Plasticization of Poly(l-lactide) with Poly(propylene glycol)
The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
A new plasticizer for poly(L-lactide) (PLA)-poly(propylene glycol) (PPG) is proposed. The advantage of using PPG is that it does not crystallize, has low glass transition temperature, and is miscible with PLA. PLA was plasticized with PPGs with nominal Mw of 425 and 1000 g/mol. Poly(ethylene glycol) (PEG), long known as a plasticizer for PLA, with nominal Mw of 600 g/mol, was also used to plasticize PLA for comparison. The thermal and tensile properties of PLA and PLA with 5-12.5 wt % of the plasticizers were studied. In blends of PLA with PPGs the glass transition temperature was lower than that of neat PLA. Both PPGs enhanced the crystallizability of PLA albeit less than PEG. All of the plasticizers increased also the ability of PLA to plastic deformation which was reflected in a decrease of yield stress and in an increase of elongation at break. The effect was enhanced by the higher PPG content and also by lower molecular weight of PPG. A phase separation occurred only in the blend containing 12.5 wt % of PPG with higher molecular weight. The evidences of crazing were found in deformed samples of PLA with low plasticizer content, whereas the samples with higher content of plasticizers crystallized due to deformation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Thermal characterization of polymeric materials
(1997) · Choice Reviews Online · doi:10.5860/choice.35-0290 · Cited by 657
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Mechanism of the Stereocomplex Formation between Enantiomeric Poly(lactide)s
Brizzolara, D., Cantow, H.-J., Diederichs, K., Keller, E., & Domb, A. J. (1996) · Macromolecules · doi:10.1021/ma951144e · Cited by 547
Crystallization, structure and properties of plasticized poly(l-lactide)
Kulinski, Z., & Piorkowska, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.101 · Cited by 540
Self-citationPlasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Concise polymeric materials encyclopedia
(1999) · Choice Reviews Online · doi:10.5860/choice.36-3664 · Cited by 494
Nijenhuis, A. J., Colstee, E., Grijpma, D. W., & Pennings, A. J. (1996) · Polymer · doi:10.1016/s0032-3861(96)00455-7 · Cited by 479
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
Research works printed but not linked: 2
- Pluta M., 2006, Part B: Polym. Phys
- Cyras V. P., 1999, Polym. Intern., 48, 705, 10.1002/(SICI)1097-0126(199908)48:8<705::AID-PI205>3.0.CO;2-P · doi:10.1002/(sici)1097-0126(199908)48:8<705::aid-pi205>3.0.co;2-p
Cited by
Items 101–200 of 321
Abbott, S. J. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch7 · Cited by 49
Tailoring and Long-Term Preservation of the Properties of PLA Composites with “Green” Plasticizers
Murariu, M., Paint, Y., Murariu, O., Laoutid, F., & Dúbois, P. (2022) · Polymers · doi:10.3390/polym14224836 · Cited by 45
Electrospun polylactide/poly(ethylene glycol) hybrid fibrous scaffolds for tissue engineering
Wang, B., Fu, S., Ni, P., Peng, J., Zheng, L., Luo, F., Liu, H., & Qian, Z. (2011) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.33264 · Cited by 52
Hu, X., Li, Y., Li, M., Kang, H., & Zhang, L. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02159 · Cited by 44
Pongwisuthiruchte, A., Dubas, S. T., Aumnate, C., & Potiyaraj, P. (2022) · Scientific Reports · doi:10.1038/s41598-022-24667-8 · Cited by 42
