The DOI matches its Crossref record.
Characterization of the Degradation of Polylactic Acid Polymer in a Solid Substrate Environment
Abstract
Polylactic acid (PLA) polymer film was degraded in abiotic and biotic environments to understand the role of microbes in the degradation process of lactic acid based polymers. The degradation studies were conducted in a well-characterized biotic system, an abiotic system, a sterile aqueous system, and a desiccated environment maintained at 40, 50, and 60 degrees C. The combination of experiments in different environments isolated the distinct effect of microbes, water, and temperature on the morphological changes in the polymer during degradation. Due to lack of availability of radiolabeled PLA, various analytical techniques were applied to observe changes in the rate and/or mechanism of degradation. CO2 evolved, weight loss, and molecular weights were measured to evaluate the extent of degradation. X-ray diffraction and differential scanning calorimetry techniques monitored the morphological changes in the polymer. FTIR was used as a semiquantitative tool to gather information about the chemistry of the degradative process. Neither of the above analytical techniques indicated any difference in the rate or mechanism of degradation attributable to the presence of microorganisms. The extent of degradation increased at higher process temperatures. FTIR data were evaluated for significant statistical difference by t-test hypothesis. The results confirmed hydrolysis of ester linkage as the primary mechanism of degradation of PLA. On the basis of these data, a probable path of PLA degradation has been suggested.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The degradation of polylactic acid is contingent on many factors, including time, temperature, low-molecular-weight impurities, and catalyst concentration [27,55,56].”
From Synthesis and Biological Application of Polylactic Acid (2020) · cites this paper as [56]
Citations
Cites
Still being checked.
Cited by
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Biodegradable and compostable alternatives to conventional plastics
Song, J. H., Murphy, R. J., Narayan, R., & Davies, G. B. H. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0289 · Cited by 971
Lifetime prediction of biodegradable polymers
Laycock, B., Nikolić, M., Colwell, J. M., Gauthier, E., Halley, P., Bottle, S., & George, G. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.02.004 · Cited by 662
Abiotic and biotic environmental degradation of the bioplastic polymer poly(lactic acid): A review
Karamanlioglu, M., Preziosi, R., & Robson, G. D. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.01.009 · Cited by 636
Synthesis and Biological Application of Polylactic Acid
Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y. (2020) · Molecules · doi:10.3390/molecules25215023 · Cited by 492
“The degradation of polylactic acid is contingent on many factors, including time, temperature, low‐molecular‐weight impurities, and catalyst concentration [27,55,56].”
BackgroundPantani, R., & Sorrentino, A. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.01.005 · Cited by 315
Karamanlioglu, M., & Robson, G. D. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.07.004 · Cited by 301
Silver/poly (lactic acid) nanocomposites: preparation, characterization, and antibacterial activity
Shameli, K., Ahmad, M. B., Darroudi, M., Rahman, R. A., Jokar, M., Yunis, W. M. Z. W., & Ibrahim, N. A. (2010) · International Journal of Nanomedicine · doi:10.2147/ijn.s12007 · Cited by 291
Biodegradation of starch/polylactic acid/poly(hydroxyester-ether) composite bars in soil
Shogren, R. L., Doane, W. M., Garlotta, D., Lawton, J. W., & Willett, J. L. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00356-7 · Cited by 242
Biodegradation in Soil of PLA/PBAT Blends Compatibilized with Chain Extender
Palsikowski, P. A., Kuchnier, C. N., Pinheiro, I. F., & Morales, A. R. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-017-0951-3 · Cited by 247
Nanocomposites of poly(lactic acid) reinforced with cellulose nanofibrils
