Transparent and High Gas Barrier Films of Cellulose Nanofibers Prepared by TEMPO-Mediated Oxidation
The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Abstract
Softwood and hardwood celluloses were oxidized by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-mediated oxidation. The TEMPO-oxidized cellulose fibers were converted to transparent dispersions in water, which consisted of individual nanofibers 3-4 nm in width. Films were then prepared from the TEMPO-oxidized cellulose nanofibers (TOCN) and characterized from various aspects. AFM images showed that the TOCN film surface consisted of randomly assembled cellulose nanofibers. The TOCN films prepared from softwood cellulose were transparent and flexible and had extremely low coefficients of thermal expansion caused by high crystallinity of TOCN. Moreover, oxygen permeability of a polylactic acid (PLA) film drastically decreased to about 1/750 by forming a thin TOCN layer on the PLA film. Hydrophobization of the originally hydrophilic TOCN films was achieved by treatment with alkylketene dimer. These unique characteristics of the TOCN films are promising for potential applications in some high-tech materials.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Recently, similar coating of MFC (from TEMPO treatment) on PLA films allowed decreasing the OTR from 746 to 1 mL m -2 day -1 Pa -1 , respectively, for pure PLA film and PLA coated with MFC [147].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [147]
Citations
Cites
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Self-citationSaito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796
Self-citationSaito, T., & Isogai, A. (2004) · Biomacromolecules · doi:10.1021/bm0497769 · Cited by 1,292
Self-citationReview: Current international research into cellulosic fibres and composites
Eichhorn, S. J., Baillie, C. A., Zafeiropoulos, N., Mwaikambo, L. Y., Ansell, M. P., Dufresne, A., Entwistle, K. M., Herrera-Franco, P. J., Escamilla, G. C., Groom, L., et al. (2001) · Journal of Materials Science · doi:10.1023/a:1017512029696 · Cited by 943
Obtaining Cellulose Nanofibers with a Uniform Width of 15 nm from Wood
Abe, K., Iwamoto, S., & Yano, H. (2007) · Biomacromolecules · doi:10.1021/bm700624p · Cited by 885
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
Nano-fibrillation of pulp fibers for the processing of transparent nanocomposites
Iwamoto, S., Nakagaito, A. N., & Yano, H. (2007) · Applied Physics A · doi:10.1007/s00339-007-4175-6 · Cited by 669
Novel nanocomposites based on polyurethane and micro fibrillated cellulose
Özgür Seydibeyoğlu, M., & Oksman, K. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.08.008 · Cited by 290
Introduction of aldehyde groups on surfaces of native cellulose fibers by TEMPO-mediated oxidation
Saito, T., & Isogai, A. (2006) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.04.038 · Cited by 278
Self-citation
Research works printed but not linked: 3
- Turbak A. F., 1983, J. Appl. Polym. Sci., 37, 815
- Isogai A., 1997, J. Pulp Paper Sci., 23, J215
- Parks E. J., 1972, Tappi J., 55, 1510
Cited by
Items 201–300 of 1,000
Gu, F., Wang, W., Cai, Z., Xue, F., Jin, Y., & Zhu, J. Y. (2018) · Cellulose · doi:10.1007/s10570-018-1765-8 · Cited by 145
Shimizu, M., Saito, T., Fukuzumi, H., & Isogai, A. (2014) · Biomacromolecules · doi:10.1021/bm501329v · Cited by 141
Self-citationTabasum, S., Noreen, A., Maqsood, M. F., Umer, H., Akram, N., Nazli, Z.-I.-H., Chatha, S. A. S., & Zia, K. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.07.154 · Cited by 146
Nanocellulose: A mini-review on types and use in drug delivery systems
