Morphology and Properties of Soy Protein and Polylactide Blends
The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
Blends of soy protein (SP) and a semicrystalline polylactide (PLA) were prepared using a twin-screw extruder. The melt rheology, phase morphology, mechanical properties, water resistance, and thermal and dynamic mechanical properties were investigated on specimens prepared by injection molding of these blends. The melt flowability of soy-based plastics was improved through blending with PLA. Scanning electron microscopy revealed that a co-continuous phase structure existed in the blends with soy protein concentrate (SPC) to PLA ratios ranging from 30:70 to 70:30. SPC/PLA blends showed fine co-continuous phase structures, while soy protein isolate (SPI)/PLA blends presented severe phase coarsening. At the same SP to PLA ratios, SPC/PLA blends demonstrated a higher tensile strength than SPI/PLA blends. The water absorption of soy plastics was greatly reduced by blending with PLA. The compatibility was improved by adding 1-5 phr poly(2-ethyl-2-oxazoline) (PEOX) in the blends, and the resulting blends showed an obvious increase in tensile strength and a reduction in water absorption for SPI/PLA blends. The compatibility between SP and PLA was evaluated by mechanical testing, dynamic mechanical analysis (DMA), water absorption, and scanning electron microscopy (SEM) experiments. Differential scanning calorimetry (DSC) revealed that PLA in the blends was mostly amorphous in the injection molded articles, and SP accelerated the cold crystallization and could increase the final crystallinity of PLA in the blends.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends
Jiang, L., Wolcott, M. P., & Zhang, J. (2006) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 954
Self-citationProtein-Based Films and Coatings
(2002) · CRC Press eBooks · doi:10.1201/9781420031980 · Cited by 618
AOI, K. (1996) · Progress in Polymer Science · doi:10.1016/0079-6700(95)00020-8 · Cited by 402
Morphology and Properties of Soy Protein Isolate Thermoplastics Reinforced with Chitin Whiskers
Lu, Y., Weng, L., & Zhang, L. (2004) · Biomacromolecules · doi:10.1021/bm034516x · Cited by 356
Mechanical and thermal properties of extruded soy protein sheets
Zhang, J., Mungara, P., & Jane, J. (2001) · Polymer · doi:10.1016/s0032-3861(00)00624-8 · Cited by 331
Self-citationStrengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocyanate
Wang, H., Sun, X., & Seib, P. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2018 · Cited by 279
High performance LDPE/thermoplastic starch blends: a sustainable alternative to pure polyethylene
Rodriguez-Gonzalez, F. J., Ramsay, B. A., & Favis, B. D. (2003) · Polymer · doi:10.1016/s0032-3861(02)00907-2 · Cited by 260
Blends of isotactic polypropylene and ethylene-propylene rubbers: rheology, morphology and mechanics
Danesi, S., & Porter, R. S. (1978) · Polymer · doi:10.1016/0032-3861(78)90255-0 · Cited by 260
Ljungberg, N., Andersson, T., & Wesslén, B. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12106 · Cited by 200
The Role of the Blend Interface Type on Morphology in Cocontinuous Polymer Blends
Li, J., Ma, P. L., & Favis, B. D. (2002) · Macromolecules · doi:10.1021/ma010104+ · Cited by 189
Zhong, Z., & Sun, X. S. (2001) · Polymer · doi:10.1016/s0032-3861(01)00118-5 · Cited by 181
Co-continuous morphologies in polymer blends: the influence of the interfacial tension
Willemse, R. C., Posthuma de Boer, A., van Dam, J., & Gotsis, A. D. (1999) · Polymer · doi:10.1016/s0032-3861(98)00307-3 · Cited by 174
Lichkus, A. M., Painter, P. C., & Coleman, M. M. (1988) · Macromolecules · doi:10.1021/ma00186a054 · Cited by 154
Everaert, V., Aerts, L., & Groeninckx, G. (1999) · Polymer · doi:10.1016/s0032-3861(99)00048-8 · Cited by 148
Ke, T., & Sun, X. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1758 · Cited by 133
Effects of Polyhydric Alcohols on the Mechanical Properties of Soy Protein Plastics
Wang, S., Sue, H., & Jane, J. (1996) · Journal of Macromolecular Science Part A · doi:10.1080/10601329608010878 · Cited by 128
Self-citationThermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends
Liu, X., Dever, M., Fair, N., & Benson, R. S. (1997) · Journal of Polymers and the Environment · doi:10.1007/bf02763666 · Cited by 126
New Evidences of Glass Transitions and Microstructures of Soy Protein Plasticized with Glycerol
Chen, P., & Zhang, L. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400179 · Cited by 123
Thomas, S., & Groeninckx, G. (1999) · Polymer · doi:10.1016/s0032-3861(98)00813-1 · Cited by 110
Crystalline and supermolecular structure of polylactide in relation to the crystallization method
Pluta, M., & Galeski, A. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11280 · Cited by 106
Effects of extrusion upon soy concentrate solubility
Hager, D. F. (1984) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf00122a029 · Cited by 106
Lipase-catalyzed ring-opening polymerization of medium-size lactones to polyesters
Kobayashi, S., Takeya, K., Suda, S., & Uyama, H. (1998) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(19980801)199:8<1753::aid-macp1753>3.0.co;2-o · Cited by 101
