The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Electrospun Fibrous Mats with High Porosity as Potential Scaffolds for Skin Tissue Engineering
Abstract
Diffusional limitations of mass transport have adverse effects on engineering tissues that normally have high vascularity and cellularity. The current electrospinning method is not always successful to create micropores to encourage cell infiltration within the scaffold, especially when relatively large-sized pores are required. In this study, a slow rotating frame cylinder was developed as the collector to extend the pore size and increase the porosity of electrospun fibrous scaffolds. Fibrous mats with porosity as high as 92.4% and average pore size of 132.7 microm were obtained. Human dermal fibroblasts (HDFs) were seeded onto these mats, which were fixed on a cell-culture ring to prevent the shrinkage and contraction during the incubation. The viability test indicated that significantly more HDFs were generated on highly porous fibrous mats. Toluidine blue staining showed that the highly porous scaffold provided mechanical support for cells to maintain uniform distribution. The cross-section observations indicated that cells migrated and infiltrated more than 100 microm inside highly porous fibrous mats after 5 d incubation. The immunohistochemistry analysis demonstrated that cells began secreting collagen, which is the main constituent of extracellular matrix. It is supposed that highly porous electrospun fibrous scaffolds could be constructed by this elaboration and may be used for skin tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,427
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
Structure and process relationship of electrospun bioabsorbable nanofiber membranes
Zong, X., Kim, K., Fang, D., Ran, S., Hsiao, B. S., & Chu, B. (2002) · Polymer · doi:10.1016/s0032-3861(02)00275-6 · Cited by 1,893
The Molecular and Cellular Biology of Wound Repair
(1988) · Springer eBooks · doi:10.1007/978-1-4615-1795-5 · Cited by 1,516
Aligned biodegradable nanofibrous structure: a potential scaffold for blood vessel engineering
Xu, C. Y., Inai, R., Kotaki, M., & Ramakrishna, S. (2004) · Biomaterials · doi:10.1016/s0142-9612(03)00593-3 · Cited by 1,213
Nanofiber technology: Designing the next generation of tissue engineering scaffolds
Barnes, C. P., Sell, S. A., Boland, E. D., Simpson, D. G., & Bowlin, G. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.022 · Cited by 1,141
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Biomacromolecules · doi:10.1021/bm060680j · Cited by 956
CHONG, E., PHAN, T., LIM, I., ZHANG, Y., BAY, B., RAMAKRISHNA, S., & LIM, C. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.01.002 · Cited by 919
Electrospinning Nanofibers as Uniaxially Aligned Arrays and Layer‐by‐Layer Stacked Films
Li, D., Wang, Y., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200306226 · Cited by 866
Tissue Engineering: Orthopedic Applications
Laurencin, C. T., Ambrosio, A. M. A., Borden, M. D., & Cooper, J. A. (1999) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.1.1.19 · Cited by 752
Schnell, E., Klinkhammer, K., Balzer, S., Brook, G., Klee, D., Dalton, P., & Mey, J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.03.009 · Cited by 727
Oh, S. H., Park, I. K., Kim, J. M., & Lee, J. H. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.11.024 · Cited by 713
Continuous Electrospinning of Aligned Polymer Nanofibers onto a Wire Drum Collector
Katta, P., Alessandro, M., Ramsier, R. D., & Chase, G. G. (2004) · Nano Letters · doi:10.1021/nl0486158 · Cited by 688
Electrospun fine-textured scaffolds for heart tissue constructs
Zong, X., Bien, H., Chung, C.-Y., Yin, L., Fang, D., Hsiao, B. S., Chu, B., & Entcheva, E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.01.052 · Cited by 641
Kidoaki, S., Kwon, I. K., & Matsuda, T. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.063 · Cited by 548
Ma, M., Hill, R. M., Lowery, J. L., Fridrikh, S. V., & Rutledge, G. C. (2005) · Langmuir · doi:10.1021/la047064y · Cited by 494
He, W., Ma, Z., Yong, T., Teo, W. E., & Ramakrishna, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.049 · Cited by 468
Three-dimensional electrospun ECM-based hybrid scaffolds for cardiovascular tissue engineering
