The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Selective Localization of Multiwalled Carbon Nanotubes in Poly(ε-caprolactone)/Polylactide Blend
Abstract
Poly(epsilon-caprolactone)/polylactide blend (PCL/PLA) is an interesting biomaterial because PCL and PLA present good complementarity in their physical properties and biodegradability. However, the thermodynamic incompatibility between two component polymers restricts further applications of their blend. In this work, we used functionalized multiwalled carbon nanotube (MWCNT) to control the morphology of immiscible PCL/PLA blend. The ternary PCL/PLA/MWCNTs composites were hence prepared by melt mixing for the morphology and the properties investigation. It is interesting to find that the functionalized MWCNTs are selectively dispersed in the matrix PCL phase and on the interface between two polymer phases, leading to simultaneous occurrence of thermodynamically and kinetically driven compatibility. Those interface-localized MWCNTs prevent coalescence of the discrete domains and enhance the phase interfacial adhesion as well. As a result, the phase morphology of the ternary composites is improved remarkably in contrast to that of the blank PCL/PLA blend. Owing to that unique selective interface-localization and improved phase morphology, the ternary composites present far lower rheological and conductive percolation thresholds than those of the binary composites, and also present extraordinary mechanical properties even at very low loading levels of the MWCNTs. Therefore, the amphiphilic MWCNTs are believed to act as the reinforcements as well as the compatibilizer in the immiscible PCL/PLA blend.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer Nanocomposites Containing Carbon Nanotubes
Moniruzzaman, M., & Winey, K. I. (2006) · Macromolecules · doi:10.1021/ma060733p · Cited by 3,416
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Nanotube Networks in Polymer Nanocomposites: Rheology and Electrical Conductivity
Du, F., Scogna, R. C., Zhou, W., Brand, S., Fischer, J. E., & Winey, K. I. (2004) · Macromolecules · doi:10.1021/ma049164g · Cited by 1,307
Rheological behavior of multiwalled carbon nanotube/polycarbonate composites
Pötschke, P., Fornes, T. D., & Paul, D. R. (2002) · Polymer · doi:10.1016/s0032-3861(02)00151-9 · Cited by 1,243
Utracki, L. A. (1990) · NPARC · Cited by 1,158
Pötschke, P., Abdel-Goad, M., Alig, I., Dudkin, S., & Lellinger, D. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.040 · Cited by 647
Sinha Ray, S., Pouliot, S., Bousmina, M., & Utracki, L. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.009 · Cited by 436
Novel Nanocarbons—Structure, Properties, and Potential Applications
Subramoney, S. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199810)10:15<1157::aid-adma1157>3.0.co;2-n · Cited by 424
Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends
Broz, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00314-4 · Cited by 388
Khatua, B. B., Lee, D. J., Kim, H. Y., & Kim, J. K. (2004) · Macromolecules · doi:10.1021/ma0352072 · Cited by 365
Dell'Erba, R., Groeninckx, G., Maglio, G., Malinconico, M., & Migliozzi, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00269-5 · Cited by 318
Biodegradable polymers for industrial applications
(2005) · CRC Press eBooks · doi:10.1201/9781439823699 · Cited by 314
Compatibilization of Immiscible Poly(propylene)/Polystyrene Blends Using Clay
Wang, Y., Zhang, Q., & Fu, Q. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200390026 · Cited by 299
Binary and ternary blends of polylactide, polycaprolactone and thermoplastic starch
Sarazin, P., Li, G., Orts, W. J., & Favis, B. D. (2008) · Polymer · doi:10.1016/j.polymer.2007.11.029 · Cited by 298
Chow, W. S., Mohd Ishak, Z. A., Karger-Kocsis, J., Apostolov, A. A., & Ishiaku, U. S. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.006 · Cited by 291
Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends
López‐Rodríguez, N., López‐Arraiza, A., Meaurio, E., & Sarasua, J. R. (2006) · Polymer Engineering & Science · doi:10.1002/pen.20609 · Cited by 289
Selective Enzymatic Degradations of Poly(l-lactide) and Poly(ε-caprolactone) Blend Films
Liu, L., Li, S., Garreau, H., & Vert, M. (2000) · Biomacromolecules · doi:10.1021/bm000046k · Cited by 272
Wu, D., Wu, L., Zhang, M., & Zhao, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.05.001 · Cited by 256
Self-citationBiodegradable polymers for industrial applications
Smith, R. (2005) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845690762 · Cited by 249
Rheology and dynamics of immiscible polymer blends
Lee, H. M., & Park, O. O. (1994) · Journal of Rheology · doi:10.1122/1.550551 · Cited by 222
Na, Y.-H., He, Y., Shuai, X., Kikkawa, Y., Doi, Y., & Inoue, Y. (2002) · Biomacromolecules · doi:10.1021/bm020050r · Cited by 219
Enzymatic degradation of poly(ε-caprolactone)/poly(dl-lactide) blends in phosphate buffer solution
Gan, Z., Yu, D., Zhong, Z., Liang, Q., & Jing, X. (1999) · Polymer · doi:10.1016/s0032-3861(98)00549-7 · Cited by 217
