The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Lignin-Based Electrospun Nanofibers Reinforced with Cellulose Nanocrystals
Abstract
Lignin-based fibers were produced by electrospinning aqueous dispersions of lignin, poly(vinyl alcohol) (PVA), and cellulose nanocrystals (CNCs). Defect-free nanofibers with up to 90 wt % lignin and 15% CNCs were achieved. The properties of the aqueous dispersions, including viscosity, electrical conductivity, and surface tension, were examined and correlated to the electrospinnability and resulting morphology of the composite fibers. A ternary lignin-PVA-water phase diagram was constructed as a tool to rationalize the effect of mixing ratios on the dispersion electrospinability and morphology of the resulting fibers. The influence of reinforcing CNCs on the thermal properties of the multicomponent fibers was investigated by using thermal gravimetric analysis and differential scanning calorimetry. The thermal stability of the system was observed to increase owing to a strong interaction of the lignin-PVA matrix with the dispersed CNCs, mainly via hydrogen bonding, as observed in Fourier transform infrared spectroscopy experiments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Self-citation
Cited by
Zhang, B., Kang, F., Tarascon, J.-M., & Kim, J.-K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.08.002 · Cited by 720
Recent developments on nanocellulose reinforced polymer nanocomposites: A review
Kargarzadeh, H., Mariano, M., Huang, J., Lin, N., Ahmad, I., Dufresne, A., & Thomas, S. (2017) · Polymer · doi:10.1016/j.polymer.2017.09.043 · Cited by 673
Advanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Self-citationLignin‐Derived Advanced Carbon Materials
Chatterjee, S., & Saito, T. (2015) · ChemSusChem · doi:10.1002/cssc.201500692 · Cited by 333
Zhou, C., Shi, Q., Guo, W., Terrell, L., Qureshi, A. T., Hayes, D. J., & Wu, Q. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4005072 · Cited by 327
Wang, S.-X., Yang, L., Stubbs, L. P., Li, X., & He, C. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4043867 · Cited by 319
Multifunctional lignin-based nanocomposites and nanohybrids
Lizundia, E., Sipponen, M. H., Greca, L. G., Balakshin, M., Tardy, B. L., Rojas, O. J., & Puglia, D. (2021) · Green Chemistry · doi:10.1039/d1gc01684a · Cited by 293
Self-citation
Metadata
- Authors
- Ago, M., Okajima, K., Jakes, J. E., Park, S., & Rojas, O. J.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-02-14
- Volume
- 13
- Issue
- 3
- Pages
- 918-926
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2318780132
- Cited by
- 202
- References
- 2
- FWCI
- 4.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
