Plasticization of Poly(l-lactide) with Poly(propylene glycol)
The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
A new plasticizer for poly(L-lactide) (PLA)-poly(propylene glycol) (PPG) is proposed. The advantage of using PPG is that it does not crystallize, has low glass transition temperature, and is miscible with PLA. PLA was plasticized with PPGs with nominal Mw of 425 and 1000 g/mol. Poly(ethylene glycol) (PEG), long known as a plasticizer for PLA, with nominal Mw of 600 g/mol, was also used to plasticize PLA for comparison. The thermal and tensile properties of PLA and PLA with 5-12.5 wt % of the plasticizers were studied. In blends of PLA with PPGs the glass transition temperature was lower than that of neat PLA. Both PPGs enhanced the crystallizability of PLA albeit less than PEG. All of the plasticizers increased also the ability of PLA to plastic deformation which was reflected in a decrease of yield stress and in an increase of elongation at break. The effect was enhanced by the higher PPG content and also by lower molecular weight of PPG. A phase separation occurred only in the blend containing 12.5 wt % of PPG with higher molecular weight. The evidences of crazing were found in deformed samples of PLA with low plasticizer content, whereas the samples with higher content of plasticizers crystallized due to deformation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Thermal characterization of polymeric materials
(1997) · Choice Reviews Online · doi:10.5860/choice.35-0290 · Cited by 657
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Mechanism of the Stereocomplex Formation between Enantiomeric Poly(lactide)s
Brizzolara, D., Cantow, H.-J., Diederichs, K., Keller, E., & Domb, A. J. (1996) · Macromolecules · doi:10.1021/ma951144e · Cited by 547
Crystallization, structure and properties of plasticized poly(l-lactide)
Kulinski, Z., & Piorkowska, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.101 · Cited by 540
Self-citationPlasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Concise polymeric materials encyclopedia
(1999) · Choice Reviews Online · doi:10.5860/choice.36-3664 · Cited by 494
Nijenhuis, A. J., Colstee, E., Grijpma, D. W., & Pennings, A. J. (1996) · Polymer · doi:10.1016/s0032-3861(96)00455-7 · Cited by 479
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
Research works printed but not linked: 2
- Pluta M., 2006, Part B: Polym. Phys
- Cyras V. P., 1999, Polym. Intern., 48, 705, 10.1002/(SICI)1097-0126(199908)48:8<705::AID-PI205>3.0.CO;2-P · doi:10.1002/(sici)1097-0126(199908)48:8<705::aid-pi205>3.0.co;2-p
Cited by
Items 201–300 of 321
Sawalha, H., Schroën, K. G. P. H., & Boom, R. M. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21557 · Cited by 22
Lee, D., Lee, S. H., Cho, M. S., Nam, J. D., & Lee, Y. (2015) · Polymer International · doi:10.1002/pi.4848 · Cited by 18
A short banana fiber— PLA filament for 3D printing: Development and characterization
Mohamed Shafeer, P. P., Pitchaimani, J., & Doddamani, M. R. (2024) · Polymer Composites · doi:10.1002/pc.28519 · Cited by 23
Advanced Design Concepts for Shape-Memory Polymers in Biomedical Applications and Soft Robotics
Fetisova, A. A., Surmeneva, M. A., & Анатольевич, С. Р. (2026) · Polymers · doi:10.3390/polym18020214 · Cited by 18
Ahmed, J., Arfat, Y. A., Castro‐Aguirre, E., & Auras, R. A. (2016) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-016-5402-1 · Cited by 18
Jia, S., Han, L., Chen, Y., Pan, H., Wang, X., Zhang, H., Dong, L., & Zhang, H. (2022) · Polymer · doi:10.1016/j.polymer.2022.125143 · Cited by 20
Feng, L., Bian, X., Cui, Y., Chen, Z., Li, G., & Chen, X. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200696 · Cited by 18
Novel environmentally sustainable xylitol-based plasticizer: synthesis and application
Hou, B., Ren, L., Fu, D., Jiang, Y., Zhang, M. Y., & Zhang, H. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02694-9 · Cited by 19
