Biodegradable Shape-Memory Polymers Exhibiting Sharp Thermal Transitions and Controlled Drug Release
The DOI matches its Crossref record; 25 of the 26 references it cites were found in a registry or an index.
Abstract
Biodegradable shape-memory polymer networks prepared by cross-linking star shape branched oligo(ε-caprolactone) (bOCL) with hexamethylene diisocyanate are introduced. The thermal and mechanical properties of these networks were investigated using differential scanning calorimetry and tensile testing, respectively, and the morphology of the phase structure was characterized by polarized optical microscopy. The shape-memory properties of the networks were quantified using thermomechanical tensile experiments and showed strain fixity rates R(f) higher than 97% and strain recovery rates R(r) as high as 100%. Of note, networks of OCL segments with a lower degree of polymerization (DP; 10) exhibited significantly improved temperature-sensitive shape recovery: 90% of the permanent shape was recovered upon heating to within a 2 °C range (37-39 °C). The networks exhibited complete shape recovery to the permanent shape within 10 s at 42 °C. Theophylline-loaded (10 and 20 wt %) shape-memory materials, prepared by cross-linking bOCL with hexamethylene diisocyanate in the presence of theophylline, are also described as a model for a controlled drug release device. The 10 wt % loaded material was sufficiently soft and flexible for complex shape transformation and also showed high R(f) (98%) and R(r) (99%). Sustained release of loaded theophylline was achieved over 1 month without initial burst-release in a phosphate buffer solution (PBS; pH 7.4) at 37 °C.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“After an initial release of 20% of the loaded drug in the first day, a smooth subsequent release profile was observed over 5 weeks (Figure 9B).”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [132]
In the citing paper
“So far, controlled drug release has been established for covalent SMP networks that were based on different chemistries: PCGDMA as telechelics that were cross-linked by photo polymerization [46,137], oligo[(rac-lactide)-co-glycolide]tetroles (oLG) cross-linked by lowmolecular-weight aliphatic diisocyanates [131,138], and branched oligo(e-caprolactone)octols (oCl) cross-linked by low-molecular”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [132]
In the citing paper
“In this material, drug loading resulted in a slight increase in the melting temperature of PCL segments, which was assumed to derive from a drug-induced phase separation with an improved interaction and crystallization of PCL segments.”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [132]
In the citing paper
“Drug incorporation by suspension before cross-linking was also described for semicrystalline PCL-derived networks, and lead to a homogeneous distribution of drug aggregates (Figure 9A) [132].”
From Shape-memory polymers as a technology platform for biomedical applications (2010) · cites this paper as [132]
Citations
Cites
Lendlein, A., & Kelch, S. (2002) · Kirk-Othmer Encyclopedia of Chemical Technology · doi:10.1002/0471238961.1908011612051404.a01 · Cited by 2,566
Biodegradable, Elastic Shape-Memory Polymers for Potential Biomedical Applications
Lendlein, A., & Langer, R. (2002) · Science · doi:10.1126/science.1066102 · Cited by 2,146
Yakacki, C. M., Shandas, R., Lanning, C., Rech, B., Eckstein, A., & Gall, K. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.030 · Cited by 618
Shape-memory materials and hybrid composites for smart systems: Part I Shape-memory materials
Wei, Z. G., Sandstroröm, R., & Miyazaki, S. (1998) · Journal of Materials Science · doi:10.1023/a:1004692329247 · Cited by 574
Shape Memory Materials for Biomedical Applications
El Feninat, F., Laroche, G., Fiset, M., & Mantovani, D. (2002) · Advanced Engineering Materials · doi:10.1002/1527-2648(200203)4:3<91::aid-adem91>3.0.co;2-b · Cited by 458
Poly(ε-caprolactone) Polyurethane and Its Shape-Memory Property
Ping, P., Wang, W., Chen, X., & Jing, X. (2005) · Biomacromolecules · doi:10.1021/bm049477j · Cited by 354
Thermomechanics of the shape memory effect in polymers for biomedical applications
Gall, K., Yakacki, C. M., Liu, Y., Shandas, R., Willett, N., & Anseth, K. S. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30296 · Cited by 351
Cold hibernated elastic memory foams for endovascular interventions
Metcalfe, A., Desfaits, A.-C., Salazkin, I., Yahia, L., Sokolowski, W. M., & Raymond, J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00362-9 · Cited by 307
Laser-activated shape memory polymer intravascular thrombectomy device