Tunable and Durable Toughening of Polylactide Materials Via Reactive Extrusion
Kfoury, G., Hassouna, F., Raquez, J., Toniazzo, V., Ruch, D., & Dubois, P. (2014) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300265 · Cited by 41
Wang, R., Wan, C., Wang, S., & Zhang, Y. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21490 · Cited by 45
Rheology, Mechanical Properties, and Barrier Properties of Poly(lactic acid)
Domenek, S., Nassar, S. F., & Ducruet, V. (2017) · Advances in polymer science · doi:10.1007/12_2016_17 · Cited by 46
Toughening of polylactide by blending with a novel random aliphatic–aromatic copolyester
Kowalczyk, M., Piórkowska, E., Dutkiewicz, S., & Sowiński, P. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.07.002 · Cited by 44
Rheological, Thermal, and Degradation Properties of PLA/PPG Blends
Xie, D. H., Zhao, Y. L., Li, Y., LaChance, A. M., Lai, J., Sun, L., & Chen, J. (2019) · Materials · doi:10.3390/ma12213519 · Cited by 44
Wu, D., Guo, Y., Huang, A. P., Xu, R., & Liu, P. (2020) · Polymer Bulletin · doi:10.1007/s00289-020-03379-x · Cited by 44
Biodegradable blends of poly(L‐lactide) and starch
Kozlowski, M., Masirek, R., Piorkowska, E., & Gazicki‐Lipman, M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26088 · Cited by 40
Valerio, O., Misra, M., & Mohanty, A. K. (2017) · RSC Advances · doi:10.1039/c7ra06612k · Cited by 46
Xie, L., Xu, H., Wang, Z.-P., Li, X., Chen, J.-B., Zhang, Z., Yin, H., Zhong, G., Lei, J., & Li, Z. (2014) · Journal of Polymer Research · doi:10.1007/s10965-014-0357-z · Cited by 42
Takhulee, A., Takahashi, Y., & Vao‐soongnern, V. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-1174-3 · Cited by 42
Yi, L., Luo, S., Shen, J., Guo, S., & Sue, H. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02738 · Cited by 41
Baimark, Y., Rungseesantivanon, W., & Prakymoramas, N. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.028 · Cited by 40
Jeong, H., Yuk, J. S., Lee, H., Kang, S., Park, H., Park, S. H., & Shin, J. (2021) · Green Chemistry · doi:10.1039/d1gc02049h · Cited by 41
Xiao, H., Liu, F., Jiang, T., & Yeh, J. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32225 · Cited by 43
Kfoury, G., Raquez, J., Hassouna, F., Leclère, P. E. L. G., Toniazzo, V., Ruch, D., & Dúbois, P. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24085 · Cited by 44
Yun, X., Li, X., Jin, Y., Sun, W., & Dong, T. (2018) · Polymer Science Series A · doi:10.1134/s0965545x18020141 · Cited by 38
Gu, L., Nessim, E. E., Li, T., & Macosko, C. W. (2018) · Polymer · doi:10.1016/j.polymer.2018.09.027 · Cited by 39
Sun, Z., Wang, L., Zhou, J., Fan, X., Xie, H., Zhang, H., Zhang, G., & Shi, X. (2020) · Polymers · doi:10.3390/polym12102362 · Cited by 38
Castro López, M. D. M., López de Dicastillo, C., López Vilariño, J. M., & González Rodríguez, M. V. (2013) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf402670a · Cited by 36
Characteristics and Applications of PLA
Domenek, S., & Ducruet, V. (2016) · Wiley eBooks · doi:10.1002/9781119117360.ch6 · Cited by 40
Mascia, L., Su, R., Clarke, J., Lou, Y., & Mele, E. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.12.033 · Cited by 35
Jia, Z., Tan, J., Han, C., Yang, Y., & Dong, L. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30638 · Cited by 43
Novel blends of polylactide with ethylene glycol derivatives of POSS
Zubrowska, A., Piórkowska, E., Kowalewska, A., & Cichorek, M. (2014) · Colloid & Polymer Science · doi:10.1007/s00396-014-3344-3 · Cited by 34
