The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Electrospun Bio-Nanocomposite Scaffolds for Bone Tissue Engineering by Cellulose Nanocrystals Reinforcing Maleic Anhydride Grafted PLA
Abstract
Electrospun fibrous bio-nanocomposite scaffolds reinforced with cellulose nanocrystals (CNCs) were fabricated by using maleic anhydride (MAH) grafted poly(lactic acid) (PLA) as matrix with improved interfacial adhesion between the two components. Morphological, thermal, mechanical, and in vitro degradation properties as well as basic cytocompatibility using human adult adipose derived mesenchymal stem cells (hASCs) of MAH grafted PLA/CNC (i.e., MPLA/CNC) scaffolds were characterized. Morphological investigation indicated that the diameter and polydispersity of electrospun MPLA/CNC nanofibers were reduced with the increased CNC content. The addition of CNCs improved both the thermal stability and mechanical properties of MPLA/CNC composites. The MPLA/CNC scaffolds at the 5 wt % CNC loading level showed not only superior tensile strength (more than 10 MPa), but also improved stability during in vitro degradation compared with the MPLA and PLA/CNC counterparts. Moreover, the fibrous MPLA/CNC composite scaffolds were non-toxic to hASCs and capable of supporting cell proliferation. This study demonstrates that fibrous MPLA/CNC bio-nanocomposite scaffolds are biodegradable, cytocompatible, and possess useful mechanical properties for bone tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Cited by
Bone biomaterials and interactions with stem cells
Gao, C., Peng, S., Feng, P., & Shuai, C. (2017) · Bone Research · doi:10.1038/boneres.2017.59 · Cited by 720
Cellulose Nanoparticles as Modifiers for Rheology and Fluid Loss in Bentonite Water-based Fluids
Li, M.-C., Wu, Q., Song, K., Qing, Y., & Wu, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00498 · Cited by 373
Self-citationNatural and Synthetic Polymers for Bone Scaffolds Optimization
Donnaloja, F., Jacchetti, E., Soncini, M., & Raimondi, M. T. (2020) · Polymers · doi:10.3390/polym12040905 · Cited by 324
Poly(glycerol sebacate urethane)–cellulose nanocomposites with water-active shape-memory effects
Wu, T., Frydrych, M., O’Kelly, K., & Chen, B. (2014) · Biomacromolecules · doi:10.1021/bm500507z · Cited by 126
Hivechi, A., Bahrami, S. H., Siegel, R. A., Siehr, A., Sahoo, A., Milan, P. B., Joghataei, M. T., Amoupour, M., & Simorgh, S. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111855 · Cited by 38
Metadata
- Authors
- Zhou, C., Shi, Q., Guo, W., Terrell, L., Qureshi, A. T., Hayes, D. J., & Wu, Q.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-04-16
- Volume
- 5
- Issue
- 9
- Pages
- 3847-3854
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2013213171
- Cited by
- 327
- References
- 4
- FWCI
- 9.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Electrospun Bio-Nanocomposite Scaffolds for Bone Tissue Engineering by Cellulose Nanocrystals Reinforcing Maleic Anhydride Grafted PLA. https://app.cochat.ai/papers/10.1021/am4005072
- The paper
- Zhou, C., Shi, Q., Guo, W., Terrell, L., Qureshi, A. T., Hayes, D. J., & Wu, Q. (2013). Electrospun Bio-Nanocomposite Scaffolds for Bone Tissue Engineering by Cellulose Nanocrystals Reinforcing Maleic Anhydride Grafted PLA. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am4005072
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