Small IV, W., Wilson, T. S., Benett, W. J., Loge, J. M., & Maitland, D. J. (2005) · Optics Express · doi:10.1364/opex.13.008204 · Cited by 265
Biodegradable, Amorphous Copolyester‐Urethane Networks Having Shape‐Memory Properties
Alteheld, A., Feng, Y., Kelch, S., & Lendlein, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200461360 · Cited by 237
Research works printed but not linked: 3
- Lendlein A., 2005, Clin. Hemorheol. Microcirc., 32, 105
- Lendlein A., 2002, Angew. Chem., Int. Ed., 41, 2034, 10.1002/1521-3773(20020617)41:12<2034::AID-ANIE2034>3.0.CO;2-M · doi:10.1002/1521-3773(20020617)41:12<2034::aid-anie2034>3.0.co;2-m
- Lendlein A., 2001, Proc. Natl. Acad. Sci. U.S.A., 98, 842
Cited by
A Review of Shape Memory Polymers and Composites: Mechanisms, Materials, and Applications
Xia, Y., He, Y., Zhang, F., Liu, Y., & Leng, J. (2021) · Advanced Materials · doi:10.1002/adma.202000713 · Cited by 1,281
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Multifunctional Shape‐Memory Polymers
Behl, M., Razzaq, M. Y., & Lendlein, A. (2010) · Advanced Materials · doi:10.1002/adma.200904447 · Cited by 971
A review of stimuli-responsive polymers for smart textile applications
Hu, J., Meng, H., Li, G., & Ibekwe, S. I. (2012) · Smart Materials and Structures · doi:10.1088/0964-1726/21/5/053001 · Cited by 639
Shape-memory polymers as a technology platform for biomedical applications
Lendlein, A., Behl, M., Hiebl, B., & Wischke, C. (2010) · Expert Review of Medical Devices · doi:10.1586/erd.10.8 · Cited by 469
Cameron, D. J. A., & Shaver, M. P. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00091d · Cited by 421
Star polymers: Advances in biomedical applications
Wu, W., Wang, W., & Li, J. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.02.002 · Cited by 407
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Various shape memory effects of stimuli-responsive shape memory polymers
Meng, H., Mohamadian, H., Stubblefield, M., Jerro, D., Ibekwe, S., Pang, S.-S., & Li, G. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/9/093001 · Cited by 257
Meng, H., & Hu, J. (2010) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x10369718 · Cited by 254
Polymers with Dual Light-Triggered Functions of Shape Memory and Healing Using Gold Nanoparticles
Zhang, H., & Zhao, Y. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am404087q · Cited by 217
Perspective: Ionomer Research and Applications
Zhang, L., Brostowitz, N. R., Cavicchi, K. A., & Weiss, R. A. (2014) · Macromolecular Reaction Engineering · doi:10.1002/mren.201300181 · Cited by 212
Biodegradable Shape Memory Polymers in Medicine
Peterson, G. I., Dobrynin, A. V., & Becker, M. L. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700694 · Cited by 206
The contemporary role of ε-caprolactone chemistry to create advanced polymer architectures
Sisson, A. L., Ekinci, D., & Lendlein, A. (2013) · Polymer · doi:10.1016/j.polymer.2013.04.045 · Cited by 190
Shape-Memory Polymers with Adjustable High Glass Transition Temperatures
Xiao, X., Kong, D., Qiu, X., Zhang, W., Zhang, F., Liu, L., Liu, Y., Zhang, S., Hu, Y., & Leng, J. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00654 · Cited by 186
Melocchi, A., Inverardi, N., Uboldi, M., Baldi, F., Maroni, A., Pandini, S., Briatico-Vangosa, F., Zema, L., & Gazzaniga, A. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.01.045 · Cited by 186
High temperature electromagnetic shielding shape memory polymer composite
Kong, D., Li, J., Guo, A., & Xiao, X. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127365 · Cited by 183
Recent Insights Into the Biomedical Applications of Shape‐memory Polymers
Serrano, M. C., & Ameer, G. A. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201200097 · Cited by 162
Zhang, H., Xia, H., & Zhao, Y. (2012) · J. Mater. Chem. · doi:10.1039/c1jm14615g · Cited by 154
Le, D. M., Kulangara, K., Adler, A. F., Leong, K. W., & Ashby, V. S. (2011) · Advanced Materials · doi:10.1002/adma.201100821 · Cited by 149
Review of Polymeric Materials in 4D Printing Biomedical Applications
Shie, M., Shen, Y., Astuti, S. D., Lee, A. K.-X., Lin, S.-H., Dwijaksara, N. L. B., & Chen, Y. (2019) · Polymers · doi:10.3390/polym11111864 · Cited by 159
Review on the Functional Determinants and Durability of Shape Memory Polymers
Pretsch, T. (2010) · Polymers · doi:10.3390/polym2030120 · Cited by 138
“With this concept in mind, biodegradable SMPs based on poly(DL-lactide) and PCL [78,148, 244-249], blends based on poly(L-lactide-co-ε-caprolactone) and poly(L-lactide-co-glycolide) [250], SMPs based on bile acids [251,252] and many others [253-257] have been synthesized.”
