Morphology and Properties of Soy Protein and Polylactide Blends
The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Abstract
Blends of soy protein (SP) and a semicrystalline polylactide (PLA) were prepared using a twin-screw extruder. The melt rheology, phase morphology, mechanical properties, water resistance, and thermal and dynamic mechanical properties were investigated on specimens prepared by injection molding of these blends. The melt flowability of soy-based plastics was improved through blending with PLA. Scanning electron microscopy revealed that a co-continuous phase structure existed in the blends with soy protein concentrate (SPC) to PLA ratios ranging from 30:70 to 70:30. SPC/PLA blends showed fine co-continuous phase structures, while soy protein isolate (SPI)/PLA blends presented severe phase coarsening. At the same SP to PLA ratios, SPC/PLA blends demonstrated a higher tensile strength than SPI/PLA blends. The water absorption of soy plastics was greatly reduced by blending with PLA. The compatibility was improved by adding 1-5 phr poly(2-ethyl-2-oxazoline) (PEOX) in the blends, and the resulting blends showed an obvious increase in tensile strength and a reduction in water absorption for SPI/PLA blends. The compatibility between SP and PLA was evaluated by mechanical testing, dynamic mechanical analysis (DMA), water absorption, and scanning electron microscopy (SEM) experiments. Differential scanning calorimetry (DSC) revealed that PLA in the blends was mostly amorphous in the injection molded articles, and SP accelerated the cold crystallization and could increase the final crystallinity of PLA in the blends.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Natural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Study of Biodegradable Polylactide/Poly(butylene adipate-co-terephthalate) Blends
Jiang, L., Wolcott, M. P., & Zhang, J. (2006) · Biomacromolecules · doi:10.1021/bm050581q · Cited by 954
Self-citationProtein-Based Films and Coatings
(2002) · CRC Press eBooks · doi:10.1201/9781420031980 · Cited by 618
AOI, K. (1996) · Progress in Polymer Science · doi:10.1016/0079-6700(95)00020-8 · Cited by 402
Morphology and Properties of Soy Protein Isolate Thermoplastics Reinforced with Chitin Whiskers
Lu, Y., Weng, L., & Zhang, L. (2004) · Biomacromolecules · doi:10.1021/bm034516x · Cited by 356
Mechanical and thermal properties of extruded soy protein sheets
Zhang, J., Mungara, P., & Jane, J. (2001) · Polymer · doi:10.1016/s0032-3861(00)00624-8 · Cited by 331
Self-citationStrengthening blends of poly(lactic acid) and starch with methylenediphenyl diisocyanate
Wang, H., Sun, X., & Seib, P. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.2018 · Cited by 279
High performance LDPE/thermoplastic starch blends: a sustainable alternative to pure polyethylene
Rodriguez-Gonzalez, F. J., Ramsay, B. A., & Favis, B. D. (2003) · Polymer · doi:10.1016/s0032-3861(02)00907-2 · Cited by 260
Blends of isotactic polypropylene and ethylene-propylene rubbers: rheology, morphology and mechanics
Danesi, S., & Porter, R. S. (1978) · Polymer · doi:10.1016/0032-3861(78)90255-0 · Cited by 260
Ljungberg, N., Andersson, T., & Wesslén, B. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12106 · Cited by 200
Research works printed but not linked: 2
- Wang C., 2002, Part B: Polym. Phys
- Jane J., 1996, Patent 5,523,293
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., & Auras, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,329
From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its Precursors
Inkinen, S., Hakkarainen, M., Albertsson, A.-C., & Södergård, A. (2011) · Biomacromolecules · doi:10.1021/bm101302t · Cited by 710
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Improving mechanical performance of injection molded PLA by controlling crystallinity
Harris, A. M., & Lee, E. C. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27261 · Cited by 545
Polylactides—Chemistry, Properties and Green Packaging Technology: A Review
Ahmed, J., & Varshney, S. K. (2011) · International Journal of Food Properties · doi:10.1080/10942910903125284 · Cited by 454