Qu, P., Gao, Y., Wu, G.-F., & Zhang, L.-P. (2010) · BioResources · doi:10.15376/biores.5.3.1811-1823 · Cited by 221
Novel silver-based nanoclay as an antimicrobial in polylactic acid food packaging coatings
Busolo, M. A., Fernandez, P., Ocio, M. J., & Lagaron, J. M. (2010) · Food Additives & Contaminants: Part A · doi:10.1080/19440049.2010.506601 · Cited by 206
Gore, P. M., & Kandasubramanian, B. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11260b · Cited by 191
Di Corato, R., Bigall, N. C., Ragusa, A., Dorfs, D., Genovese, A., Marotta, R., Manna, L., & Pellegrino, T. (2011) · ACS Nano · doi:10.1021/nn102761t · Cited by 178
Deformation and damage upon stretching of degradable polymers (PLA and PCL)
Rezgui, F., Swistek, M., Hiver, J. M., G'Sell, C., & Sadoun, T. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.116 · Cited by 171
Selective degradation of biodegradable blends in simulated laboratory composting
Tabasi, R. Y., & Ajji, A. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.07.020 · Cited by 164
Janorkar, A. V., Metters, A. T., & Hirt, D. E. (2004) · Macromolecules · doi:10.1021/ma049056u · Cited by 173
Castro‐Aguirre, E., Auras, R. A., Selke, S. E. M., Rubino, M. I., & Marsh, T. L. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.01.017 · Cited by 168
Poly(lactic acid)–multi-wall carbon nanotube conductive biopolymer nanocomposite vapour sensors
Kumar, B., Castro, M., & Feller, J. (2011) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2011.10.077 · Cited by 152
Rudnik, E., & Briassoulis, D. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0243-7 · Cited by 149
Ahmed, J., Mulla, M. Z., & Arfat, Y. A. (2016) · Food Control · doi:10.1016/j.foodcont.2016.05.013 · Cited by 150
Bioceramics for Tissue Engineering Applications – A Review
Oh, S., Oh, N., Appleford, M. R., & Ong, J. L. (2006) · American journal of biochemistry & biotechnology/American journal of biochemistry and biotechnology · doi:10.3844/ajbbsp.2006.49.56 · Cited by 143
Biodegradable biopolymers: Real impact to environment pollution
Pinaeva, L. G., & Носков, А. С. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.174445 · Cited by 155
Grima, S., Maurel, V. B., Feuilloley, P., & Silvestre, F. (2000) · Journal of Polymers and the Environment · doi:10.1023/a:1015297727244 · Cited by 127
The influence of the functional end groups on the properties of polylactide-based materials
Kost, B., Baśko, M., Bednarek, M., Socka, M., Kopka, B., Łapienis, G., Biela, T., Kubisa, P., & Brzeziński, M. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101556 · Cited by 124
Polylactic acid (PLA) membrane—significance, synthesis, and applications: a review
More, N., Avhad, M. S., Utekar, S., & More, A. P. (2022) · Polymer Bulletin · doi:10.1007/s00289-022-04135-z · Cited by 129
Patil, N. A., Gore, P. M., Prakash, N. J., Govindaraj, P., Yadav, R., Verma, V., Shanmugarajan, D., Patil, S. M., Kore, A., & Kandasubramanian, B. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129152 · Cited by 115
Karamanlioglu, M., Houlden, A., & Robson, G. D. (2014) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2014.09.006 · Cited by 120
Ahmed, J., Hiremath, N., & Jacob, H. (2016) · Journal of Food Science · doi:10.1111/1750-3841.13193 · Cited by 113
Fungal Degradation of Poly(l-lactide) in Soil and in Compost
Saadi, Z., Rasmont, A., César, G., Bewa, H., & Benguigui, L. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0399-9 · Cited by 108
GAO, H., WANG, Y., FAN, Y., & MA, J. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.06.010 · Cited by 106
Ketoprofen poly(lactide-co-glycolide) physical interaction
Blasi, P., Schoubben, A., Giovagnoli, S., Perioli, L., Ricci, M., & Rossi, C. R. (2007) · AAPS PharmSciTech · doi:10.1208/pt0802037 · Cited by 105
Palai, B., Mohanty, S., & Nayak, S. K. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02055-z · Cited by 100
Mandal, A., Meda, V., Zhang, W., Farhan, K. M., & Gnanamani, A. (2011) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2011.10.021 · Cited by 97
Plastic Biodegradation: Challenges and Opportunities
