heuzey, M., Carreau, P. J., & Riedl, B. (2017) · Rheologica Acta · doi:10.1007/s00397-017-1022-3 · Cited by 19
“Toluene has also been used to disperse CNCs in an atactic polypropylene by solvent casting (Ljungberg et al. 2005).”
MethodDang, X., Cao, X., Ke, L., Ma, Y., An, J., & Wang, F. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45387 · Cited by 21
Shin, H., Kim, S., Kim, J., Kong, S., Lee, Y., & Lee, J. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51848 · Cited by 20
Lalia, B. S., Samad, Y. A., & Hashaikeh, R. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.04.045 · Cited by 19
Mohammadi, M. S., Hammerquist, C. C., Simonsen, J., & Nairn, J. A. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0143-x · Cited by 21
Kim, H. J., & Lee, W. J. (2023) · Materials · doi:10.3390/ma16062323 · Cited by 19
“Poor interaction between the CNCs and polymeric matrices [15] and a limited set of solvents for suspensions hinder the inter-matrix dispersion of fibrils [16].”
BackgroundStructure and Properties of Cellulose Nanocrystals
Chang, C., Hou, J., Chang, P. R., & Huang, J. T. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch2 · Cited by 23
P(CL-b-LLA) diblock copolymers grafting onto cellulosic nanocrystals
Mano, V., Chimenti, S., Ruggeri, G., Pereira, F. V., & de Paula, E. L. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-1919-0 · Cited by 18
Zhang, R., Zhu, C., Shan, X., Xia, J., Zhu, Q., & Hu, Y. Z. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39383 · Cited by 18
Deng, F., Li, M., Ge, X., Zhang, Y., & Cho, U. R. (2015) · Polymer Composites · doi:10.1002/pc.23875 · Cited by 17
Zhao, X., Xing, J., An, N.-N., Li, D., Wang, L., & Wang, Y. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.10.065 · Cited by 16
Cellulose nanoparticles as reinforcement in polymer nanocomposites
Ramires, E. C., & Dufresne, A. (2012) · Elsevier eBooks · doi:10.1533/9780857096241.1.131 · Cited by 19
Shear rheology of cellulose nanocrystal (CNC) aqueous suspensions
Shafiei-Sabet, S. (2014) · Open Collections · doi:10.14288/1.0165728 · Cited by 17
de Campos, A., Corrêa, A. C., Claro, P. I. C., Teixeira, E. D. M., & Marconcini, J. M. (2019) · Springer eBooks · doi:10.1007/978-3-030-05399-4_1 · Cited by 16
Dispersion of Nanocellulose (NC) in Polypropylene (PP) and Polyethylene (PE) Matrix
Pandey, J. K., Lee, H., Takagi, H., Ahn, S., Saini, D. R., & Misra, M. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_56 · Cited by 16
Biocompatible, Resilient, and Tough Nanocellulose Tunable Hydrogels
Rudich, A., Sapru, S., & Shoseyov, O. (2023) · Nanomaterials · doi:10.3390/nano13050853 · Cited by 14
Cotton linter nano-fibers as the potential reinforcing agent for guar gum
Karande, V. S., Bharimalla, A. K., Vigneshwaran, N., Kadam, P., & Mhaske, S. T. (2014) · Iranian Polymer Journal · doi:10.1007/s13726-014-0283-2 · Cited by 14
“Many researchers have worked on biodegradable polymeric films such as starch [20–22], soy protein [23], silk fibroin [24], polylactide (PLA) [25] or poly(vinyl alcohol) (PVA) [26] and non-biodegradable polymeric films such as polypropylene [27], poly(vinyl chloride) [28], poly(oxyethylene) [29] and epoxy resin [30] fo…”
BackgroundBesbes, I., Magnin, A., & Boufi, S. (2011) · Polymer Composites · doi:10.1002/pc.21232 · Cited by 14
Miyazaki, K., Hamadate, M., Terano, M., & Nakatani, H. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38284 · Cited by 15
Chemical and Physical Techniques for Surface Modification of Nanocellulose Reinforcements
Pakharenko, V., Pervaiz, M. A., Pande, H., Sain, M. M., & Sain, M. M. (2016) · Wiley eBooks · doi:10.1002/9781119185093.ch8 · Cited by 14
Miyazaki, K., Moriya, K., Okazaki, N., Terano, M., & Nakatani, H. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29203 · Cited by 14
TiO2/nanocellulose hybrids as functional additives for advanced polypropylene nanocomposites
Zielińska, D., Siwińska-Ciesielczyk, K., Bula, K., Jesionowski, T., & Borysiak, S. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.114314 · Cited by 13
Necolau, M. I., Bălănucă, B., Frone, A. N., & Damian, C. M. (2023) · ACS Omega · doi:10.1021/acsomega.2c07033 · Cited by 13
Micro and nanoengineered structures and compounds: nanocellulose
Lengowski, E. C., Franco, T. S., Viana, L. M. M., Júnior, E. A. B., & de Muñiz, G. I. B. (2023) · Cellulose · doi:10.1007/s10570-023-05532-x · Cited by 13