Liu, J., Huang, M., Tao, J.-R., Weng, Y., & Wang, M. (2021) · Polymer · doi:10.1016/j.polymer.2021.124121 · Cited by 17
Qin, Y., Wang, Y., Wu, Y. Q., Zhang, Y., Li, H., & Yuan, M. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0702-7 · Cited by 17
Lai, S., Chen, J., Han, J. L., Yu, Y., & Lai, H. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39183 · Cited by 17
Ethylene vinyl acetate (EVA)/poly(lactic acid) (PLA) blends and their foams
Han, D.-H., Choi, M., Nagappan, S., Kim, Y., & Kim, H. (2020) · Molecular Crystals and Liquid Crystals · doi:10.1080/15421406.2020.1743453 · Cited by 16
Shepherd, L. M., Drufva, E. E., & Frey, M. W. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41030 · Cited by 18
Reactive plasticization of poly(lactide) with epoxy functionalized cardanol
Mihai, I., Hassouna, F., Fouquet, T., Laachachi, A., Raquez, J., Ahrach, H. I. E., & Dúbois, P. (2017) · Polymer Engineering and Science · doi:10.1002/pen.24647 · Cited by 17
Poly (l-lactide)/PEG-mb-PBAT blends with highly improved toughness and balanced performance
Li, R., Wu, L., & Li, B. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.01.037 · Cited by 17
He, X., Tang, L., Zheng, J. B., Jin, Y., Chang, R., Yu, X., Song, Y., & Huang, R. (2023) · Polymers · doi:10.3390/polym15143000 · Cited by 15
Yu, W., Hu, Z., Zhang, Y., Zhang, Y., Dong, W., Li, X., & Wang, S. (2023) · Polymers · doi:10.3390/polym15193992 · Cited by 17
Salak, F., Uemura, S., & Sugimoto, K. (2014) · Polymer Engineering and Science · doi:10.1002/pen.23909 · Cited by 16
Li, Z., Song, S., Zhao, X., Lv, X., & Sun, S. (2017) · Materials · doi:10.3390/ma10080957 · Cited by 16
Sun, Z., Xu, S., Zhang, B., Zhong, J., Dai, K., Zheng, G., Liu, C., & Shen, C. (2024) · Polymer · doi:10.1016/j.polymer.2024.126788 · Cited by 14
Properties and weldability of plasticized polylactic acid films
Stoehr, N., Baudrit, B., Haberstroh, E., Nase, M., Heidemeyer, P., & Bastian, M. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.40394 · Cited by 16
Lim, S.-W., Choi, M., Jeong, J., Park, E.-Y., & Ha, C. (2016) · Composite Interfaces · doi:10.1080/09276440.2016.1175168 · Cited by 14
Thermal and strain-induced phase separation in an ionic liquid plasticized polylactide
Peng, N., Lv, R., Jin, T., Na, B., Liu, H., & Zhou, H. (2016) · Polymer · doi:10.1016/j.polymer.2016.12.024 · Cited by 14
Plasticization of Poly‐ L ‐lactide with L ‐lactide, D ‐lactide, and D , L ‐lactide monomers
López‐Rodríguez, N., & Sarasua, J.-R. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23469 · Cited by 19
Guo, X. Q., Song, L. X., Dang, Z., & Du, F. Y. (2009) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.82.1209 · Cited by 14
Luo, F., Li, J., Fan, J., Weng, Y., & Ren, J. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03739-1 · Cited by 15
Zhijun, Q., Xingxiang, Z., Ning, W., & Jianming, F. (2008) · Polymer Composites · doi:10.1002/pc.20730 · Cited by 13
Wischke, C., Tripodo, G., Choi, N. ‐., & Lendlein, A. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100226 · Cited by 15
Wang, K., Brüster, B., Addiego, F., Kfoury, G., Hassouna, F., Ruch, D., Raquez, J., & Dúbois, P. (2015) · Polymer International · doi:10.1002/pi.4927 · Cited by 14
Fan, J., Chu, Z., Li, L., Zhao, T., Yin, M., & Qin, Y. (2017) · Molecules · doi:10.3390/molecules22030500 · Cited by 13
He, X., & Qiu, Z. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.03.038 · Cited by 14
Li, J., & Qiu, Z. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b03136 · Cited by 13
Andrzejewski, J., & Michałowski, S. (2022) · Polymers · doi:10.3390/polym14194086 · Cited by 12
Miranda-Pinzon, M., Gómez-Caturla, J., Martínez, J. I., Guijarro, N., Marset, X., & Balart, R. (2025) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5c01601 · Cited by 12