Plasticization of polylactide with block copolymers of ethylene glycol and propylene glycol
Kowalczyk, M., Pluta, M., Piórkowska, E., & Krasnikova, N. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36563 · Cited by 40
Supercritical CO2: A Clean and Low Temperature Approach to Blending PDLLA and PEG
Kelly, C. A., Naylor, A., Illum, L., Shakesheff, K. M., & Howdle, S. M. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101889 · Cited by 38
Microporous Structure and Drug Release Kinetics of Polymeric Nanoparticles
Sant, S., Thommes, M., & Hildgen, P. (2007) · Langmuir · doi:10.1021/la702244w · Cited by 38
Quality evaluation of hot peppers stored in biodegradable poly(lactic acid)-based active packaging
Qin, Y., Zhuang, Y., Wu, Y. J., & Li, L. (2016) · Scientia Horticulturae · doi:10.1016/j.scienta.2016.02.003 · Cited by 32
Kassouf, A., Ruellan, A., Bouveresse, D. J., Rutledge, D. N., Domenek, S., Maalouly, J., Chébib, H., & Ducruet, V. (2015) · Talanta · doi:10.1016/j.talanta.2015.10.021 · Cited by 34
Wu, J., Zou, X., Jing, B., & Dai, W. (2014) · Polymer Engineering and Science · doi:10.1002/pen.23981 · Cited by 30
Tsujimoto, T., Haza, Y., Yin, Y., & Uyama, H. (2011) · Polymer Journal · doi:10.1038/pj.2011.3 · Cited by 32
Park, J. Y., Hwang, S. Y., Yoon, W. J., Yoo, E.-S., & Im, S. S. (2012) · Macromolecular Research · doi:10.1007/s13233-012-0203-2 · Cited by 31
Poly(lactic acid) plasticized by biodegradable glyceryl lactate
Yuan, Y., Hu, Z., Fu, X., Jiang, L., Xiao, Y., Hu, K., Yan, P., & Lei, J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43460 · Cited by 35
Characteristics and Applications of Poly(lactide)
Domenek, S., Courgneau, C., & Ducruet, V. (2011) · Wiley eBooks · doi:10.1002/9781118164792.ch8 · Cited by 40
Choi, K., Lim, S.-W., Choi, M., Kim, Y., Han, D.-H., & Ha, C. (2014) · Polymer Bulletin · doi:10.1007/s00289-014-1251-x · Cited by 31
Chaos, A., Sangroniz, A., Fernández, J., del Río, J., Iriarte, M., Sarasua, J.-R., & Etxeberria, A. (2019) · Journal of Applied Polymer Science · doi:10.1002/app.48868 · Cited by 29
Safari, M., Kasmi, N., Pisani, C., Berthé, V., Müller, A. J., & Habibi, Y. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.06.056 · Cited by 30
Non‐isothermal crystallization kinetics of PEG plasticized PLA/G‐POSS nanocomposites
Kodal, M., Şirin, H., & Özkoç, G. (2015) · Polymer Composites · doi:10.1002/pc.23704 · Cited by 31
Byrne, F., Ward, P. G., Kennedy, J. E., Imaz, N., Hughes, D. J., & Dowling, D. P. (2009) · Journal of Polymers and the Environment · doi:10.1007/s10924-009-0119-x · Cited by 30
Shi, X., Wang, L., Kang, Y., Qin, J., Li, J., Zhang, H., Fan, X., Liu, Y., & Zhang, G. (2018) · Journal of Polymer Research · doi:10.1007/s10965-018-1620-5 · Cited by 28
Pluta, M., & Piórkowska, E. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.11.011 · Cited by 28
Solubility factors as screening tools of biodegradable toughening agents of polylactide
Ruellan, A., Guinault, A., Sollogoub, C., Ducruet, V., & Domenek, S. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42476 · Cited by 37
Ru, J., Yang, S.-G., Lei, J., & Li, Z. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b02241 · Cited by 28
Jariyasakoolroj, P., Rojanaton, N., & Jarupan, L. (2019) · Polymer Bulletin · doi:10.1007/s00289-019-02862-4 · Cited by 34
Properties of poly(ethylene glycol)-grafted poly(lactic acid) plasticized with poly(ethylene glycol)