Wierckx, N. J. P., Narančić, T., Eberlein, C., Wei, R., Drzyzga, O., Magnin, A., Ballerstedt, H., Kenny, S. T., Pollet, É., Avérous, L., et al. (2018) · Springer eBooks · doi:10.1007/978-3-319-44535-9_23-1 · Cited by 110
New Insights into Polylactide Biodegradation from Molecular Ecological Techniques
Sangwan, P., & Wu, D. Y. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200700317 · Cited by 93
Musioł, M., Sikorska, W., Adamus, G., Janeczek, H., Richert, J., Malinowski, R., Jiang, G., & Kowalczuk, M. M. (2016) · Waste Management · doi:10.1016/j.wasman.2016.04.016 · Cited by 90
Satti, S. M., Shah, A. A., Auras, R. A., & Marsh, T. L. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.08.023 · Cited by 87
Sharma, S., Majumdar, A., & Butola, B. S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.04.108 · Cited by 86
Degradation of conventional and biobased plastics in soil under contrasting environmental conditions
Sanahuja, A. B., Benito-Kaesbach, A., Sánchez-García, N., & Sanz‐Lázaro, C. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.147678 · Cited by 89
Arriagada, P., Palza, H., Fluxá, P. P., Flores, M. I., & Caviedes, P. A. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36307 · Cited by 83
Development and Application of Green Composites: Using Coffee Ground and Bamboo Flour
Baek, B.-S., Park, J., Lee, B., & Kim, H. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0581-3 · Cited by 82
Preparation, characterization, and properties of TiO 2 /PLA nanocomposites by in situ polymerization
Zhuang, W., Liu, J., Zhang, J. H., Hu, B. X., & Shen, J. (2008) · Polymer Composites · doi:10.1002/pc.20658 · Cited by 79
Formulating bioplastic composites for biodegradability, recycling, and performance: A Review
Hubbe, M. A., Lavoine, N., Lucia, L. A., & Dou, C. (2020) · BioResources · doi:10.15376/biores.16.1.hubbe · Cited by 84
Lü, B., Jiang, C., Chen, Z., Li, A., Wang, W., Zhang, S., & Luo, G. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155108 · Cited by 70
Degradation issues of polymer materials used in railway field
Ito, M., & Nagai, K. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.07.011 · Cited by 80
Effect of ionising radiation on the mechanical and structural properties of 3D printed plastics
Wady, P., Wasilewski, A., Brock, L., Edge, R., Baidak, A., McBride, C., Leay, L., Griffiths, A., & Vallés, C. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100907 · Cited by 76
Pantaloni, D., Shah, D. U., Baley, C., & Bourmaud, A. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109166 · Cited by 71
Environmentally Compatible Food Packaging
(2008) · CRC Press eBooks · doi:10.1201/9781439832783 · Cited by 69
Moisture Sorption, Transport, and Hydrolytic Degradation in Polylactide
Cairncross, R. A., Becker, J. G., Ramaswamy, S., & O'connor, R. (2006) · Applied Biochemistry and Biotechnology · doi:10.1385/abab:131:1:774 · Cited by 61
Engler, L. G., Farias, N. C., Crespo, J. D. S., Gately, N., Major, I., Pezzoli, R., & Devine, D. M. (2023) · Polymers · doi:10.3390/polym15132874 · Cited by 61
Ahmed, J., Mulla, M. Z., & Arfat, Y. A. (2017) · Food Control · doi:10.1016/j.foodcont.2017.02.023 · Cited by 59
Atalay, S. E., Bezci, B., Özdemir, B., Göksu, Y. A., Ghanbari, A., Jalali, A., & Nofar, M. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02128-z · Cited by 60
Li, Q., Yan, J., Li, Y., Liu, Y., Andom, O., & Liu, Y. (2024) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2024.134768 · Cited by 59
Vibrational spectroscopy of polymeric biomaterials
Taddei, P., Tinti, A., & Fini, G. (2001) · Journal of Raman Spectroscopy · doi:10.1002/jrs.723 · Cited by 56
Degradable MXene-Doped Polylactic Acid Textiles for Wearable Biomonitoring
Huang, J., Xie, G., Wei, Q., Su, Y., Xu, X., & Jiang, Y. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c18395 · Cited by 55
State of Research and Trends in the Development of Polyvinyl Acetate-Based Wood Adhesive
Gadhave, R. V. I., & Dhawale, P. V. (2022) · Open Journal of Polymer Chemistry · doi:10.4236/ojpchem.2022.121002 · Cited by 54
Mystiridou, E., Patsidis, A. C., & Bouropoulos, N. (2021) · Applied Sciences · doi:10.3390/app11094253 · Cited by 56
