The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Polylactide-Based Renewable Green Composites from Agricultural Residues and Their Hybrids
Open accessAbstract
Agricultural natural fibers like jute, kenaf, sisal, flax, and industrial hemp have been extensively studied in green composites. The continuous supply of biofibers in high volumes to automotive part makers has raised concerns. Because extrusion followed by injection molding drastically reduces the aspect ratio of biofibers, the mechanical performance of injection molded agricultural residue and agricultural fiber-based composites are comparable. Here, the use of inexpensive agricultural residues and their hybrids that are 8-10 times cheaper than agricultural fibers is demonstrated to be a better way of getting sustainable materials with better performance. Green renewable composites from polylactide (PLA), agricultural residues (wheat straw, corn stover, soy stalks, and their hybrids) were successfully prepared through twin-screw extrusion, followed by injection molding. The effect on mechanical properties of varying the wheat straw amount from 10 to 40 wt % in PLA-wheat straw composites was studied. Tensile moduli were compared with theoretical calculations from the rule of mixture (ROM). Combination of agricultural residues as hybrids is proved to reduce the supply chain concerns for injection molded green composites. Densities of the green composites were found to be lower than those of conventional glass fiber composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.06.022 · Cited by 699
Self-citationThermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Modification of poly(L‐lactides) by blending: mechanical and hydrolytic behavior
Hiljanen‐Vainio, M., Varpomaa, P., Seppälä, J., & Törmälä, P. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021970427 · Cited by 249
Cited by
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Self-citationIlyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Development and characterization of PLA-based green composites: A review
Bajpai, P. K., Singh, I., & Madaan, J. (2014) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705712439571 · Cited by 363
Wood polymer composites and their contribution to cascading utilisation
Teuber, L., Osburg, V.-S., Toporowski, W., Militz, H., & Krause, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.009 · Cited by 172
Bai, H., Huang, C., Xiu, H., Gao, Y., Zhang, Q., & Fu, Q. (2013) · Polymer · doi:10.1016/j.polymer.2013.07.051 · Cited by 153
Mechanical and Biodegradable Properties of Jute/Flax Reinforced PLA Composites
Ejaz, M., Azad, M. M., Shah, A. U. R., Afaq, S. K., & Song, J.-I. (2020) · Fibers and Polymers · doi:10.1007/s12221-020-1370-y · Cited by 108
CNT Induced β-Phase in Polylactide: Unique Crystallization, Biodegradation, and Biocompatibility
Singh, N. K., Singh, S. K., Dash, D., Gonugunta, P., Misra, M., & Maiti, P. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4009042 · Cited by 68
Self-citation
Metadata
- Authors
- Nyambo, C., Mohanty, A. K., & Misra, M.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-05-26
- Volume
- 11
- Issue
- 6
- Pages
- 1654-1660
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2027932468
- Cited by
- 224
- References
- 4
- FWCI
- 16.75
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.