Design high heat‐resistant stereocomplex poly(lactide acid) by cross‐linking and plasticizing
Cui, L., Wang, Y., Zhang, R., & Liu, Y. (2017) · Advances in Polymer Technology · doi:10.1002/adv.21917 · Cited by 12
He, X., & Qiu, Z. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.11.010 · Cited by 13
Preparation and properties of poly(lactic acid)/lipophilized graphene oxide nanohybrids
Jeong, J., Choi, M., Nagappan, S., Lee, W., & Ha, C. (2017) · Polymer International · doi:10.1002/pi.5478 · Cited by 12
Lai, W., & Liu, L. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5844 · Cited by 11
Synthesis and Hydrophilic Performance of Poly(Lactic Acid)-Poly(Ethylene Glycol) Block Copolymers
Xu, G., Chen, S., Yan, X. C., Yang, C., & Chen, Z. (2016) · American Journal of Analytical Chemistry · doi:10.4236/ajac.2016.73028 · Cited by 13
Duval, C., Rahouadj, R., Nouvel, C., & Six, J. (2017) · International Journal of Polymeric Materials · doi:10.1080/00914037.2017.1354197 · Cited by 12
Recyclable Covalent Adaptable Polystyrene Networks Using Boronates and TetraAzaADamantanes
van Hurne, S., Raut, S. K., & Smulders, M. M. J. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c01633 · Cited by 10
Li, L., Sun, Y., Yuan, Z., Tan, Q., Ren, J., & Li, J. (2024) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2024.106070 · Cited by 11
Xu, M., Sun, W., Li, C., Li, J., Tan, J., & Zhu, X. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141428 · Cited by 10
Li, X., Wang, X., Liu, Y., Zhang, X., Huang, J., Li, T., Wang, Y., Wang, S., & Dong, W. (2025) · Polymer · doi:10.1016/j.polymer.2025.128588 · Cited by 10
Hernández, B. R., & Lieske, A. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300309 · Cited by 10
Mohamed, E.-H. A. (2011) · Materials Sciences and Applications · doi:10.4236/msa.2011.25058 · Cited by 10
Sara, M., Rouissi, T., Brar, S. K., & Blais, J.-F. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-802980-0.00005-5 · Cited by 12
Melt compounding and characterization of poly(lactide) stereocomplex/natural rubber composites
Pholharn, D., Srithep, Y., & Morris, J. M. (2017) · Polymer Engineering and Science · doi:10.1002/pen.24603 · Cited by 10
Improvement of mechanical properties of polylactide by equal channel multiple angular extrusion
Vozniak, I., Beloshenko, V. A., Савченко, Б., & Voznyak, A. V. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49720 · Cited by 10
Kubiak, N., Sztorch, B., Kustosz, M., Frydrych, M., Pakuła, D., Jałbrzykowski, M., Hartmann, T., Zopp, C., Kroll, L., & Przekop, R. E. (2025) · Materials · doi:10.3390/ma18173952 · Cited by 10
Cui, L., Zhang, R., Wang, Y., Zhang, C., & Guo, Y. (2017) · Wuhan University Journal of Natural Sciences · doi:10.1007/s11859-017-1267-9 · Cited by 10
Zou, S., Na, B., Lv, R., & Pan, H. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34658 · Cited by 9
Guo, B., Lou, J., Kuang, T., Wang, Y., Zhang, K., Qin, J., He, M., Liu, Y., & Gong, Y. (2025) · RSC Advances · doi:10.1039/d5ra01209k · Cited by 8
Li, J., Zhao, Y., Jiang, Z., & Qiu, Z. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.12.001 · Cited by 8
Nonisothermal crystallization of poly(L‐lactic acid) promoted by polyols
Yang, B., Wang, H., Wan, X., Fan, B., & Sun, H. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6038 · Cited by 8
Wan, T., Yang, G., Du, T., & Zhang, J. (2014) · Polymer Engineering and Science · doi:10.1002/pen.23886 · Cited by 8
THERMAL-MECHANICAL PROPERTIES AND RHEOLOGICAL BEHAVIORS OF POLYLACTIDE/POLY(ETHYLENE OXIDE) BLENDS
Jia, Z., Han, C., Dong, L., & Yang, Y. (2009) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2009.00967 · Cited by 8
Yang, D., Lu, Q., Fan, Z., Li, S., Tu, J., & Wang, W. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.31336 · Cited by 8
Mechanical Properties of Poly(Lactic Acid)
Sin, L. T., & Tueen, B. S. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-814472-5.00005-4 · Cited by 9