Gritsch, L., Conoscenti, G., La Carrubba, V., Nooeaid, P., & Boccaccini, A. R. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.09.038 · Cited by 51
Gogoi, R., Singh, A., Moutam, V., Sharma, L., Sharma, K., Halder, A., & Siril, P. F. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106649 · Cited by 50
Liang, J., Gajula, P., Wang, S.-C., Wu, S., & Lu, S. (2019) · Applied Sciences · doi:10.3390/app9051014 · Cited by 49
Aliyev, E., Sakallıoğlu, U., Eren, Z., & Açıkgöz, G. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.004 · Cited by 49
Delamarche, E., Mattlet, A., Livi, S., Gérard, J., Bayard, R., & Massardier, V. (2020) · Frontiers in Materials · doi:10.3389/fmats.2020.00007 · Cited by 48
Nagarajan, M., Prodpran, T., Benjakul, S., & Songtipya, P. (2017) · Food Biophysics · doi:10.1007/s11483-017-9478-3 · Cited by 47
Biopolymeric Blends of Thermoplastic Starch and Polylactide as Sustainable Packaging Materials
Jozinović, A., Kovač, M., Bulatović, V. O., Grgić, D. K., Miloloža, M., Šubarić, D., & Ačkar, Đ. (2024) · Polymers · doi:10.3390/polym16091268 · Cited by 45
Arvidson, S. A., Wong, K. C., Gorga, R. E., & Khan, S. A. (2011) · Polymer · doi:10.1016/j.polymer.2011.12.042 · Cited by 45
Woo, S. I., & Wee, J.-W. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110726 · Cited by 45
An extensive investigation on gamma shielding properties of PLA/Gd2O3 nanocomposites
Niksarlıoğlu, S., Akman, F., Pekdemir, M. E., Yalçın, Ş., Kacal, M. R., & Yılmaz, M. (2023) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2023.110936 · Cited by 42
Reddy, L. H., & Bazile, D. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.08.012 · Cited by 44
Qin, S., Yu, C.-X., Chen, X., Zhou, H., & Zhao, L. (2018) · Chinese Journal of Polymer Science · doi:10.1007/s10118-018-2065-3 · Cited by 39
Dubinenko, G. E., Zinoviev, A., Больбасов, Е. Н., Kozelskaya, A. I., Shesterikov, E., Novikov, V., & Tverdokhlebov, S. I. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49662 · Cited by 41
Characteristics and Applications of PLA
Domenek, S., & Ducruet, V. (2016) · Wiley eBooks · doi:10.1002/9781119117360.ch6 · Cited by 40
Biodegradability and methane fermentability of polylactic acid by thermophilic methane fermentation
Tseng, H.-C., Fujimoto, N., & Ohnishi, A. (2019) · Bioresource Technology Reports · doi:10.1016/j.biteb.2019.100327 · Cited by 38
Rendenbach, C., Schöllchen, M., Bueschel, J., Gauer, T., Sedlacik, J., Kutzner, D., VALLITTU, P. K., Heiland, M., Smeets, R., Fiehler, J., et al. (2018) · Dentomaxillofacial Radiology · doi:10.1259/dmfr.20170361 · Cited by 38
Mauro, N., Drago, S. E., Cavallaro, G., & Giammona, G. (2019) · C – Journal of Carbon Research · doi:10.3390/c5040063 · Cited by 38
Galera Manzano, L. M., Ruz Cruz, M. Á., Moo Tun, N. M., Valadez González, A., & Mina Hernandez, J. H. (2021) · Polymers · doi:10.3390/polym13111855 · Cited by 36
Lü, R., Sameen, D. E., Qin, W., Wu, D., Dai, J., Li, S., & Liu, Y. (2020) · Coatings · doi:10.3390/coatings10030280 · Cited by 35
The Effect of Irradiation Sterilization on Poly(Lactic) Acid Films
Benyathiar, P., Selke, S. E. M., Harte, B., & Mishra, D. K. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01892-8 · Cited by 35
Guzman, A., Gnutek, N., & Janik, H. (2011) · Chemistry & Chemical Technology · doi:10.23939/chcht05.01.115 · Cited by 48
Wu, C.-S. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200700181 · Cited by 34
de Baynast, H., Tribot, A., Niez, B., Audonnet, F., Badel, É., César, G., Dussap, C., Gastaldi, E., Massacrier, L., Michaud, P., et al. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.114421 · Cited by 34
Considerations for the design of polymeric biodegradable products
Vieira, A. C., Guedes, R. M., & Tita, V. (2013) · Journal of Polymer Engineering · doi:10.1515/polyeng-2012-0150 · Cited by 33
Cicogna, F., Coiai, S., Monte, C. D., Spiniello, R., Fiori, S., Franceschi, M., Braca, F., Cinelli, P., Fehri, S. M. K., Lazzeri, A., et al. (2017) · Polymer International · doi:10.1002/pi.5356 · Cited by 34
Characteristics and Applications of Poly(lactide)
Domenek, S., Courgneau, C., & Ducruet, V. (2011) · Biopolymers · doi:10.1002/9781118164792.ch8 · Cited by 40