MethodReview of Adaptive Programmable Materials and Their Bioapplications
Fan, X., Chung, J. Y., Lim, Y. X., Li, Z., & Loh, X. J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09110 · Cited by 143
Shape memory polymers with high and low temperature resistant properties
Xiao, X., Kong, D., Qiu, X., Zhang, W., Liu, Y., Zhang, S., Zhang, F., Hu, Y., & Leng, J. (2015) · Scientific Reports · doi:10.1038/srep14137 · Cited by 137
Degradable, Multifunctional Cardiovascular Implants: Challenges and Hurdles
Jung, F., Wischke, C., & Lendlein, A. (2010) · MRS Bulletin · doi:10.1557/mrs2010.529 · Cited by 121
Reversible switching transitions of stimuli-responsive shape changing polymers
Meng, H., & Li, G. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10716g · Cited by 126
Xiao, R., & Huang, W. (2020) · Macromolecular Bioscience · doi:10.1002/mabi.202000108 · Cited by 119
Shape memory materials and 4D printing in pharmaceutics
Melocchi, A., Uboldi, M., Cerea, M., Foppoli, A., Maroni, A., Moutaharrik, S., Palugan, L., Zema, L., & Gazzaniga, A. (2021) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2021.03.013 · Cited by 118
Polymer design for high temperature shape memory: Low crosslink density polyimides
Koerner, H., Strong, R. J., Smith, M. L., Wang, D. H., Tan, L., Lee, K. M., White, T. J., & Vaia, R. A. (2012) · Polymer · doi:10.1016/j.polymer.2012.11.007 · Cited by 115
Melly, S. K., Liu, L., Liu, Y., & Leng, J. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04761-w · Cited by 119
Recommendations and Considerations for the Use of Biologics in Orthopedic Surgery
Zwingenberger, S., Nich, C., Valladares, R. D., Yao, Z., Stiehler, M., & Goodman, S. B. (2012) · BioDrugs · doi:10.1007/bf03261883 · Cited by 125
Shape-Memory Polymers as Drug Carriers—A Multifunctional System
Wischke, C., & Lendlein, A. (2010) · Pharmaceutical Research · doi:10.1007/s11095-010-0062-5 · Cited by 112
Star-shaped POSS-polycaprolactone polyurethanes and their shape memory performance
Mya, K. Y., Gose, H. B. A. S., Pretsch, T., Bothe, M., & He, C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04459h · Cited by 102
Ahn, S., Deshmukh, P. H., & Kasi, R. M. (2010) · Macromolecules · doi:10.1021/ma101145r · Cited by 101
Biocompatible Shape Memory Blend for Self-Expandable Stents with Potential Biomedical Applications
Zheng, Y., Li, Y., Hu, X. F., Shen, J., & Guo, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b04808 · Cited by 89
3D printing for drug manufacturing: A perspective on the future of pharmaceuticals
Lepowsky, E., & Taşoğlu, S. (2017) · International Journal of Bioprinting · doi:10.18063/ijb.v1i1.119 · Cited by 103
Kang, H., Li, M., Tang, Z., Xue, J., Hu, X., Zhang, L., & Guo, B. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb01304b · Cited by 85
High Cycle-life Shape Memory Polymer at High Temperature
Kong, D., & Xiao, X. (2016) · Scientific Reports · doi:10.1038/srep33610 · Cited by 81
Branched aliphatic polyesters by ring-opening (co)polymerization
Bednarek, M. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.02.002 · Cited by 79
Sezer, A. D. (2016) · InTech eBooks · doi:10.5772/60475 · Cited by 81
Ahn, S.-K., Deshmukh, P., Gopinadhan, M., Osuji, C. O., & Kasi, R. M. (2011) · ACS Nano · doi:10.1021/nn200211c · Cited by 74
Controlled Drug Release from Biodegradable Shape-Memory Polymers
Wischke, C., Neffe, A. T., & Lendlein, A. (2009) · Advances in polymer science · doi:10.1007/12_2009_29 · Cited by 76
Zhang, Z., Dou, J.-X., He, J.-H., Xiao, C.-X., Shen, L.-Y., Yang, J., Wang, Y., & Zhou, Z. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00828g · Cited by 73
Optically transparent high temperature shape memory polymers
Xiao, X., Qiu, X., Kong, D., Zhang, W., Liu, Y., & Leng, J. (2015) · Soft Matter · doi:10.1039/c5sm02703a · Cited by 71
Bil, M., Kijeńska‐Gawrońska, E., Głodkowska‐Mrówka, E., Manda‐Handzlik, A., & Mrówka, P. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.110675 · Cited by 69
Sulfonated Poly(ether ether ketone) Ionomers and Their High Temperature Shape Memory Behavior
Shi, Y., & Weiss, R. A. (2014) · Macromolecules · doi:10.1021/ma500119k · Cited by 69
Gao, H. T., Lan, X., Liu, L., Xiao, X., Liu, Y., & Leng, J. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa7bd7 · Cited by 64
Biodegradable Polymeric Assemblies for Biomedical Materials
Ohya, Y., Takahashi, A., & Nagahama, K. (2011) · Advances in polymer science · doi:10.1007/12_2011_160 · Cited by 59
Self-citationMatsumoto, H., Ishiguro, T., Konosu, Y., Minagawa, M., Tanioka, A., Richau, K., Kratz, K. L., & Lendlein, A. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.07.008 · Cited by 57
Sanaka, R., Sahu, S. K., Sreekanth, P. S. R., Krishnasamy, S., Badgayan, N. D., Siva, B. V., & Ma, Q. (2024) · Journal of Composites Science · doi:10.3390/jcs8080324 · Cited by 53
Bio-based UV curable polyurethane acrylate: Morphology and shape memory behaviors
Khasraghi, S. S., Shojaei, A., & Sundararaj, U. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.06.019 · Cited by 55
Biomedical applications of shape-memory polymers: how practically useful are they?
Wong, Y., Kong, J. F., Widjaja, L. K., & Venkatraman, S. S. (2014) · Science China Chemistry · doi:10.1007/s11426-013-5061-z · Cited by 56
Zhang, F., Zhang, Z., Zhou, T., Liu, Y., & Leng, J. (2015) · Frontiers in Materials · doi:10.3389/fmats.2015.00062 · Cited by 47
Niu, Y., Zhang, P., Zhang, J., Xiao, L., Yang, K., & Wang, Y. (2012) · Polymer Chemistry · doi:10.1039/c2py20311a · Cited by 45
Wischke, C., Neffe, A. T., Steuer, S., & Lendlein, A. (2010) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2010.06.003 · Cited by 46
Novel design approaches for multifunctional information carriers
Ecker, M., & Pretsch, T. (2014) · RSC Adv. · doi:10.1039/c4ra08977d · Cited by 41
Application of responsive polymers in implantable medical devices and biosensors
Li, J., Stachowski, M., & Zhang, Z. (2015) · Elsevier eBooks · doi:10.1016/b978-0-85709-713-2.00011-0 · Cited by 49
Thermal Responsive Shape Memory Polymers for Biomedical Applications
Xu, J., & Song, J. (2011) · InTech eBooks · doi:10.5772/19256 · Cited by 47
A stimuli-responsive coaxial nanofilm for burst release
İnce, G. Ö., Gleason, K. K., & Demirel, M. C. (2010) · Soft Matter · doi:10.1039/c0sm00922a · Cited by 40
Lee, J., & Kang, S. (2021) · Micromachines · doi:10.3390/mi12070757 · Cited by 44
Shape memory polymers: properties, synthesis and applications
Peponi, L., Navarro-Baena, I., & Kenny, J. M. (2014) · Smart Polymers and their Applications · doi:10.1533/9780857097026.1.204 · Cited by 38
Shape memory behaviour of HA-g-PDLLA nanocomposites prepared via in situ polymerization
Du, K., & Gan, Z. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21861a · Cited by 38
Laser-triggered shape memory based on thermoplastic and thermoset matrices with silver nanoparticles
Yenpech, N., Intasanta, V., & Chirachanchai, S. (2019) · Polymer · doi:10.1016/j.polymer.2019.121792 · Cited by 38
Ruan, C., Wang, Y., Zhang, M., Luo, Y., Fu, C., Huang, M., Sun, J., & Hu, C. (2011) · Polymer International · doi:10.1002/pi.3197 · Cited by 37
Wischke, C., Neffe, A. T., Steuer, S., Engelhardt, E., & Lendlein, A. (2010) · Macromolecular Bioscience · doi:10.1002/mabi.201000089 · Cited by 37