Biodegradable Soy Protein Isolate-Based Materials: A Review
Song, F., Tang, D.-L., Wang, X.-L., & Wang, Y.-Z. (2011) · Biomacromolecules · doi:10.1021/bm200904x · Cited by 364
Soy protein – Poly (lactic acid) bilayer films as biodegradable material for active food packaging
González, A., & Alvarez Igarzabal, C. I. (2013) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.03.010 · Cited by 299
Fabrication, properties and applications of soy-protein-based materials: A review
Tian, H., Guo, G., Fu, X., Yao, Y., Yuan, L., & Xiang, A. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.08.110 · Cited by 248
Zhang, N., Wang, Q., Ren, J., & Wang, L. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3049-4 · Cited by 240
The second green revolution? Production of plant-based biodegradable plastics
Mooney, B. P. (2009) · Biochemical Journal · doi:10.1042/bj20081769 · Cited by 227
Study of Hydrogen-Bonded Blend of Polylactide with Biodegradable Hyperbranched Poly(ester amide)
Lin, Y., Zhang, K.-Y., Dong, Z.-M., Dong, L.-S., & Li, Y.-S. (2007) · Macromolecules · doi:10.1021/ma070989a · Cited by 218
Spinella, S., Lo Re, G., Liu, B., Dorgan, J., Habibi, Y., Leclère, P., Raquez, J.-M., Dubois, P., & Gross, R. A. (2015) · Polymer · doi:10.1016/j.polymer.2015.02.048 · Cited by 197
Mehrabi Mazidi, M., Edalat, A., Berahman, R., & Hosseini, F. S. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00557 · Cited by 170
Polycaprolactone: Synthesis, Properties, and Applications
Guarino, V., Gentile, G., Sorrentino, L., & Ambrosio, L. (2017) · Encyclopedia of Polymer Science and Technology · doi:10.1002/0471440264.pst658 · Cited by 163
Tang, Z., Zhang, C., Liu, X., & Zhu, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.34799 · Cited by 159
Kakroodi, A. R., Kazemi, Y., Nofar, M., & Park, C. B. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.130 · Cited by 157
Toughening of polylactic acid: an overview of research progress
Krishnan, S., Pandey, P., Mohanty, S., & Nayak, S. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098698 · Cited by 147
Mihai, M., Huneault, M. A., & Favis, B. D. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30338 · Cited by 161
Chen, D., Li, J., & Ren, J. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.04.007 · Cited by 144
The Potential of Proteins for Producing Food Packaging Materials: A Review
Gómez‐Estaca, J., Gavara, R., Catalá, R., & Hernández-Muñoz, P. M. (2016) · Packaging Technology and Science · doi:10.1002/pts.2198 · Cited by 134
Ayutthaya, S. I. N., Tanpichai, S., & Wootthikanokkhan, J. (2015) · Journal of Polymers and the Environment · doi:10.1007/s10924-015-0725-8 · Cited by 137
Toughness decrease of PLA‐PHBHHx blend films upon surface‐confined photopolymerization
Rasal, R. M., & Hirt, D. E. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32009 · Cited by 120
Biomedical applications of soy protein: A brief overview
Tansaz, S., & Boccaccini, A. R. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35569 · Cited by 121
Structure and Properties of Soy Protein/Poly(butylene succinate) Blends with Improved Compatibility
Li, Y.-D., Zeng, J., Wang, X., Yang, K., & Wang, Y. (2008) · Biomacromolecules · doi:10.1021/bm800745p · Cited by 105
Tian, H., Wang, Y., Zhang, L., Quan, C., & Zhang, X. (2010) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.02.009 · Cited by 103
Zhu, R., Liu, H., & Zhang, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300118x · Cited by 94
Self-citationReactive compatibilization of biodegradable poly(butylene succinate)/Spirulina microalgae composites
Zhu, N., Ye, M., Shi, D., & Chen, M. (2017) · Macromolecular Research · doi:10.1007/s13233-017-5025-9 · Cited by 96
A Review on Material and Antimicrobial Properties of Soy Protein Isolate Film
Rani, S., & Kumar, R. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01456-5 · Cited by 96
Zhang, N., Zeng, C., Wang, L., & Ren, J. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0448-z · Cited by 94
Cellulose/Soy Protein Isolate Blend Films Prepared via Room-Temperature Ionic Liquid