Investigating Material Characteristics and Morphology of Polymers Using Terahertz Technologies
Fischer, B. M., Wietzke, S., Reuter, M., Peters, O., Gente, R., Jansen, C., Vieweg, N., & Koch, M. (2013) · IEEE Transactions on Terahertz Science and Technology · doi:10.1109/tthz.2013.2255916 · Cited by 38
Khaliliazar, S., Akbari, S., & Kish, M. H. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.12.070 · Cited by 32
Arvidson, S. A., Roskov, K. E., Patel, J. J., Spontak, R. J., Khan, S. A., & Gorga, R. E. (2012) · Macromolecules · doi:10.1021/ma202246h · Cited by 32
Gil-Castell, O., Andres-Puche, R., Dominguez, E., Verdejo, E., Monreal, L., & Ribes-Greus, A. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109288 · Cited by 34
Tham, W. L., Poh, B. T., Ishak, Z. A. M., & Chow, W. S. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-014-0699-y · Cited by 31
Tham, W. L., Poh, B. T., Ishak, Z. A. M., & Chow, W. S. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42850 · Cited by 30
Enhanced Mineralization of PLA Meltblown Materials Due to Plasticization
Shi, B., & Palfery, D. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0190-3 · Cited by 30
Mosnáčková, K., Danko, M., Šišková, A. O., Falco, L., Janigová, I., Chmela, Š., Vanovčanová, Z., Omaníková, L., Chodák, I., & Mosnáček, J. (2017) · RSC Advances · doi:10.1039/c7ra08869h · Cited by 30
Suárez, L., Ortega, Z., Romero, F., Paz, R., & Marrero-Alemán, M. D. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02542-x · Cited by 29
Long term stability of biodegradable polymers on building limestone
Kaplan, Z., Böke, H., Sofuoǧlu, A., & İpekoğlu, B. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.03.004 · Cited by 30
Majidi, H. J., Babaei, A., Kazemi‐Pasarvi, S., Arab‐Bafrani, Z., & Amiri, M. (2020) · Polymers for Advanced Technologies · doi:10.1002/pat.5202 · Cited by 28
Khan, J. A., Momin, S. A., Mariatti, M., Vilay, V., & Todo, M. (2021) · Materials Research Express · doi:10.1088/2053-1591/ac35d0 · Cited by 28
Szlek, D. B., Reynolds, A. M., & Hubbe, M. A. (2022) · BioResources · doi:10.15376/biores.17.2.szlek · Cited by 35
Polymer–naproxen precipitation by supercritical antisolvent (SAS) process
Montes, A., Kin, N., Gordillo, M. D. G., Pereyra, C. M., & de la Ossa, E. J. M. (2014) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2014.02.004 · Cited by 28
Compostability of Poly(lactide): Degradation in an Inert Solid Medium
Longieras, A., Tanchette, J.-B., Erre, D., Braud, C., & Copinet, A. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-007-0061-8 · Cited by 27
Imam, S. H., Glenn, G. M., & Chiellini, E. (2012) · Elsevier eBooks · doi:10.1533/9780857095664.4.435 · Cited by 26
Metadata
- Authors
- Agarwal, M., Koelling, K. W., & Chalmers, J. J.
- Affiliations
- The Ohio State University (US)
- Corresponding author
- Koelling, K.W.
- Chalmers, J.J.
- ORCID
- Chalmers, J.J.
- Venue
- Biotechnology Progress
- Publisher
- Wiley
- Published
- 1998-06-05
- Volume
- 14
- Issue
- 3
- Pages
- 517-526
- ISSN
- 1520-6033 (ISSN-L)
- 8756-7938
- OpenAlex
- W2091281985
- Cited by
- 212
- References
- 0
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 13 · 2023: 13 · 2022: 15 · 2021: 20 · 2020: 17 · 2019: 11 · 2018: 7 · 2017: 16 · 2016: 6 · 2015: 10 · 2014: 9 · 2013: 11 · 2012: 10
- FWCI
- 1.40
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- doi.wiley.com/10.1002/tdm_license_1.1 (tdm, 6297 d)
- Locations
- Biotechnology Progress (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Cargill
- University of Pittsburgh
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Environmental Science › Pollution › Microbial bioremediation and biosurfactants
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- polylactic acid, biodegradation, microbial degradation, abiotic degradation, ester hydrolysis, degradation mechanism, temperature effects, water effect, polymer morphology, molecular weight reduction, CO2 evolution, biodegradable polymers
- MeSH terms
- Calorimetry, Differential Scanning, Chromatography, Gel, Hydrolysis, Polyesters, Polymers, Spectroscopy, Fourier Transform Infrared, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.