Raghav, N., Sharma, M. R., & Kennedy, J. F. (2020) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2020.100031 · Cited by 161
Bharimalla, A. K., Deshmukh, S. P., Vigneshwaran, N., Patil, P. G., & Prasad, V. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1233281 · Cited by 146
Microfibrillated cellulose coatings as new release systems for active packaging
Lavoine, N., Desloges, I., & Bras, J. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.12.035 · Cited by 146
TEMPO-mediated surface oxidation of cellulose nanocrystals (CNCs)
Fraschini, C., Chauve, G., & Bouchard, J. (2017) · Cellulose · doi:10.1007/s10570-017-1319-5 · Cited by 139
de Campos, A., Corrêa, A. C., Cannella, D., Teixeira, E. D. M., Marconcini, J. M., Dufresne, A., Mattoso, L. H. C., Cassland, P., & Sanadi, A. R. (2013) · Cellulose · doi:10.1007/s10570-013-9909-3 · Cited by 149
Serrà, A., González, I., Oliver-Ortega, H., Tarrés, Q., Delgado‐Aguilar, M., & Mutjé, P. (2017) · Polymers · doi:10.3390/polym9110557 · Cited by 142
Liu, S., Low, Z.-X. N., Xie, Z., & Wang, H. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202001180 · Cited by 142
Berglund, L., Noël, M., Aitomäki, Y., Öman, T., & Oksman, K. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.08.003 · Cited by 144
Toward a deeper understanding of the thermal degradation mechanism of nanocellulose
Lichtenstein, K., & Lavoine, N. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.09.018 · Cited by 144
Preparation of cellulose nanomaterials via cellulose oxalates
Henschen, J., Li, D., & Ek, M. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.02.056 · Cited by 135
Barrier Films from Renewable Forestry Waste
Edlund, U., Ryberg, Y. Z., & Albertsson, A. (2010) · Biomacromolecules · doi:10.1021/bm100767g · Cited by 135
Displays from Transparent Films of Natural Nanofibers
Nakagaito, A. N., Nogi, M., & Yano, H. (2010) · MRS Bulletin · doi:10.1557/mrs2010.654 · Cited by 134
Nanocellulose for Paper and Textile Coating: The Importance of Surface Chemistry
Spagnuolo, L., D’Orsi, R., & Operamolla, A. (2022) · ChemPlusChem · doi:10.1002/cplu.202200204 · Cited by 144
Aulin, C., & Ström, G. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie301785a · Cited by 132
Yu, Z., Alsammarraie, F. K., Nayigiziki, F. X., Wang, W., Vardhanabhuti, B., Mustapha, A., & Lin, M. (2017) · Food Research International · doi:10.1016/j.foodres.2017.05.009 · Cited by 138
Sun, X., Wu, Q., Ren, S., & Lei, T. (2015) · Cellulose · doi:10.1007/s10570-015-0574-6 · Cited by 131
Water redispersible cellulose nanofibrils adsorbed with carboxymethyl cellulose
Butchosa, N., & Zhou, Q. (2014) · Cellulose · doi:10.1007/s10570-014-0452-7 · Cited by 138
Plant‐Based Modular Building Blocks for “Green” Electronic Skins
Wang, L., Wang, K., Lou, Z., Jiang, K., & Shen, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804510 · Cited by 132
Pullulan–nanofibrillated cellulose composite films with improved thermal and mechanical properties
Trovatti, E., Fernandes, S. C. M., Rubatat, L., Perez, D. D. S., Freire, C. S. R., Silvestre, A. J. D., & Neto, C. P. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.06.003 · Cited by 140
Biopolymer@Metal-Organic Framework Hybrid Materials: A Critical Survey
Hankari, S. E., Bousmina, M., & Kadib, A. E. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100579 · Cited by 132
Cellulose nanofibers as excipient for the delivery of poorly soluble drugs
Löbmann, K., & Svagan, A. J. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.09.064 · Cited by 135
Rice straw cellulose nanofibrils reinforced poly(vinyl alcohol) composite films