“Better dispersion of CNC nanocellulose results in higher transparency and mechanical properties in atactic polypropylene (Ljungberg et al. 2005) Young’s modulus improves in polypropylene (Kho-shkava et al. 2015) and high-density polypropylene (Iyer et al. 2015), where the increase is greater than…”
BackgroundEffect of dendrimer‐like PAMAM grafted attapulgite on the microstructure and morphology of Nylon‐6
Xia, L., Shentu, B., & Weng, Z. (2013) · Polymer Composites · doi:10.1002/pc.22704 · Cited by 13
Esterification of Cellulose Nanofibers with Valeric Acid and Hexanoic Acid
Her, K., Jeon, S. H., Lee, S., & Shim, B. S. (2020) · Macromolecular Research · doi:10.1007/s13233-020-8146-5 · Cited by 13
Characterization and Processing of Nanocellulose Thermosetting Composites
Sabo, R. C., Elhajjar, R. F., Clemons, C. M., & Pillai, K. M. (2014) · Springer eBooks · doi:10.1007/978-3-642-45232-1_64 · Cited by 14
Billah, S. M. R. (2019) · Polymers and polymeric composites · doi:10.1007/978-3-319-95987-0_15 · Cited by 17
Properties of cellulose reinforced composites: A review
Ofem, M. I., Ene, E. B., Ubi, P. A., Odey, S., & Fakorede, D. O. (2020) · Nigerian Journal of Technology · doi:10.4314/njt.v39i2.9 · Cited by 14
“Nano composites films were produced using atactic polypropylene (PP) polymer as matrix [100].”
MethodYuan, J., Liu, D., Tian, Y. M., Tang, H., Wang, S., Song, J., & Jia, H. (2024) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2024.133351 · Cited by 12
Preparation of cellulose nanocomposites
Dufresne, A. (2011) · Elsevier eBooks · doi:10.1533/9780857092281.1.82 · Cited by 13
Nakatani, H., Hashimoto, K., Miyazaki, K., & Terano, M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30298 · Cited by 12
Chemical Modification of Nanocelluloses
Habibi, Y. (2013) · Wiley eBooks · doi:10.1002/9781118609958.ch16 · Cited by 12
Research Progress in Nano-Cellulose Modification
Cheng, Z., Xu, Q. H., & Gao, Y. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.627.859 · Cited by 12
An effective medium model for the elastic moduli of fiber networks and nanocomposites
Chatterjee, A. P., & Prokhorova, D. A. (2007) · Journal of Applied Physics · doi:10.1063/1.2732437 · Cited by 12
Benkaddour, A., Rusin, C. J., Demir, E. C., Ayranci, C., & McDermott, M. T. (2023) · Cellulose · doi:10.1007/s10570-023-05313-6 · Cited by 11
Nanocellulose as a template for the production of advanced nanostructured material
Prusty, K., Sahu, D. K., & Swain, S. K. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00019-x · Cited by 11
Sato, A., Yoshimura, T., Kabusaki, D., Okumura, H., Homma, Y., Nakatsubo, F., & Yano, H. (2019) · Cellulose · doi:10.1007/s10570-019-02544-4 · Cited by 13
Key issues in reinforcement involving nanocellulose
Robles, E., Labidi, J., Halász, K., & Csóka, L. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00018-8 · Cited by 13
Metadata
- Authors
- Ljungberg, N., Bonini, C., Bortolussi, F., Boisson, C., Heux, L., & Cavaillé
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Centre de Recherches sur les Macromolécules Végétales (CERMAV-CNRS), Université Joseph Fourier, BP 53, 38041 Grenoble, France, Laboratoire de Chimie et Procédés de Polymérisation, CNRS/CPE, 69621Villeurbanne, France, and Groupe d'Etudes de Métallurgie Physique et de Physique des Matériaux, UMR CNRS 5510, INSA, 69621 Villeurbanne, France
- Corresponding author
- Heux, L.
- ORCID
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-07-06
- Volume
- 6
- Issue
- 5
- Pages
- 2732-2739
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2048583074
- Cited by
- 395
- References
- 29
- Citations by year
- 2026: 5 · 2025: 3 · 2024: 6 · 2023: 13 · 2022: 10 · 2021: 9 · 2020: 17 · 2019: 22 · 2018: 23 · 2017: 39 · 2016: 32 · 2015: 30 · 2014: 36 · 2013: 34 · 2012: 28
- FWCI
- 4.27
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose whiskers, atactic polypropylene, polymer nanocomposites, surfactant dispersion, filler-matrix interaction, mechanical properties, glass transition, nanocomposite films, solvent casting
- MeSH terms
- Biocompatible Materials, Cellulose, Composite Resins, Glass, Materials Testing, Microscopy, Electron, Scanning, Molecular Weight, Polypropylenes, Rubber, Surface Properties, Surface-Active Agents, Temperature, Tensile Strength, Toluene, Nanotechnology, Macromolecular Substances
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.