Choi, K., Lim, S.-W., Choi, M., Han, D.-H., & Ha, C. (2014) · Macromolecular Research · doi:10.1007/s13233-014-2182-y · Cited by 27
Polylactic Acid/Carbon Nanoparticle Composite Filaments for Sensing
da Silva, M. M., Lopes, P. E., Li, Y., Pötschke, P., Ferreira, F., & Paiva, M. C. (2021) · Applied Sciences · doi:10.3390/app11062580 · Cited by 27
Ran, X., Jia, Z., Han, C., Yang, Y., & Dong, L. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.31701 · Cited by 27
Huang, H., Chen, L., Song, G., & Tang, G. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46669 · Cited by 26
Tunable polylactide plasticizer design: Rigid stereoisomers
Xuan, W., Odelius, K., & Hakkarainen, M. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110649 · Cited by 26
Tailoring Oligomeric Plasticizers for Polylactide through Structural Control
Xuan, W., Odelius, K., & Hakkarainen, M. (2022) · ACS Omega · doi:10.1021/acsomega.2c01160 · Cited by 27
Fiber association and network formation in PLA/lignocellulosic fiber composites
Faludi, G., Hári, J., Renner, K. E., Móczó, J., & Pukánszky, B. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.01.006 · Cited by 34
El‐Hadi, A. M. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23676 · Cited by 27
Cold Crystallization of Glassy Polylactide during Solvent Crazing
Трофимчук, Е. С., Efimov, A. V., Grokhovskaya, T. E., Никонорова, Н. И., Moskvina, M. A., Sedush, N. G., Дороватовский, П. В., Ivanova, O. A., Rukhlya, E. G., Volynskii, A. L., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09666 · Cited by 27
Niu, M., Wang, H., Li, J., Chen, H., Li, L., Yang, H., Liu, X., Chen, Z., Liu, H., & Chen, J. (2020) · Royal Society Open Science · doi:10.1098/rsos.192154 · Cited by 25
Chen, C., He, B., Wang, S., Yuan, G., & Zhang, L. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.12.012 · Cited by 25
Kong, J., Li, Y., Bai, Y., Li, Z., Cao, Z., Yu, Y., Han, C., & Dong, L. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.01.153 · Cited by 26
Supertough and Transparent Poly(lactic acid) Nanostructure Blends with Minimal Stiffness Loss
Li, Z., Shi, S., Yang, F., Cao, D., Zhang, K., Wang, B., Ma, Z., Pan, L., & Li, Y. (2020) · ACS Omega · doi:10.1021/acsomega.0c01165 · Cited by 25
Bao, R., Jiang, W., Liu, Z., Yang, W. M., Xie, B., & Yang, M. (2015) · RSC Advances · doi:10.1039/c5ra02575c · Cited by 28
Detyothin, S., Kathuria, A., Jaruwattanayon, W., Selke, S. E. M., & Auras, R. A. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch16 · Cited by 31
Thermal, rheological, and mechanical properties of polylactide/poly(diethylene glycol adipate)
Liang, H., Hao, Y., Liu, S., Zhang, H., Li, Y., Dong, L., & Zhang, H. (2013) · Polymer Bulletin · doi:10.1007/s00289-013-1035-8 · Cited by 26
Lorenzo, M. L. D., & Longo, A. (2019) · Thermochimica Acta · doi:10.1016/j.tca.2019.02.004 · Cited by 24
Hou, B., Shan, X., Yin, H., Shen, J., Wang, Q., Fang, J., & Li, J. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.152186 · Cited by 24
Qiu, Z., & Zhou, P. (2014) · RSC Advances · doi:10.1039/c4ra08827a · Cited by 24
High performance poly (lactic acid)/bio-polyamide11 through controlled chain mobility
Heshmati, V., & Favis, B. D. (2017) · Polymer · doi:10.1016/j.polymer.2017.07.009 · Cited by 27
Baimark, Y., & Srisuwan, Y. (2019) · Journal of Elastomers & Plastics · doi:10.1177/0095244319827993 · Cited by 26
Li, R., Wu, L., & Li, B.-G. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b05046 · Cited by 23
