Modification of Poly(lactic acid) Films: Enhanced Wettability from Surface-Confined Photografting and Increased Degradation Rate Due to an Artifact of the Photografting Process
The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Abstract
The major objective of this research was to modify PLA film surfaces with the ultimate aim of making a bioactive surface that will show faster degradation. The PLA film was solvent-cast, and the film surfaces were grafted with poly(acrylic acid) (PAA) and poly(acrylamide) (PAAm) using a UV-induced photopolymerization process. The film surface resulting from each reaction step was analyzed using ATR−FTIR spectroscopy and contact angle measurements. Results showed that PAA was grafted from PLA film surfaces in 2 or 3 h, while PAAm was grafted in 3 or 5 h depending on the method of activation. Films grafted with PAA and PAAm exhibited improved wettability. The neat and surface-modified films were incubated in different pH solutions, viz., pH = 4, 7, and 10, for specified time periods. The films resulting from each treatment were analyzed using atomic force microscopy (AFM). The molecular weights of the incubated films were measured using chloroform-based GPC. Results established that faster degradation of the PLA film when incubated in different pH solutions was achieved for PLA- g -PAA films; however, control studies revealed that the major contribution to the observed degradation was due to the entangled PAA chains resulting from acrylic acid monomer that migrated into the film bulk and not due to the surface-grafted layers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Mechanisms of polymer degradation and erosion
Göpferich, A. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85755-3 · Cited by 1,781
Biodegradation of PLA/GA polymers: increasing complexity
Vert, M., Mauduit, J., & Li, S. (1994) · Biomaterials · doi:10.1016/0142-9612(94)90271-2 · Cited by 425
Polylactide Degradation by an Amycolatopsis sp
Pranamuda, H., Tokiwa, Y., & Tanaka, H. (1997) · Applied and Environmental Microbiology · doi:10.1128/aem.63.4.1637-1640.1997 · Cited by 287
Characterization of the degradation of polylactic acid polymer in a solid substrate environment
Agarwal, M., Koelling, K. W., & Chalmers, J. J. (1998) · Biotechnology Progress · doi:10.1021/bp980015p · Cited by 212
Kimura, Y., Shirotani, K., Yamane, H., & Kitao, T. (1988) · Macromolecules · doi:10.1021/ma00189a037 · Cited by 165
Poly(lactic acid) degradation in soil or under controlled conditions
Torres, A., Li, S., Roussos, S., & Vert, M. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19961226)62:13<2247::aid-app9>3.0.co;2-j · Cited by 123
Does UV irradiation affect polymer properties relevant to tissue engineering?
Fischbach, C., Teßmar, J., Lucke, A., Schnell, E., Schmeer, G., Blunk, T., & Göpferich, A. M. (2001) · Surface Science · doi:10.1016/s0039-6028(01)01297-3 · Cited by 116
Attenuated total reflectance spectroscopy of polymers : theory and practice
Urban, M. W. (1996) · American Chemical Society eBooks · Cited by 114
Biodegradation of porous versus non-porous poly(L-lactic acid) films
Lam, K. H., Nieuwenhuis, P., Molenaar, I., Esselbrugge, H., Feijén, J., Dijkstra, P. J., & Schakenraad, J. M. (1994) · Journal of Materials Science Materials in Medicine · doi:10.1007/bf00121086 · Cited by 94
Complexity of the hydrolytic degradation of aliphatic polyesters
Vert, M., Li, S., Garreau, H., Mauduit, J., Boustta, M., Schwach, G., Engel, R., & Coudane, J. (1997) · Die Angewandte Makromolekulare Chemie · doi:10.1002/apmc.1997.052470116 · Cited by 78
Research works printed but not linked: 16
- Ouchi T., 2002, J. Polym. Sci., Polym. Chem., 40, 1225
- Irvine D. J., 2001, Biomacromolecules, 2, 556
- Cai K., 2002, J. Biomed. Mater. Res., 60, 404
- Ma H., 2000, Macromolecules, 33, 335
- Yang W., 1999, Eur. Polym. J., 35, 1568
- Noh I., 1997, J. Polym. Sci., Polym. Chem., 35, 3482
- Steffens G. C. M., 2002, Biomaterials, 23, 3531
- Zhang X., 1994, J. Bioact. Compat. Polym., 9, 100
- Ho K. G., 1999, J. Environ. Polym. Degrad., 7, 100
- McDonald R. T., 1996, Macromolecules, 29, 7361
- Torres A., 1996, J. Appl. Polym. Sci., 62, 2302, 10.1002/(sici)1097-4628(19961226)62:13<2295::aid-app14>3.0.co;2-2 · DOI · Paper page
- Heller J., 1987, J. Controlled Release, 5, 177
- Siparsky G. L., 1997, J. Environ. Polym. Degrad., 5, 136
- Hsu W. P., 1993, Polymer, 34, 603
- Barndup J., 1988, Polymer Handbook
- Chen K. M., 2000, Langmuir, 16, 7834
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Self-citationHydrolytic degradation of polylactic acid (PLA) and its composites
Elsawy, M. A., Kim, K.-H., Park, J.-W., & Deep, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.143 · Cited by 988
Review: Photopolymerizable and Degradable Biomaterials for Tissue Engineering Applications
Ifkovits, J. L., & Burdick, J. A. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0093 · Cited by 619
“with PAA and poly(acrylamide) using photopolymerization in an attempt to generate a bioactive surface with rapid degradation.(99) Various copolymers containing blocks of poly(a-hydroxy esters) and other synthetic polymers have been prepared.”
Developments and new applications of UV-induced surface graft polymerizations
DENG, J., WANG, L., LIU, L., & YANG, W. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.06.002 · Cited by 465
Metadata
- Authors
- Janorkar, A. V., Metters, A. T., & Hirt, D. E.
- Affiliations
- Clemson University (US)
- Corresponding author
- Hirt, Douglas E.
- ORCID
- Janorkar, Amol V.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-10-26
- Volume
- 37
- Issue
- 24
- