Biodegradable Shape-Memory Polymers Exhibiting Sharp Thermal Transitions and Controlled Drug Release
The DOI matches its Crossref record; 25 of the 26 references it cites were found in a registry or an index.
Abstract
Biodegradable shape-memory polymer networks prepared by cross-linking star shape branched oligo(ε-caprolactone) (bOCL) with hexamethylene diisocyanate are introduced. The thermal and mechanical properties of these networks were investigated using differential scanning calorimetry and tensile testing, respectively, and the morphology of the phase structure was characterized by polarized optical microscopy. The shape-memory properties of the networks were quantified using thermomechanical tensile experiments and showed strain fixity rates R(f) higher than 97% and strain recovery rates R(r) as high as 100%. Of note, networks of OCL segments with a lower degree of polymerization (DP; 10) exhibited significantly improved temperature-sensitive shape recovery: 90% of the permanent shape was recovered upon heating to within a 2 °C range (37-39 °C). The networks exhibited complete shape recovery to the permanent shape within 10 s at 42 °C. Theophylline-loaded (10 and 20 wt %) shape-memory materials, prepared by cross-linking bOCL with hexamethylene diisocyanate in the presence of theophylline, are also described as a model for a controlled drug release device. The 10 wt % loaded material was sufficiently soft and flexible for complex shape transformation and also showed high R(f) (98%) and R(r) (99%). Sustained release of loaded theophylline was achieved over 1 month without initial burst-release in a phosphate buffer solution (PBS; pH 7.4) at 37 °C.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“After an initial release of 20% of the loaded drug in the first day, a smooth subsequent release profile was observed over 5 weeks (Figure 9B).”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [132]
In the citing paper
“So far, controlled drug release has been established for covalent SMP networks that were based on different chemistries: PCGDMA as telechelics that were cross-linked by photo polymerization [46,137], oligo[(rac-lactide)-co-glycolide]tetroles (oLG) cross-linked by lowmolecular-weight aliphatic diisocyanates [131,138], and branched oligo(e-caprolactone)octols (oCl) cross-linked by low-molecular”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [132]
In the citing paper
“In this material, drug loading resulted in a slight increase in the melting temperature of PCL segments, which was assumed to derive from a drug-induced phase separation with an improved interaction and crystallization of PCL segments.”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [132]
In the citing paper
“Drug incorporation by suspension before cross-linking was also described for semicrystalline PCL-derived networks, and lead to a homogeneous distribution of drug aggregates (Figure 9A) [132].”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [132]
Citations
Cites
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
Yakacki, C. M., Shandas, R., Lanning, C., Rech, B., Eckstein, A., & Gall, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.030 · Cited by 618
Shape-memory materials and hybrid composites for smart systems: Part I Shape-memory materials
Wei, Z. G., Sandstroröm, R., & Miyazaki, S. (1998) · Journal of Materials Science · doi:10.1023/a:1004692329247 · Cited by 574
Shape Memory Materials for Biomedical Applications
El Feninat, F., Laroche, G., Fiset, M., & Mantovani, D. (2002) · Advanced Engineering Materials · doi:10.1002/1527-2648(200203)4:3<91::aid-adem91>3.0.co;2-b · Cited by 458
Poly(ε-caprolactone) Polyurethane and Its Shape-Memory Property
Ping, P., Wang, W., Chen, X., & Jing, X. (2005) · Biomacromolecules · doi:10.1021/bm049477j · Cited by 354
Thermomechanics of the shape memory effect in polymers for biomedical applications
Gall, K., Yakacki, C. M., Liu, Y., Shandas, R., Willett, N., & Anseth, K. S. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30296 · Cited by 351
Cold hibernated elastic memory foams for endovascular interventions
Metcalfe, A., Desfaits, A.-C., Salazkin, I., Yahia, L., Sokolowski, W. M., & Raymond, J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00362-9 · Cited by 307
Laser-activated shape memory polymer intravascular thrombectomy device
Small IV, W., Wilson, T. S., Benett, W. J., Loge, J. M., & Maitland, D. J. (2005) · Optics Express · doi:10.1364/opex.13.008204 · Cited by 265
Biodegradable, Amorphous Copolyester‐Urethane Networks Having Shape‐Memory Properties