de Dicastillo, C. L., Ares‐Pernas, A., López, M. D. M. C., Vilariño, J. M. L., & González-Rodríguez, M. V. (2013) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf404283q · Cited by 23
Plasticization of poly(lactic acid) using different molecular weight of Poly(ethylene glycol)
Septevani, A. A., & Bhakri, S. (2017) · AIP conference proceedings · doi:10.1063/1.5011895 · Cited by 23
Availability of PLA/SIS blends for packaging and medical applications
Luchian, A. M., Zaharescu, T., Lungulescu, E.-M., Râpă, M., & Iovu, H. (2020) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2020.108696 · Cited by 26
Chu, W., Chiang, S.-F., Li, J., & Kuo, S. (2013) · Materials · doi:10.3390/ma6115077 · Cited by 23
Li, W., Sun, Q., Mu, B., Luo, G., Xu, H., & Yang, Y. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.098 · Cited by 23
Zhang, Z., Wang, X., Wang, Y., Shen, C., Liu, C., & Wang, Z. (2020) · Polymer · doi:10.1016/j.polymer.2020.122875 · Cited by 23
Effects of electron radiation on properties of PLA
Malinowski, R., Rytlewski, P., & Zenkiewicz, M. (2011) · Archives of Materials Science and Engineering · Cited by 23
Role of the plasticizers on the crystallization of PLA and its composites with mesoporous MCM-41
Blázquez‐Blázquez, E., Barranco‐García, R., Díez‐Rodríguez, T. M., Cerrada, M. L., & Pérez, E. (2024) · Journal of Materials Science · doi:10.1007/s10853-024-09556-x · Cited by 25
Industrial vegetable oil by-products increase the ductility of polylactide
Ruellan, A., Guinault, A., Sollogoub, C., Chollet, G., Ait-Mada, A., Ducruet, V., & Domenek, S. (2015) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2015.98 · Cited by 26
Swain, R., Moharana, A., Habibullah, S., Nandi, S., Bose, A., Mohapatra, S., & Mallick, S. (2023) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2023.123153 · Cited by 22
Belletti, G., Ronconi, G., Mazzanti, V., Buratti, E., Marchi, L., Sotgiu, G., Calosi, M., Mollica, F., & Bertoldo, M. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300237 · Cited by 22
Zhao, X., Li, P., Fan, M., Zhang, Y., Huang, Z., Yu, J., Zhou, L., Bi, S., & Peng, S. (2024) · RSC Advances · doi:10.1039/d4ra00757c · Cited by 22
Bioprocessing of Glycerol into Glyceric Acid for Use in Bioplastic Monomer
Fukuoka, T., Habe, H., Kitamoto, D., & Sakaki, K. (2011) · Journal of Oleo Science · doi:10.5650/jos.60.369 · Cited by 22
Yi, L., Yang, X., Li, D., Shen, J., Guo, S., & Sue, H. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00221 · Cited by 23
Study of the Properties of Plasticised Poly(Lactic Acid) with Poly(1,3-Butylene Adipate)
Ning, W., Xingxiang, Z., Jiugao, Y., & Jianming, F. (2008) · Polymers and Polymer Composites · doi:10.1177/096739110801600903 · Cited by 28
Effect of High Pressure Treatment on Poly(lactic acid)/Nano–TiO2 Composite Films
Chi, H., Li, W., Fan, C., Zhang, C., Li, L., Qin, Y., & Yuan, M. (2018) · Molecules · doi:10.3390/molecules23102621 · Cited by 22
Feng, X., Zhang, S., Zhu, S., Han, K., Jiao, M., Song, J., Ma, Y., & Yu, M. (2013) · RSC Advances · doi:10.1039/c3ra40899j · Cited by 21
Wei, T., Pang, S., Xu, N., Pan, L., Zhang, Z., Xu, R., Ma, N., & Lin, Q. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41308 · Cited by 21
Crystallization behavior and mechanical properties of crosslinked plasticized poly( L ‐lactic acid)
Jia, Z., Zhang, K., Tan, J., Han, C., Dong, L., & Yang, Y. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29171 · Cited by 25