Mecheri, N., Benounis, M., & Barhoumi, H. (2017) · Sensor Review · doi:10.1108/sr-01-2017-0020 · Cited by 8
Effect of Nanocalcium Carbonate Content on the Properties of PLA Nanocomposites
Pundir, A., Krishnan, P. S. G., & Nayak, S. K. (2017) · Journal of Composites and Biodegradable Polymers · doi:10.12974/2311-8717.2017.05.01.4 · Cited by 10
Exploring the impact of material selection on the efficacy of hot-melt extrusion
Kapoor, D. U., Vaishnav, D. J., Garg, R., Saini, P. K., Prajapati, B. G., Castro, G. R., Suttiruengwong, S., Limmatvapirat, S., & Sriamornsak, P. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124966 · Cited by 7
Highly conductive, stretchable block copolymer based elastomeric networks for lithium ion batteries
Narute, S., Angel, J. M., & Kyu, T. (2023) · Electrochimica Acta · doi:10.1016/j.electacta.2023.141962 · Cited by 7
Wu, N., Wang, H., Ding, M., Man, L., & Zhang, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37989 · Cited by 7
Duan, K., & Zhen, W. (2019) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2019.1587768 · Cited by 9
Liquid–liquid equilibria of polyrotaxane and poly(vinyl alcohol)
Kataoka, T., Nagao, Y., Kidowaki, M., Araki, J., & Ito, K. (2006) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2006.11.022 · Cited by 7
Cutillas, A. M., Sanz‐Serrano, D., Oh, S., Ventura, F., & de Ilarduya, A. M. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300066 · Cited by 6
Aouissi, T., Hellati, A., Zerriouh, A., Cavallo, D., Kabache, F., Benayache, W., Benaniba, M. T., & Benguerba, Y. (2025) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202500137 · Cited by 6
Yu, Q., Zhang, G., Shi, X., Jing, Z., Kang, Y., & Jiang, L. (2016) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2016.1254516 · Cited by 6
Wang, B., Zheng, Q., Li, M., Wang, S., Xiao, S., Li, X., & Liu, H. (2022) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2022.39 · Cited by 6
Synthesis and Characterisation of PLA-CO-PEG Copolymers
Thanomsilp, C., & Phetthianchai, U. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.506.178 · Cited by 6
Jiang, Z., Chang, Y. F., & Chen, Z. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45299 · Cited by 6
Pholharn, D., Cheerarot, O., & Baimark, Y. (2017) · Chinese Journal of Polymer Science · doi:10.1007/s10118-017-1989-3 · Cited by 6
Assem, Y., Mohamed, H. A., Said, R., & El‐Masry, A. M. (2018) · Pigment & Resin Technology · doi:10.1108/prt-02-2017-0020 · Cited by 6
Effect of Processing Method on Thermal Behavior in PLA/PEG Melt Blending
Hashim, N., Retenam, K., Somderam, S., & Yusoh, K. (2015) · Advanced materials research · doi:10.4028/www.scientific.net/amr.1134.185 · Cited by 8
Li, Y., Fang, H., Zhang, D., Bahader, A., Zhen, B., Xu, P. Y., & Ding, Y. (2016) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-016-5481-z · Cited by 6
Wang, L., Zhang, J., Yun, X., Hu, J. S., Lu, H., & Dong, T. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126216 · Cited by 5
Du, F., Erdmann, R., Petzold, A., Wutzler, A., Leuteritz, A., Nase, M., & Androsch, R. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14112381 · Cited by 5
Mahmoud, N. H. M., Takagi, H., Shimizu, N., Igarashi, N., & Sakurai, S. (2024) · Polymer Journal · doi:10.1038/s41428-024-00919-4 · Cited by 7
Wischke, C., Löbler, M., Neffe, A. T., Hanh, B. D., Zierke, M., Sternberg, K., Schmitz, K., Guthoff, R. F., & Lendlein, A. (2011) · Macromolecular Symposia · doi:10.1002/masy.201100050 · Cited by 5
Baimark, Y., Pasee, S., Rungseesan, W., & Prakymoram, N. (2019) · Asian Journal of Scientific Research · doi:10.3923/ajsr.2019.508.515 · Cited by 5
Silva, R. D. O., Silvino, A. C., Ribeiro, J. M., & Dahmouche, K. (2021) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-021-05611-0 · Cited by 5