Alteheld, A., Feng, Y., Kelch, S., & Lendlein, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200461360 · Cited by 237
Polylactide-based polyurethane and its shape-memory behavior
Wang, W., Ping, P., Chen, X., & Jing, X. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.11.029 · Cited by 212
Choi, Y. K., Bae, Y. H., & Kim, S. W. (1998) · Macromolecules · doi:10.1021/ma981069i · Cited by 200
Biodegradable stents with elastic memory
Venkatraman, S. S., Tan, L. P., Joso, J. F. D., Boey, Y. C. F., & Wang, X. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.09.002 · Cited by 178
Synthesis of polylactides in the presence of co-initiators with different numbers of hydroxyl groups
Korhonen, H., Helminen, A., & Seppälä, J. V. (2001) · Polymer · doi:10.1016/s0032-3861(01)00150-1 · Cited by 160
(2005) · PubMed · Cited by 155
Mechanical Properties of Mechanical Actuator for Treating Ischemic Stroke
Metzger, M. F., Wilson, T. S., Schumann, D., Matthews, D. L., & Maitland, D. J. (2002) · Biomedical Microdevices · doi:10.1023/a:1014674912979 · Cited by 145
Numata, K., Srivastava, R. K., Finne‐Wistrand, A., Albertsson, A., Doi, Y., & Abe, H. (2007) · Biomacromolecules · doi:10.1021/bm700537x · Cited by 133
Controlled Synthesis of Star-Shaped l-Lactide Polymers Using New Spirocyclic Tin Initiators
Finne, A., & Albertsson, A.-C. (2002) · Biomacromolecules · doi:10.1021/bm020009o · Cited by 123
Shape Memory of Hydrogen-Bonded Polymer Network/Poly(ethylene glycol) Complexes
Liu, G., Ding, X., Cao, Y., Zheng, Z., & Peng, Y. (2004) · Macromolecules · doi:10.1021/ma035717w · Cited by 119
Degradable shape-memory polymer networks from oligo[(l-lactide)-ran-glycolide]dimethacrylates
Choi, N.-Y., & Lendlein, A. (2007) · Soft Matter · doi:10.1039/b702515g · Cited by 110
Shape Memory Behavior of Novel ( l -Lactide−Glycolide−Trimethylene Carbonate) Terpolymers
Zini, E., Scandola, M., Dobrzyński, P., Kasperczyk, J., & Bero, M. (2007) · Biomacromolecules · doi:10.1021/bm700773s · Cited by 109
Li, Y., & Kissel, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10362-7 · Cited by 79
Synthesis of Novel Comb-Type Polylactide and Its Biodegradability
Tasaka, F., Ohya, Y., & Ouchi, T. (2001) · Macromolecules · doi:10.1021/ma010067m · Cited by 74
Self-citationLuo, H., Liu, Y., Yu, Z., Zhang, S., & Li, B. (2008) · Biomacromolecules · doi:10.1021/bm8004726 · Cited by 71
Structure and mechanical properties of shape memory polyurethane based on hyperbranched polyesters
Cao, Q., & Liu, P. (2006) · Polymer Bulletin · doi:10.1007/s00289-006-0650-z · Cited by 56
Research works printed but not linked: 3
- Lendlein A., 2005, Clin. Hemorheol. Microcirc., 32, 105
- Lendlein A., 2002, Angew. Chem., Int. Ed., 41, 2034, 10.1002/1521-3773(20020617)41:12<2034::AID-ANIE2034>3.0.CO;2-M · doi:10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m
- Lendlein A., 2001, Proc. Natl. Acad. Sci. U.S.A., 98, 842
Cited by
A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications
Xia, Y., He, Y., Zhang, F., Liu, Y., & Leng, J. (2021) · Advanced Materials · doi:10.1002/adma.202000713 · Cited by 1,281
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Multifunctional Shape‐Memory Polymers
Behl, M., Razzaq, M. Y., & Lendlein, A. (2010) · Advanced Materials · doi:10.1002/adma.200904447 · Cited by 971
A review of stimuli-responsive polymers for smart textile applications
Hu, J., Meng, H., Li, G., & Ibekwe, S. I. (2012) · Smart Materials and Structures · doi:10.1088/0964-1726/21/5/053001 · Cited by 639
Shape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
Metadata
- Authors
- Nagahama, K., Ueda, Y., Ouchi, T., & Ohya, Y.
- Affiliations
- Kansai University (JP)
- Corresponding author
- Ohya, Yuichi
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-05-08
- Volume
- 10
- Issue
- 7
- Pages
- 1789-1794
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1988423180
- Cited by
- 124
- References
- 26
- Citations by year
- 2026: 1 · 2025: 4 · 2024: 4 · 2022: 2 · 2021: 8 · 2020: 10 · 2019: 14 · 2017: 9 · 2016: 7 · 2015: 15 · 2014: 8 · 2013: 7 · 2012: 13
- FWCI
- 9.80
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education, Culture, Sports, Science and Technology
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- controlled drug release, theophylline, shape recovery, degree of polymerization, sustained drug release
- MeSH terms
- Caproates, Cyanates, Delayed-Action Preparations, Hot Temperature, Lactones, Materials Testing, Polymers, Theophylline, Isocyanates, Phase Transition, Mechanical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.