Phase behavior and its viscoelastic response of polylactide/poly(ε-caprolactone) blend
Wu, D., Zhang, Y., Zhang, M., & Zhou, W. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.04.023 · Cited by 213
Self-citationSarazin, P., Roy, X., & Favis, B. D. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.01.065 · Cited by 210
Novel morphologies of poly(phenylene oxide) (PPO)/polyamide 6 (PA6) blend nanocomposites
Li, Y., & Shimizu, H. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.018 · Cited by 210
Shi, X., Hudson, J. L., Spicer, P. P., Tour, J. M., Krishnamoorti, R., & Mikos, A. G. (2006) · Biomacromolecules · doi:10.1021/bm060391v · Cited by 176
Deformation and damage upon stretching of degradable polymers (PLA and PCL)
Rezgui, F., Swistek, M., Hiver, J. M., G'Sell, C., & Sadoun, T. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.116 · Cited by 171
Wu, D., Wu, L., Sun, Y., & Zhang, M. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21309 · Cited by 169
Self-citationInterfacial tension reduction in PBT/PE/clay nanocomposite
Hong, J. S., Kim, Y. K., Ahn, K. H., Lee, S. J., & Kim, C. (2007) · Rheologica Acta · doi:10.1007/s00397-006-0123-1 · Cited by 167
Sinha Ray, S., & Bousmina, M. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200500447 · Cited by 162
Mei, F., Zhong, J., Yang, X., Ouyang, X., Zhang, S., Hu, X., Ma, Q., Lu, J., Ryu, S., & Deng, X. (2007) · Biomacromolecules · doi:10.1021/bm7006295 · Cited by 160
Co‐continuous Polyamide 6 (PA6)/Acrylonitrile‐Butadiene‐Styrene (ABS) Nanocomposites
Li, Y., & Shimizu, H. (2005) · Macromolecular Rapid Communications · doi:10.1002/marc.200400654 · Cited by 154
Ishiaku, U. S., Pang, K. W. P., Lee, W. S., & Ishak, Z. A. M. (2002) · European Polymer Journal · doi:10.1016/s0014-3057(01)00125-2 · Cited by 141
Isothermal Crystallization of Poly(ε-caprolactone−ethylene glycol) Block Copolymers
Bogdanov, B. G., Vidts, A., Schacht, E. H., & Berghmans, H. (1999) · Macromolecules · doi:10.1021/ma980226a · Cited by 116
Rheology of multi‐walled carbon nanotube/poly(butylene terephthalate) composites
Wu, D., Wu, L. K., & Zhang, M. (2007) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21233 · Cited by 114
Self-citationShi, X. C., Hudson, J. L., Spicer, P. P., Tour, J. M., Krishnamoorti, R., & Mikos, A. G. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/7/030 · Cited by 113
Eastmond, G. C. (1999) · Advances in polymer science · doi:10.1007/3-540-48838-3_2 · Cited by 112
Compatibilized poly(-caprolactone)/poly(L-lactide) blends for biomedical uses
Maglio, G., Migliozzi, A., Palumbo, R., Immirzi, B., & Volpe, M. G. (1999) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(19990401)20:4<236::aid-marc236>3.0.co;2-v · Cited by 112
Use of carbon nanotube filled polycarbonate in blends with montmorillonite filled polypropylene
Pötschke, P., Kretzschmar, B., & Janke, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.02.034 · Cited by 109
Li, S., Liu, L., Garreau, H., & Vert, M. (2003) · Biomacromolecules · doi:10.1021/bm025748j · Cited by 108
Tsuji, H., & Ishizaka, T. (2001) · Macromolecular Bioscience · Cited by 77
Clay locked phase morphology in the PPS/PA66/clay blends during compounding in an internal mixer
Zou, H., Zhang, Q., Tan, H. S., Wang, K., Du, R., & Fu, Q. (2005) · Polymer · doi:10.1016/j.polymer.2005.11.031 · Cited by 54
Xie, W., Zhu, W., & Shen, Z. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.021 · Cited by 53
Wu, D., Wu, L., Zhang, M., Zhou, W., & Zhang, Y. (2008) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21461 · Cited by 47
Self-citationRoy, X., Sarazin, P., & Favis, B. D. (2006) · Advanced Materials · doi:10.1002/adma.200501210 · Cited by 47
Location-selective incorporation of multiwalled carbon nanotubes in polycarbonate microspheres
Jung, R., Park, W. I., Kwon, S., Kim, H., & Jin, H. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.045 · Cited by 29
Compatibility of Triblock Copolymers in an A/B/Copolymer Ternary Mixture
Liang, H. (1999) · Macromolecules · doi:10.1021/ma990563z · Cited by 15
Composition dependence of rheological properties of polymer blends
Han, S. S., Moon, T. J., Bae, Y. C., Yi, S., & Lee, S. H. (1998) · Polymer · doi:10.1016/s0032-3861(97)00327-3 · Cited by 7
Cited by
Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties
Spitalsky, Z., Tasis, D., Papagelis, K., & Galiotis, C. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.09.003 · Cited by 3,125
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Compatibilization strategies in poly(lactic acid)-based blends
Zeng, J.-B., Li, K.-A., & Du, A.-K. (2015) · RSC Advances · doi:10.1039/c5ra01655j · Cited by 290
Metadata
- Authors
- Wu, D., Zhang, Y., Zhang, M., & Yu, W.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-01-13
- Volume
- 10
- Issue
- 2
- Pages
- 417-424
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2026616526
- Cited by
- 372
- References
- 48
- FWCI
- 12.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.