Wu, R., Wang, X., Wang, Y., Bian, X., & Li, F. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie9001052 · Cited by 95
Kasapis, S. (2008) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408390701347769 · Cited by 83
Shin, H., Thanakkasaranee, S., Sadeghi, K., & Seo, J. (2022) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2022.100966 · Cited by 94
Varshney, N., Sahi, A. K., Poddar, S., & Mahto, S. K. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.05.090 · Cited by 85
Novel High‐Strength Thermoplastic Starch Reinforced by in situ Poly(lactic acid) Fibrillation
Jiang, L., Liu, B., & Zhang, J. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900018 · Cited by 81
Self-citationHenna, P. H., & Larock, R. C. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700209 · Cited by 80
Biodegradable and Biobased Polymers
Jiang, L., & Zhang, J. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-39040-8.00007-9 · Cited by 92
Self-citationBiorenewable blends of polyamide‐11 and polylactide
Patel, R. P., Ruehle, D. A., Dorgan, J. R., Halley, P. J., & Martin, D. J. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23692 · Cited by 81
Xie, D.-Y., Song, F., Zhang, M., Wang, X., & Wang, Y. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04185 · Cited by 74
Chen, F., Liu, L., Cooke, P. H., Hicks, K. B., & Zhang, J. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800930j · Cited by 72
Self-citationXie, D.-Y., Qian, D., Song, F., Wang, X., & Wang, Y. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01266 · Cited by 71
Henna, P. H., & Larock, R. C. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29574 · Cited by 68
Biodegradable Polymers and Polymer Blends
Jiang, L., & Zhang, J. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4557-2834-3.00006-9 · Cited by 86
Self-citationDAI, X. H., Cao, Y., Shi, X., & Wang, X. (2016) · RSC Advances · doi:10.1039/c6ra14190k · Cited by 69
Preparation and characterization of polylactide/thermoplastic konjac glucomannan blends
Changgang, X., Luo, X., Lin, X., Zhuo, X., & Liang, L. (2009) · Polymer · doi:10.1016/j.polymer.2009.06.007 · Cited by 66
Yu, J., Cui, G., Wei, M., & Huang, J. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25969 · Cited by 64
Biobased thermosets from the free‐radical copolymerization of conjugated linseed oil
Henna, P. H., Andjelkovic, D. D., Kundu, P. P., & Larock, R. C. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25788 · Cited by 64
Calábria, L., Vieceli, N., Bianchi, O., de Oliveira, R. V. B., Filho, I. D. N., & Schmidt, V. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.08.003 · Cited by 64
Guo, X., Zhang, J., & Huang, J. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.050 · Cited by 67
Self-citationImproving the crystallization and fire resistance of poly(lactic acid) with nano-ZIF-8@GO
Zhang, M., Shi, X., DAI, X. H., Huo, C., Xie, J., Li, X., & Wang, X. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2049-2 · Cited by 61
Chen, F., & Zhang, J. (2010) · Polymer · doi:10.1016/j.polymer.2010.02.035 · Cited by 60
Self-citationThe physical properties of poly(l-lactide) and functionalized eggshell powder composites
Li, Y., Xin, S., Bian, Y., Xu, K., Han, C., & Dong, L. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.12.070 · Cited by 66
Liang, S., Huang, Q., Liu, L., & Yam, K. L. (2009) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200900053 · Cited by 57
Synergetic Effect of Dual Compatibilizers on in Situ Formed Poly(Lactic Acid)/Soy Protein Composites
Liu, B., Jiang, L., Liu, H., & Zhang, J. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie100218t · Cited by 53
Self-citationRobust soy protein films obtained by slight chemical modification of polypeptide chains
Ma, L., Yang, Y., Yao, J., Shao, Z., & Chen, X. (2013) · Polymer Chemistry · doi:10.1039/c3py00557g · Cited by 55
Structure and properties of soy protein films plasticized with hydroxyamine
Tian, H., Liu, D., & Zhang, L. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29160 · Cited by 53
Green Polymer Nanocomposites in Automotive and Packaging Industries