Wang, Z., Qiao, X., & Sun, K. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.025 · Cited by 134
Shen, L., Zhang, H., Lei, Y.-Z., Chen, Y., Liang, M., & Zou, H. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117405 · Cited by 129
TEMPO-Oxidized Cellulose Nanofibrils Dispersed in Organic Solvents
Okita, Y., Fujisawa, S., Saito, T., & Isogai, A. (2010) · Biomacromolecules · doi:10.1021/bm101255x · Cited by 141
Self-citationYadav, C., Saini, A., Zhang, W., You, X., Chauhan, I., Mohanty, P., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.038 · Cited by 130
Hassan, E. A., Hassan, M. L., ABOUZEID, R. E., & El‐Wakil, N. A. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.12.006 · Cited by 130
Determination of nanocellulose fibril length by shear viscosity measurement
Tanaka, R., Saito, T., Ishii, D., & Isogai, A. (2014) · Cellulose · doi:10.1007/s10570-014-0196-4 · Cited by 132
Self-citationOun, A. A., & Rhim, J. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.01.052 · Cited by 126
Modification of Cellulose Nanofibrils with Luminescent Carbon Dots
Junka, K., Guo, J., Filpponen, I., Laine, J., & Rojas, O. J. (2014) · Biomacromolecules · doi:10.1021/bm4017176 · Cited by 126
Mwafy, E. A., Hasanin, M. S., & Mostafa, A. M. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2019.105744 · Cited by 126
Recent Advances in Cellulose Nanofibers Preparation through Energy-Efficient Approaches: A Review
Petroudy, S. R. D., Chabot, B., Loranger, É., Naebe, M., Shojaeiarani, J., Gharehkhani, S., Ahvazi, B. C., Hu, J., & Thomas, S. (2021) · Energies · doi:10.3390/en14206792 · Cited by 135
TEMPO-oxidized cellulose nanofibrils prepared from various plant holocelluloses
Kuramae, R., Saito, T., & Isogai, A. (2014) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2014.06.011 · Cited by 126
Self-citationJiang, Z., & Ngai, T. (2022) · Polymers · doi:10.3390/polym14081533 · Cited by 125
Goi, Y., Fujisawa, S., Saito, T., Yamane, K., Kuroda, K., & Isogai, A. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b01977 · Cited by 124
Self-citationBarrier coatings with various types of cellulose nanofibrils and their barrier properties
Yook, S., Park, H., Park, H., Lee, S.-Y., Kwon, J., & Youn, H. J. (2020) · Cellulose · doi:10.1007/s10570-020-03061-5 · Cited by 124
Gupta, G. K., & Shukla, P. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.601256 · Cited by 124
Reduction of water wettability of nanofibrillated cellulose by adsorption of cationic surfactants
Xhanari, K., Syverud, K., Chinga‐Carrasco, G., Paso, K. G., & Stenius, P. J. (2010) · Cellulose · doi:10.1007/s10570-010-9482-y · Cited by 140
Fukuzumi, H., Saito, T., Iwamoto, S., Kumamoto, Y., Ohdaira, T., Suzuki, R., & Isogai, A. (2011) · Biomacromolecules · doi:10.1021/bm201079n · Cited by 135
Self-citationZhang, H., Yang, M., Luan, Q., Tang, H., Huang, F., Xiang, X., Yang, C., & Bao, Y. (2017) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.6b05815 · Cited by 123
A versatile method for producing functionalized cellulose nanofibers and their application
Huang, P., Yang, Z., Kuga, S., Wu, M., & Huang, Y. (2016) · Nanoscale · doi:10.1039/c5nr08179c · Cited by 122
Wang, W., Mozuch, M. D., Sabo, R. C., Kersten, P. J., Zhu, J. Y., & Jin, Y. (2014) · Cellulose · doi:10.1007/s10570-014-0465-2 · Cited by 130
Li, F., Biagioni, P., Finazzi, M., Tavazzi, S., & Piergiovanni, L. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.11.091 · Cited by 127
Comparative study of aramid nanofiber (ANF) and cellulose nanofiber (CNF)
Yang, B., Zhang, M., Lu, Z., Tan, J., Luo, J., Song, S., Ding, X., Wang, L., Lü, P., & Zhang, Q. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.12.086 · Cited by 121