Advances in Physiologically Relevant Actuation of Shape Memory Polymers for Biomedical Applications
Sun, L., Gao, X., Wu, D., & Guo, Q. (2020) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2020.1825487 · Cited by 35
Shape-memory materials and their clinical applications
Sarvari, R., Keyhanvar, P., Agbolaghi, S., Farashah, M. S. G., Sadrhaghighi, A., Nouri, M., & Roshangar, L. (2020) · International Journal of Polymeric Materials · doi:10.1080/00914037.2020.1833010 · Cited by 36
Tunable and processable shape memory composites based on degradable polymers
Zhang, X., Geven, M. A., Grijpma, D. W., Peijs, T., & Gautrot, J. E. (2017) · Polymer · doi:10.1016/j.polymer.2017.06.066 · Cited by 35
Wischke, C., Behl, M., & Lendlein, A. (2013) · Expert Opinion on Drug Delivery · doi:10.1517/17425247.2013.797406 · Cited by 34
Shape memory polyurethanes containing azo exhibiting photoisomerization function
Zhang, Y., Wang, C., Pei, X., Wang, Q., & Wang, T. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01944e · Cited by 33
Hosseinnezhad, R., Vozniak, I., & Zaïri, F. (2021) · Polymers · doi:10.3390/polym13121900 · Cited by 30
Shou, Q., Uto, K., Lin, W., Aoyagi, T., & Ebara, M. (2014) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201400353 · Cited by 28
Kashif, M., Yun, B.-M., Lee, K., & Chang, Y. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.12.051 · Cited by 32
Zare, M., Parvin, N., Prabhakaran, M. P., Mohandesi, J. A., & Ramakrishna, S. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107874 · Cited by 28
Huang, X., Zhang, F., Liu, Y., & Leng, J. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab115f · Cited by 26
Biodegradable thermoset shape‐memory polymer developed from poly(β‐amino ester) networks
Lakhera, N., Laursen, C., Safranski, D. L., & Frick, C. P. (2012) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23059 · Cited by 25
Characterization of shape-memory polymers for biomedical applications
Dyamenahalli, K. U., Famili, A., & Shandas, R. (2015) · Elsevier eBooks · doi:10.1016/b978-0-85709-698-2.00003-9 · Cited by 36
Jose, S., George, J. J., Siengchin, S., & Parameswaranpillai, J. (2019) · Advanced structured materials · doi:10.1007/978-981-13-8574-2_1 · Cited by 25
Zhang, J., Wu, G., Huang, C., Niu, Y., Chen, C., Chen, Z., Yang, K., & Wang, Y. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp211953q · Cited by 22
Jahangiri, M., Kalajahi, A. E., Rezaei, M., & Bagheri, M. (2019) · Journal of Polymer Research · doi:10.1007/s10965-019-1798-1 · Cited by 23
Classification of Shape-Memory Polymers, Polymer Blends, and Composites
Strzelec, K., Sienkiewicz, N., & Szmechtyk, T. (2019) · Advanced structured materials · doi:10.1007/978-981-13-8574-2_2 · Cited by 28
Truong, T. T., Thai, S. H., Nguyên, H. T., Nguyen, T. H., & Nguyen, L.-T. T. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1643-z · Cited by 21
Shape-Memory Nanofiber Meshes with Programmable Cell Orientation
Niiyama, E., Tanabe, K., Uto, K., Kikuchi, A., & Ebara, M. (2019) · Fibers · doi:10.3390/fib7030020 · Cited by 25
Smart Delivery Systems with Shape Memory and Self-Folding Polymers
Erkeçoglu, S., Sezer, A. D., & Bucak, Ş. (2016) · InTech eBooks · doi:10.5772/62199 · Cited by 23
Niyonzima, I., Jiao, Y., & Fish, J. (2019) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2019.03.003 · Cited by 21
Dailing, E. A., Nair, D. P., Setterberg, W. K., Kyburz, K. A., Yang, C. F., D’Ovidio, T. J., Anseth, K. S., & Stansbury, J. W. (2015) · Polymer Chemistry · doi:10.1039/c5py01464f · Cited by 18