Susan, M. A. B. H., Harun‐Ur‐Rashid, M., & Imran, A. B. (2022) · Current Pharmaceutical Biotechnology · doi:10.2174/1389201023666220506111027 · Cited by 53
Natural Electroactive Hydrogel from Soy Protein Isolation
Tian, K., Shao, Z., & Chen, X. (2010) · Biomacromolecules · doi:10.1021/bm101094g · Cited by 52
Chen, F., & Zhang, J. (2009) · Polymer · doi:10.1016/j.polymer.2009.06.004 · Cited by 50
Self-citationGao, M., Ren, Z., Yan, S., Sun, J., & Chen, X. (2012) · The Journal of Physical Chemistry B · doi:10.1021/jp3041378 · Cited by 50
Mechanical and thermal properties of biocomposites from poly(lactic acid) and DDGS
Li, Y., & Sun, X. S. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33681 · Cited by 48
Canola Protein: A Promising Protein Source for Delivery, Adhesive, and Material Applications
Bandara, N., Akbari, A., Esparza, Y., & Wu, J. (2018) · Journal of the American Oil Chemists Society · doi:10.1002/aocs.12039 · Cited by 45
Soy protein plastics reinforced and toughened by SiO2 nanoparticles
Ai, F., Zheng, H. R., Wei, M., & Huang, J. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26175 · Cited by 42
Thermoplastic Soy Protein Nanocomposites Reinforced by Carbon Nanotubes
Zheng, H. S., Ai, F., Wei, M., Huang, J., & Chang, P. R. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700052 · Cited by 42
Biodegradable Blends From Plasticized Soy Meal, Polycaprolactone, and Poly(butylene succinate)
Reddy, M. M., Mohanty, A. K., & Misra, M. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100203 · Cited by 41
Morphology and mechanical properties of soy protein scaffolds made by directional freezing
Guan, J., Porter, D., Tian, K., Shao, Z., & Chen, X. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32579 · Cited by 41
Li, Y.-D., Zeng, J., Li, W., Yang, K., Wang, X., & Wang, Y. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801718f · Cited by 39
Liu, B., Bhaladhare, S., Zhan, P., Jiang, L., Zhang, J., Liu, L., & Hotchkiss, A. T. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2017948 · Cited by 37
Self-citationLi, Y., Venkateshan, K. C., & Sun, X. S. (2010) · Polymer International · doi:10.1002/pi.2834 · Cited by 36
Li, S., Donner, E., Xiao, H., Thompson, M. R., Zhang, Y., Rempel, C., & Liu, Q. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.07.079 · Cited by 35
Ma, Q., Mohawk, D., Jahani, B., Wang, X., Chen, Y., Mahoney, A., Zhu, J. Y., & Jiang, L. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00717 · Cited by 35
Self-citationFabrication and characterization of polycaprolactone-based green materials for drug delivery
Kurakula, M., Rao, G. S. N. K., & Yadav, K. S. (2021) · Applications of Advanced Green Materials · doi:10.1016/b978-0-12-820484-9.00016-7 · Cited by 34
Zhao, Y. Y., Xu, H., Mu, B., Xu, L., & Yang, Y. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.08.003 · Cited by 34
Development of blend films from soy meal protein and crude glycerol-based waterborne polyurethane
Tong, X., Luo, X., & Li, Y. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.12.063 · Cited by 34
Properties and morphology of poly(lactic acid)/soy protein isolate blends
Fang, K., Wang, B., Sheng, K., & Sun, X. S. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30446 · Cited by 33
Preparation and Properties of Water and Glycerol-plasticized Sugar Beet Pulp Plastics
Liu, B., Zhang, J., Liu, L., & Hotchkiss, A. T. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0322-4 · Cited by 33
Self-citationChen, F., & Zhang, J. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100751c · Cited by 31
Self-citationModification of Soy Protein Plastic with Functional Monomer with Reactive Extrusion
Liu, W., Mohanty, A. K., Askeland, P. A., Drzal, L. T., & Misra, M. (2008) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0095-6 · Cited by 30
Wheat gluten/chitosan blends: A new biobased material
Chen, F., Monnier, X., Gällstedt, M., Gedde, U. W., & Hedenqvist, M. S. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.09.007 · Cited by 30
Reddy, M. M., Mohanty, A. K., & Misra, M. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-6083-6 · Cited by 30