Wood cellulose nanofibrils prepared by TEMPO electro-mediated oxidation
Isogai, T., Saito, T., & Isogai, A. (2010) · Cellulose · doi:10.1007/s10570-010-9484-9 · Cited by 121
Self-citationMechanics of Strong and Tough Cellulose Nanopaper
Meng, Q., & Wang, T. J. (2019) · Applied Mechanics Reviews · doi:10.1115/1.4044018 · Cited by 122
Thuy, V. T. T., Hào, L. T., Jeon, H., Koo, J. M., Park, J., Lee, E. S., Hwang, S. Y., Choi, S., Park, J., & Oh, D. X. (2021) · Green Chemistry · doi:10.1039/d0gc03647a · Cited by 120
Chen, S., Song, Y., & Xu, F. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04814 · Cited by 119
Paper in Electronic and Optoelectronic Devices
Ha, D., Fang, Z., & Zhitenev, N. B. (2018) · Advanced Electronic Materials · doi:10.1002/aelm.201700593 · Cited by 117
TEMPO-mediated oxidation of softwood thermomechanical pulp
Okita, Y., Saito, T., & Isogai, A. (2009) · Holzforschung · doi:10.1515/hf.2009.096 · Cited by 117
Self-citationKim, S., & Cha, S. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40289 · Cited by 116
Xiao, S., Gao, R., Gao, L., & Li, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.115 · Cited by 116
Nanostructured membranes based on native chitin nanofibers prepared by mild process
Mushi, N. E., Butchosa, N., Salajková, M., Zhou, Q., & Berglund, L. A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.05.038 · Cited by 115
Jaušovec, D., Vogrinčič, R., & Kokol, V. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.014 · Cited by 115
Sirviö, J. A., Hyypiö, K., Asaadi, S., Junka, K., & Liimatainen, H. (2020) · Green Chemistry · doi:10.1039/c9gc04119b · Cited by 116
Larsson, P. A., Berglund, L. A., & Wågberg, L. (2014) · Biomacromolecules · doi:10.1021/bm500360c · Cited by 114
Uncertainty quantification in nanomechanical measurements using the atomic force microscope
Wagner, R., Moon, R. J., Pratt, J. R., Shaw, G. A., & Raman, A. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/45/455703 · Cited by 122
Development of completely dispersed cellulose nanofibers
Isogai, A. (2018) · Proceedings of the Japan Academy Series B · doi:10.2183/pjab.94.012 · Cited by 122
Self-citationAnti-oxidative and UV-absorbing biohybrid film of cellulose nanofibrils and tannin extract
Li, P., Sirviö, J. A., Haapala, A., Khakalo, A., & Liimatainen, H. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.02.002 · Cited by 115
Preparation and characterization of hydrophobic derivatives of TEMPO-oxidized nanocelluloses
Johnson, R. K., Zink-Sharp, A., & Glasser, W. G. (2011) · Cellulose · doi:10.1007/s10570-011-9579-y · Cited by 125
Kim, T., Tran, T. H., Hwang, S. Y., Park, J., Oh, D. X., & Kim, B. (2019) · ACS Nano · doi:10.1021/acsnano.8b08522 · Cited by 110
Chen, Y., Lu, K., Song, Y., Han, J., Yue, Y., Biswas, S. K., Wu, Q., & Xiao, H. (2019) · Nanomaterials · doi:10.3390/nano9121737 · Cited by 110
One‐Step Dispersion of Cellulose Nanofibers by Mechanochemical Esterification in an Organic Solvent
Huang, P., Wu, M., Kuga, S., Wang, D., Wu, D., & Huang, Y. P. (2012) · ChemSusChem · doi:10.1002/cssc.201200492 · Cited by 112
Nisin anchored cellulose nanofibers for long term antimicrobial active food packaging
Saini, S., Sillard, C., Belgacem, M. N., & Bras, J. (2016) · RSC Advances · doi:10.1039/c5ra22748h · Cited by 110
Overview of nanocellulose as additives in paper processing and paper products
Li, A., Xu, D., Luo, L., Zhou, Y., Wen, Y. F., Leng, X., Dai, D., Zhou, Y., Ahmad, H., Rao, J., et al. (2021) · Nanotechnology Reviews · doi:10.1515/ntrev-2021-0023 · Cited by 116
Structural Color Materials from Natural Polymers