Addition of α‐tocopherol on poly(lactic acid): Thermal, mechanical, and sorption properties
Gonçalves, C. M. B., Tomé, L. C., Coutinho, J. A. P., & Marrucho, I. M. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32952 · Cited by 25
A coarse-grained model for polylactide: glass transition temperature and conformational properties
Prasitnok, K. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-1037-y · Cited by 21
Preparation and characterization of poly(lactic acid) with adipate ester added as a plasticizer
Tsou, C., Gao, C., Guzman, M. D., Wu, D., Hung, W., Yuan, L., Suen, M., & Yeh, J. (2018) · Polymers and Polymer Composites · doi:10.1177/0967391118809210 · Cited by 21
Stability of lysozyme incorporated into electrospun fibrous mats for wound healing
Liu, X., Nielsen, L. H., Qu, H., Christensen, L. P., Rantanen, J., & Yang, M. (2019) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2019.01.003 · Cited by 21
Polyethylene oxide enhances the ductility and toughness of polylactic acid: the role of mesophase
Wang, Z., Zhang, C., Zhang, Z., Chen, X., Wang, X., Wen, M., Chen, B., Cao, W., & Liu, C. (2020) · Soft Matter · doi:10.1039/d0sm00671h · Cited by 20
Blázquez‐Blázquez, E., Barranco‐García, R., Díez‐Rodríguez, T. M., Cerrada, M. L., & Pérez, E. (2023) · Polymers · doi:10.3390/polym15030624 · Cited by 20
Ayan, U., Nouranian, S., Majdoub, M., Al‐Ostaz, A., Ucak‐Astarlioglu, M. G., & Villacorta, B. S. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c06452 · Cited by 22
Pressure-sensitive adhesives based on tung oil
Li, A., & Li, K. (2015) · RSC Advances · doi:10.1039/c5ra15144a · Cited by 19
Lightweight micro-cellular plastics from polylactide/polyolefin hybrids
Xu, Y., Delgado, P., Todd, A. D., Loi, J., Saba, S. A., McEneany, R. J., Tower, T., Topolkaraev, V. A., Macosko, C. W., & Hillmyer, M. A. (2016) · Polymer · doi:10.1016/j.polymer.2016.08.102 · Cited by 19
Mechanical Properties of Poly(lactic Acid)
Sin, L. T., Rahmat, A. R., & Rahman, W. A. W. A. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4377-4459-0.00005-6 · Cited by 27
Cui, L., Wang, Y., Guo, Y., Liu, Y., Zhao, J., Zhang, C., & Zhu, P. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3795 · Cited by 20
Metadata
- Authors
- Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M.
- Affiliations
- Centrum Badań Molekularnych i Makromolekularnych Polskiej Akademii Nauk (PL)
- Centre of Molecular and Macromolecular Studies, Polish Academy of Sciences, 90 363 Lodz, Poland
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-06-06
- Volume
- 7
- Issue
- 7
- Pages
- 2128-2135
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2088024029
- Cited by
- 320
- References
- 25
- Citations by year
- 2026: 7 · 2025: 12 · 2024: 15 · 2023: 14 · 2022: 12 · 2021: 13 · 2020: 19 · 2019: 15 · 2018: 19 · 2017: 29 · 2016: 26 · 2015: 20 · 2014: 27 · 2013: 18 · 2012: 15
- FWCI
- 5.14
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- poly(L-lactic acid), polypropylene glycol, plasticizers, polyethylene glycol, polymer blends, glass transition temperature, crystallization, tensile properties, yield stress, elongation at break, phase separation, crazing, molecular weight effects
- MeSH terms
- Calorimetry, Differential Scanning, Hot Temperature, Microscopy, Electron, Scanning, Microscopy, Polarization, Plastics, Polyesters, Tensile Strength, Propylene Glycol
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.