Petisco-Ferrero, S., Fernández, J., Martín, M. M. F. S., Ibarburu, P. A. S., & Oiz, J. R. S. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.04.027 · Cited by 18
Biodegradable Shape-Memory Polymers
Ruiz‐Rubio, L., Pérez‐Álvarez, L., & Vilas‐Vilela, J. L. (2019) · Advanced structured materials · doi:10.1007/978-981-13-8574-2_10 · Cited by 19
Biological Smart Biomaterials: Materials for Biomedical Applications
Chowdhury, S., Jain, N., Waidi, Y. O., Barua, D. R., Das, S., Prasad, A., & Datta, S. (2024) · Springer eBooks · doi:10.1007/978-3-031-58327-8_11 · Cited by 21
Facile control of high temperature shape memory polymers
Qiu, X., Xiao, X., Kong, D., Zhang, W., & Ma, Z. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44902 · Cited by 15
Fan, G., Yang, H., Diao, Y., Tian, S., Yang, T., Sun, Q., Liu, C., Liu, X., Wang, Y., Shao, C., et al. (2020) · Materials Horizons · doi:10.1039/d0mh00657b · Cited by 14
Panraksa, P., Hamdallah, S. I., Yilmaz, O., Saokham, P., Rachtanapun, P., Qi, S., & Jantrawut, P. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.106534 · Cited by 12
Bio-based adenine-containing copolyimides with high switching temperatures and high-strain storage
Tan, W., Lv, J., Li, R., Hu, J., Zeng, K., & Yang, G. (2022) · Molecular Systems Design & Engineering · doi:10.1039/d2me00031h · Cited by 12
Shape memory effect on the formation of oxazoline and triazine rings of BCC/DGEBA copolymer
Ariraman, M., Ramachandran, S., & Alagar, M. (2015) · RSC Advances · doi:10.1039/c5ra10373h · Cited by 12
Optimized synthesis of hydroxypropyl cellulose-g-poly(ε-caprolactone) network
Jahangiri, M., Bagheri, M., Azhar, F. F., & Abbasi, F. (2015) · Journal of Polymer Research · doi:10.1007/s10965-015-0838-8 · Cited by 11
Shen, T., Lu, M., Zhou, D., & Liang, L. (2012) · Iranian Polymer Journal · doi:10.1007/s13726-012-0031-4 · Cited by 12
Ghobadi, E., Heuchel, M., Kratz, K. L., & Lendlein, A. (2012) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.2012.10440 · Cited by 11
Ebara, M., Kotsuchibashi, Y., Uto, K., Aoyagi, T., Kim, Y., Narain, R., Idota, N., & Hoffman, J. M. (2014) · NIMS monographs · doi:10.1007/978-4-431-54400-5_7 · Cited by 11
Multi-Material Production of 4D Shape Memory Polymer Composites
Nyabadza, A., Kane, J., Vázquez, M., Sreenilayam, S. P., & Brabazon, D. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819724-0.00057-4 · Cited by 14
Shape Morphable Soft Machines and Systems Enabled by Responsive Advanced Materials
Jaiswal, S., Dhand, C., & Dwivedi, N. (2025) · Small Methods · doi:10.1002/smtd.202501019 · Cited by 10
Metadata
- Authors
- Nagahama, K., Ueda, Y., Ouchi, T., & Ohya, Y.
- Affiliations
- Kansai University (JP)
- Corresponding author
- Ohya, Yuichi
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-05-08
- Volume
- 10
- Issue
- 7
- Pages
- 1789-1794
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1988423180
- Cited by
- 124
- References
- 26
- Citations by year
- 2026: 1 · 2025: 4 · 2024: 4 · 2022: 2 · 2021: 8 · 2020: 10 · 2019: 14 · 2017: 9 · 2016: 7 · 2015: 15 · 2014: 8 · 2013: 7 · 2012: 13
- FWCI
- 9.80
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education, Culture, Sports, Science and Technology
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- controlled drug release, theophylline, shape recovery, degree of polymerization, sustained drug release
- MeSH terms
- Caproates, Cyanates, Delayed-Action Preparations, Hot Temperature, Lactones, Materials Testing, Polymers, Theophylline, Isocyanates, Phase Transition, Mechanical Phenomena
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.