Zhang, Z., Chen, Z., Shang, L., & Zhao, Y. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100296 · Cited by 114
Syverud, K., Xhanari, K., Chinga‐Carrasco, G., Yu, Y., & Stenius, P. J. (2010) · Journal of Nanoparticle Research · doi:10.1007/s11051-010-0077-1 · Cited by 109
Amoroso, L., France, K. J. D., Milz, C. I., Siqueira, G. D. F., Zimmermann, T., & Nyström, G. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c06345 · Cited by 108
Nechyporchuk, O., Yu, J., Nierstrasz, V. A., & Bordes, R. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00200 · Cited by 108
Pretreatment-dependent surface chemistry of wood nanocellulose for pH-sensitive hydrogels
Chinga‐Carrasco, G., & Syverud, K. (2014) · Journal of Biomaterials Applications · doi:10.1177/0885328214531511 · Cited by 111
Isolation of nanocrystalline cellulose from tunicates
Dunlop, M. J., Acharya, B., & Bissessur, R. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.06.056 · Cited by 106
Zhu, M., Jia, C., Wang, Y., Fang, Z., Dai, J., Xu, L., Huang, D., Wu, J., Li, Y., Song, J., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b08055 · Cited by 106
Composites of nanofibrillated cellulose with clay minerals: A review
Alves, L., Ferraz, E., & Gamelas, J. A. F. (2019) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2019.101994 · Cited by 113
Arsenic(III) Removal by Nanostructured Dialdehyde Cellulose–Cysteine Microscale and Nanoscale Fibers
Chen, H., Sharma, S. K., Sharma, P. R., Yeh, H., Johnson, K. I., & Hsiao, B. S. (2019) · ACS Omega · doi:10.1021/acsomega.9b03078 · Cited by 108
Nanofibrillated cellulose and its applications in cement-based composites: A review
Santos, R. F., Ribeiro, J. C. L., de Carvalho, J. M. F., Magalhães, W. L. E., Pedroti, L. G., Nalon, G. H., & de Lima, G. E. S. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123122 · Cited by 114
Beaumont, M., Tardy, B. L., Reyes, G., Koso, T. V., Schaubmayr, E., Jusner, P., King, A. W. T., Dagastine, R. R., Potthast, A., Rojas, O. J., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c06502 · Cited by 106
Nematic structuring of transparent and multifunctional nanocellulose papers
Zhao, M., Ansari, F., Takeuchi, M., Shimizu, M., Saito, T., Berglund, L. A., & Isogai, A. (2017) · Nanoscale Horizons · doi:10.1039/c7nh00104e · Cited by 108
Self-citationSaito, T., Hirota, M., Tamura, N., & Isogai, A. (2010) · Journal of Wood Science · doi:10.1007/s10086-009-1092-7 · Cited by 105
Self-citationNovel materials based on chitosan and cellulose
Fernandes, S. C. M., Freire, C. S. R., Silvestre, A. J. D., Neto, C. P., & Gandini, A. (2011) · Polymer International · doi:10.1002/pi.3024 · Cited by 106
TEMPO Electromediated Oxidation of Some Polysaccharides Including Regenerated Cellulose Fiber
Isogai, T., Saito, T., & Isogai, A. (2010) · Biomacromolecules · doi:10.1021/bm1002575 · Cited by 104
Self-citationHigh-Strength Nanocellulose–Talc Hybrid Barrier Films
Liimatainen, H., Mushi, N. E., Sliz, R., Ohenoja, K., Sirviö, J. A., Berglund, L. A., Hormi, O. E. O., & Niinimäki, J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4043273 · Cited by 103
Ishii, D., Saito, T., & Isogai, A. (2011) · Biomacromolecules · doi:10.1021/bm1013876 · Cited by 103
Self-citationHazy Transparent Cellulose Nanopaper
Hsieh, M.-C., Koga, H., Suganuma, K., & Nogi, M. (2017) · Scientific Reports · doi:10.1038/srep41590 · Cited by 103
Holocellulose Nanofibers of High Molar Mass and Small Diameter for High-Strength Nanopaper
Galland, S., Berthold, F., Prakobna, K., & Berglund, L. A. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00678 · Cited by 106
Cellulose Nanomaterials for Oil Exploration Applications