Biodegradable soy protein–polyester blends by reactive extrusion process
Graiver, D., Waikul, L. H., Berger, C., & Narayan, R. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20344 · Cited by 83
Paetau, I., Chen, C., & Jane, J. (1994) · Journal of Polymers and the Environment · doi:10.1007/bf02067447 · Cited by 80
Self-citationEffects of lignin as a filler on properties of soy protein plastics. I. Lignosulfonate
Huang, J. T., Zhang, L., & Chen, F. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12185 · Cited by 74
Otaigbe, J. U., & Adams, D. O. (1997) · Journal of Polymers and the Environment · doi:10.1007/bf02763664 · Cited by 70
Urayama, H., Ma, C., & Kimura, Y. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200350004 · Cited by 65
Miscibility of poly(2-oxazolines) with commodity polymers
Kobayashi, S., Kaku, M., & Saegusa, T. (1988) · Macromolecules · doi:10.1021/ma00180a009 · Cited by 64
Pressure- volume- temperature relationships of soy protein isolate/starch plastic
Otaigbe, J. U., & Jane, J. (1997) · Journal of Polymers and the Environment · doi:10.1007/bf02763590 · Cited by 61
Self-citationWalia, P. S., Lawton, J. W., Shogren, R. L., & Felker, F. C. (2000) · Polymer · doi:10.1016/s0032-3861(00)00149-x · Cited by 58
Morphology and properties of soy protein plastics modified with chitin
Zheng, H., Tan, Z., Ran Zhan, Y., & Huang, J. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12997 · Cited by 57
Chen, Y., Zhang, L., & Du, L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0301381 · Cited by 55
Chang, L.-C., Xue, Y., & Hsieh, F. (2001) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010404)80:1<81::aid-app1078>3.0.co;2-b · Cited by 51
Chang, L.-C., Xue, Y., & Hsieh, F. (2001) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20010404)80:1<10::aid-app1068>3.0.co;2-y · Cited by 51
Endo, K., & Senoo, K. (1999) · Polymer · doi:10.1016/s0032-3861(99)00174-3 · Cited by 35
Properties of soy protein isolate/poly(ethylene‐co‐ethyl acrylate‐co‐maleic anhydride) blends
Zhong, Z., & Sun, S. X. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11714 · Cited by 33
Zhang, X. C., Butler, M. F., & Cameron, R. E. (1999) · Polymer International · doi:10.1002/(sici)1097-0126(199911)48:11<1165::aid-pi286>3.0.co;2-l · Cited by 26
Bartczak, Z., Gałęski, A., & Pluta, M. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000620)76:12<1785::aid-app8>3.0.co;2-b · Cited by 21
Complexation between poly(hydroxyether of bisphenol-A) and three tertiary amide polymers
Dai, J., Goh, S. H., Lee, S. Y., & Siow, K. S. (1996) · Polymer · doi:10.1016/0032-3861(96)88471-0 · Cited by 18
Miscibility behaviour in blends of copolymers of vinyl alcohol with poly(ethyloxazoline)
Parada, L. G., Meaurio, E., Cesteros, L. C., & Katime, I. (1998) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(19980801)199:8<1597::aid-macp1597>3.0.co;2-4 · Cited by 15
Miscibility and specific interactions in two polyelectrolyte/poly(2-ethyl-2-oxazoline) blend systems
Goh, S. H., Lee, S. Y., Xu, Z., & Tan, K. L. (1999) · Polymer · doi:10.1016/s0032-3861(98)00501-1 · Cited by 7
Miscibility of conductive blends of poly(o-anisidine) with poly(2-alkyl-2-oxazoline)s
Ong, C. H., Goh, S. H., & Chan, H. S. O. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970711)65:2<391::aid-app20>3.0.co;2-1 · Cited by 6
Polymers Energize Japanese Industry
Yanami, T. (2005) · Kobunshi · doi:10.1295/kobunshi.54.233 · Cited by 3
Research works printed but not linked: 2
- Wang C., 2002, Part B: Polym. Phys
- Jane J., 1996, Patent 5,523,293
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its Precursors
Inkinen, S., Hakkarainen, M., Albertsson, A.-C., & Södergård, A. (2011) · Biomacromolecules · doi:10.1021/bm101302t · Cited by 710
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Metadata
- Authors
- Zhang, J., Jiang, L., Zhu, L., Jane, J.-L., & Mungara, P.
- Affiliations
- Washington State University (US)
- Iowa State University (US)
- Corresponding author
- Zhang, Jinwen
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-04-19
- Volume
- 7
- Issue
- 5
- Pages
- 1551-1561
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2028401332
- Cited by
- 176
- References
- 42
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 4 · 2023: 3 · 2022: 5 · 2021: 1 · 2020: 7 · 2019: 2 · 2018: 12 · 2017: 11 · 2016: 12 · 2015: 14 · 2014: 8 · 2013: 9 · 2012: 10
- FWCI
- 6.43
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Iowa State University Digital Repository (Iowa State University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- soy protein, polylactic acid, polymer blends, phase coarsening, soy protein isolate, soy protein concentrate, poly(2-ethyl-2-oxazoline), blend compatibility, melt rheology, water absorption, tensile strength, cold crystallization, crystallinity, biodegradable plastics
- MeSH terms
- Calorimetry, Differential Scanning, Kinetics, Microscopy, Electron, Scanning, Polyesters, Glycine max, Stress, Mechanical, Thermodynamics, Soybean Proteins
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.