Zhou, X., Mohanty, A. K., & Misra, M. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0578-y · Cited by 30
Du, Y., Li, S., Zhang, Y., Rempel, C., & Liu, Q. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43351 · Cited by 30
Ma, L., Yang, Y., Yao, J., Shao, Z., Huang, Y.-F., & Chen, X. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00523j · Cited by 29
Influence of different amides as plasticizer on the properties of soy protein plastics
Liu, D., Tian, H., & Zhang, L. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26656 · Cited by 29
Compatibilization of Protein Thermoplastics and Polybutylene Succinate Blends
Marsilla, K. I. K., & Verbeek, C. J. R. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400141 · Cited by 28
Soy protein isolate films with improved property via a facile surface coating
Xie, D.-Y., Song, F., Zhang, M., Wang, X., & Wang, Y. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.01.017 · Cited by 28
Physical Properties of Biodegradable Films of Soy Protein Concentrate/Gelling Agent Blends
Kim, J. T., & Netravali, A. N. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100135 · Cited by 26
Nanda, M. R., Misra, M., & Mohanty, A. K. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100053 · Cited by 25
Detyothin, S., Kathuria, A., Jaruwattanayon, W., Selke, S. E. M., & Auras, R. A. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch16 · Cited by 31
Extrusion Foaming of Poly (lactic acid)/Soy Protein Concentrate Blends
Liu, B., Jiang, L., & Zhang, J. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000449 · Cited by 24
Self-citationLi, Y.-D., Chen, S., Zeng, J., & Wang, Y. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800994s · Cited by 23
Madbouly, S. A., & Lendlein, A. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200341 · Cited by 22
Liu, B., Jiang, L., Liu, H., Sun, L., & Zhang, J. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900224 · Cited by 21
Self-citationDey, A., Rahman, M. M., Yodo, N., & Grewell, D. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105316 · Cited by 20
Iyer, K. A., & Torkelson, J. M. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201500019 · Cited by 21
Preparation and Compatibilization of PBS/Whey Protein Isolate Based Blends
Coltelli, M., Aliotta, L., Gigante, V., Bellusci, M., Cinelli, P., Bugnicourt, E., Schmid, M., Staebler, A., & Lazzeri, A. (2020) · Molecules · doi:10.3390/molecules25143313 · Cited by 20
Katopo, L., Kasapis, S., & Hémar, Y. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.10.034 · Cited by 19
Vesterinen, A., Lipponen, S., Rich, J., & Seppala, J. E. (2011) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2011.74 · Cited by 19
Morphology of Molecular Soy Protein Fractions in Binary Composite Gels
Kasapis, S., & Tay, S. L. (2009) · Langmuir · doi:10.1021/la803290j · Cited by 19
Metadata
- Authors
- Zhang, J., Jiang, L., Zhu, L., Jane, J.-L., & Mungara, P.
- Affiliations
- Washington State University (US)
- Iowa State University (US)
- Corresponding author
- Zhang, Jinwen
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-04-19
- Volume
- 7
- Issue
- 5
- Pages
- 1551-1561
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2028401332
- Cited by
- 176
- References
- 42
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 4 · 2023: 3 · 2022: 5 · 2021: 1 · 2020: 7 · 2019: 2 · 2018: 12 · 2017: 11 · 2016: 12 · 2015: 14 · 2014: 8 · 2013: 9 · 2012: 10
- FWCI
- 6.43
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Iowa State University Digital Repository (Iowa State University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- soy protein, polylactic acid, polymer blends, phase coarsening, soy protein isolate, soy protein concentrate, poly(2-ethyl-2-oxazoline), blend compatibility, melt rheology, water absorption, tensile strength, cold crystallization, crystallinity, biodegradable plastics
- MeSH terms
- Calorimetry, Differential Scanning, Kinetics, Microscopy, Electron, Scanning, Polyesters, Glycine max, Stress, Mechanical, Thermodynamics, Soybean Proteins
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.