Kuang, T., Lou, J., Guo, B., Wang, Y., Gong, Y., He, M., Zhang, K., Qin, J., Liu, Y., & Yu, J. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57487 · Cited by 4
Ayan, U., Mohoppu, M., Sebastian, J. A., Elkanayati, R. M., Toragall, V. B., Wadi, A., Nouranian, S., Werfel, T. A., & Villacorta, B. S. (2025) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c02009 · Cited by 4
Plasticization of biodegradable stereocomplex polylactides with poly(propylene glycol)
Pakkethati, K., & Baimark, Y. (2017) · Polymer Science Series A · doi:10.1134/s0965545x17010126 · Cited by 5
Baimark, Y., Srihanam, P., & Srisuwan, Y. (2024) · Polymers · doi:10.3390/polym16142078 · Cited by 3
Angel, J. M., & Kyu, T. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c13793 · Cited by 3
Beneficial Effect of Compatibilization on the Aging of Cellulose‐Reinforced Biopolymer Blends
Bessadok, A., Belgacem, M. N., Dufresne, A., & Bras, J. (2010) · Macromolecular Materials and Engineering · doi:10.1002/mame.201000133 · Cited by 3
Nealy, S. L., Kozlovskaya, V., Nikishau, P. A., Inman, D. J., Dluhy, R. A., Oh, J., & Kharlampieva, E. (2025) · ACS Applied Engineering Materials · doi:10.1021/acsaenm.5c00099 · Cited by 2
Rajesh, K. A., Kartha, S. A., Issac, M. N., & Varghese, T. O. (2022) · Iranian Polymer Journal · doi:10.1007/s13726-022-01126-9 · Cited by 2
Zhang, Q. (2020) · ERA: Education and Research Archive (University of Alberta) · doi:10.7939/r3-0c1v-zp86 · Cited by 2
THITINARDWONG, N., Chavarnakul, T., & Srikulkit, K. (2025) · Journal of Metals Materials and Minerals · doi:10.55713/jmmm.v36i1.2533 · Cited by 1
Zhu, H., Jiang, Z., & Qiu, Z. (2023) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-023-12641-z · Cited by 1
Flexible PLA Copolymers with Low Melt Flow Index for Blown Film Applications
Hernández, B. R., & Lieske, A. (2024) · Chemie Ingenieur Technik · doi:10.1002/cite.202300150 · Cited by 1
Water impermeability of hydraulic concrete based with thermal power plant waste substrate
Yunusova, F., & Muslimov, T. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/883/1/012044 · Cited by 1
Characterization of Polylactic Acid/Organoclay Nanocomposites
Ali, F. B., Azmi, A. S., Anuar, H., & Jamaluddin, J. B. (2020) · Springer eBooks · doi:10.1007/978-981-15-4742-3_7 · Cited by 2
Soto‐Valdez, H. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch13 · Cited by 1
Badania wpływu wielofunkcyjnego oligomeru na niektóre właściwości polilaktydu
Malinowski, R., Zenkiewicz, M., & Dzwonkowski, J. (2012) · Przetwórstwo Tworzyw
Polylactide microcapsules and films: preparation and properties
Sawalha, H. (2009) · doi:10.18174/1512 · Cited by 1
Chouaytan, J., & Tanrattanakul, V. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.802.144
Metadata
- Authors
- Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M.
- Affiliations
- Centrum Badań Molekularnych i Makromolekularnych Polskiej Akademii Nauk (PL)
- Centre of Molecular and Macromolecular Studies, Polish Academy of Sciences, 90 363 Lodz, Poland
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-06-06
- Volume
- 7
- Issue
- 7
- Pages
- 2128-2135
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2088024029
- Cited by
- 320
- References
- 25
- Citations by year
- 2026: 7 · 2025: 12 · 2024: 15 · 2023: 14 · 2022: 12 · 2021: 13 · 2020: 19 · 2019: 15 · 2018: 19 · 2017: 29 · 2016: 26 · 2015: 20 · 2014: 27 · 2013: 18 · 2012: 15
- FWCI
- 5.14
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- poly(L-lactic acid), polypropylene glycol, plasticizers, polyethylene glycol, polymer blends, glass transition temperature, crystallization, tensile properties, yield stress, elongation at break, phase separation, crazing, molecular weight effects
- MeSH terms
- Calorimetry, Differential Scanning, Hot Temperature, Microscopy, Electron, Scanning, Microscopy, Polarization, Plastics, Polyesters, Tensile Strength, Propylene Glycol
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.