Liu, K., Du, H., Liu, W., Liu, H., Zhang, M., Xu, T., & Si, C. (2021) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2021.2007121 · Cited by 102
Multifunctional Coating Films by Layer-by-Layer Deposition of Cellulose and Chitin Nanofibrils
Qi, Z.-D., Saito, T., Fan, Y., & Isogai, A. (2012) · Biomacromolecules · doi:10.1021/bm201659b · Cited by 102
Self-citationHirota, M., Tamura, N., Saito, T., & Isogai, A. (2009) · Cellulose · doi:10.1007/s10570-009-9381-2 · Cited by 114
Self-citationModified nanofibrillated cellulose–polyvinyl alcohol films with improved mechanical performance
Virtanen, S., Vartianen, J., Setälä, H., Tammelin, T., & Vuoti, S. (2014) · RSC Advances · doi:10.1039/c3ra46287k · Cited by 107
Cao, S., Feng, X., Song, Y., Xue, X., Liu, H., Miao, M., Fang, J., & Shi, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02693 · Cited by 102
Mechanical characteristics of bacterial cellulose-reinforced mycelium composite materials
Elsacker, E. V., Vandelook, S., Damsin, B., Wylick, A. V., Peeters, E., & Laêt, L. D. (2021) · Fungal Biology and Biotechnology · doi:10.1186/s40694-021-00125-4 · Cited by 112
Masruchin, N., Park, B., Causin, V., & Um, I. C. (2015) · Cellulose · doi:10.1007/s10570-015-0624-0 · Cited by 106
Iwamoto, S., Kai, W., Isogai, T., Saito, T., Isogai, A., & Iwata, T. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.01.017 · Cited by 100
Self-citationIndividual cotton cellulose nanofibers: pretreatment and fibrillation technique
Chen, W., Abe, K., Uetani, K., Yu, H., Li, P., & Yano, H. (2014) · Cellulose · doi:10.1007/s10570-014-0172-z · Cited by 99
Yagyu, H., Saito, T., Isogai, A., Koga, H., & Nogi, M. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06915 · Cited by 99
Self-citationCellulose nanofibrils generated from jute fibers with tunable polymorphs and crystallinity
Yu, L., Lin, J., Tian, F., Li, X., Bian, F., & Wang, J. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00004h · Cited by 99
Chemical modification of polysaccharides for sustainable bioplastics
Wang, Z., Xu, C., Qi, L., & Chen, C. (2024) · Trends in Chemistry · doi:10.1016/j.trechm.2024.04.009 · Cited by 98
Mechanical characteristics of nanocellulose-PEG bionanocomposite wound dressings in wet conditions
Sun, F., Nordli, H. R., Pukstad, B. S., Gamstedt, E. K., & Chinga‐Carrasco, G. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.01.049 · Cited by 101
Lay, M., Pèlach, M. À., Pellicer, N., Tarrés, Q., Ngun, B. K., & Vilaseca, F. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.02.043 · Cited by 101
Metadata
- Authors
- Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A.
- Affiliations
- Kao Corporation (Japan) (JP)
- Corresponding author
- Isogai, Akira
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-12-04
- Volume
- 10
- Issue
- 1
- Pages
- 162-165
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2058779127
- Cited by
- 1,271
- References
- 19
- Citations by year
- 2026: 37 · 2025: 46 · 2024: 45 · 2023: 69 · 2022: 75 · 2021: 93 · 2020: 108 · 2019: 92 · 2018: 117 · 2017: 103 · 2016: 93 · 2015: 80 · 2014: 74 · 2013: 81 · 2012: 54
- FWCI
- 14.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Keywords
- cellulose nanofibers, TEMPO-mediated oxidation, transparent films, gas barrier properties, oxygen permeability, polylactic acid, hydrophobic modification, thermal expansion, crystallinity, flexible films
- MeSH terms
- Cellulose, Cyclic N-Oxides, Materials Testing, Membranes, Artificial, Oxidation-Reduction, Particle Size, Surface Properties, Temperature, Time Factors, Macromolecular Substances, Nanostructures
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.