Heydarkhan-Hagvall, S., Schenke-Layland, K., Dhanasopon, A. P., Rofail, F., Smith, H., Wu, B. M., Shemin, R., Beygui, R. E., & MacLellan, W. R. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.034 · Cited by 445
Controlled fabrication of a biological vascular substitute
Stitzel, J., Liu, J., Lee, S. J., Komura, M., Berry, J., Soker, S., Lim, G., Van Dyke, M., Czerw, R., Yoo, J. J., et al. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.048 · Cited by 435
Improved Cellular Infiltration in Electrospun Fiber via Engineered Porosity
Nam, J., Huang, Y., Agarwal, S., & Lannutti, J. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0306 · Cited by 414
Nano-Featured Scaffolds for Tissue Engineering: A Review of Spinning Methodologies
Murugan, R., & Ramakrishna, S. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.435 · Cited by 387
Xin, X., Hussain, M., & Mao, J. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.042 · Cited by 377
Statistical geometry of pores and statistics of porous nanofibrous assemblies
Eichhorn, S. J., & Sampson, W. W. (2005) · Journal of The Royal Society Interface · doi:10.1098/rsif.2005.0039 · Cited by 350
Cui, W., Li, X., Zhu, X., Yu, G., Zhou, S., & Weng, J. (2006) · Biomacromolecules · doi:10.1021/bm060057z · Cited by 342
Self-citationInvestigation on process parameters of electrospinning system through orthogonal experimental design
Cui, W., Li, X., Zhou, S., & Weng, J. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25464 · Cited by 336
Self-citationA nanofibrous composite membrane of PLGA–chitosan/PVA prepared by electrospinning
Duan, B., Yuan, X., Zhu, Y., Zhang, Y., Li, X., Zhang, Y., & Yao, K. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2006.04.021 · Cited by 273
Self-citationBaker, S. C., Atkin, N., Gunning, P. A., Granville, N., Wilson, K., Wilson, D., & Southgate, J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.026 · Cited by 261
Degradation patterns and surface wettability of electrospun fibrous mats
Cui, W., Li, X., Zhou, S., & Weng, J. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.12.002 · Cited by 185
Self-citationDeng, X. M., Xiong, C., Cheng, L., & Xu, R. P. (1990) · Journal of Polymer Science Polymer Letters Edition · doi:10.1002/pol.1990.140281303 · Cited by 131
Pan, H., Jiang, H., & Chen, W. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.032 · Cited by 104
Electrospinning versus knitting: two scaffolds for tissue engineering of the aortic valve
Lieshout, V. M. M., Vaz, C. M., Rutten, M. C. M., Peters, G. G., & Baaijens, F. F. (2005) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856206774879153 · Cited by 98
Functionalization of poly( L ‐lactide) nanofibrous scaffolds with bioactive collagen molecules
Chiu, J. B., Liu, C., Hsiao, B. S., Chu, B., & Hadjiargyrou, M. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31279 · Cited by 71
Wang, Y., & Cai, J. (2007) · Current Applied Physics · doi:10.1016/j.cap.2006.11.027 · Cited by 57
Lee, J.-J., Lee, S.-G., Park, J., et al. (2007) · Current Applied Physics · doi:10.1016/j.cap.2006.11.011 · Cited by 42
Cited by
One‐Dimensional Composite Nanomaterials: Synthesis by Electrospinning and Their Applications
Lu, X., Wang, C., & Wei, Y. (2009) · Small · doi:10.1002/smll.200900445 · Cited by 874
Electrospun scaffolds for tissue engineering of vascular grafts
Hasan, A., Memic, A., Annabi, N., Hossain, M., Paul, A., Dokmeci, M. R., Dehghani, F., & Khademhosseini, A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.08.022 · Cited by 742
Electrospun polymer biomaterials
Ding, J., Zhang, J., Li, J., Li, D., Xiao, C., Xiao, H., Yang, H., Zhuang, X., & Chen, X. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.01.002 · Cited by 605
Developments of Advanced Electrospinning Techniques: A Critical Review
Li, Y., Zhu, J., Cheng, H., Li, G., Cho, H., Jiang, M., Gao, Q., & Zhang, X. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100410 · Cited by 578
Electrospun nanofibrous materials for tissue engineering and drug delivery
Cui, W., Zhou, Y., & Chang, J. (2010) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/11/1/014108 · Cited by 492
Self-citation
Metadata
- Authors
- Zhu, X., Cui, W., Li, X., & Jin, Y.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-06-26
- Volume
- 9
- Issue
- 7
- Pages
- 1795-1801
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2073627808
- Cited by
- 383
- References
- 34
- FWCI
- 7.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.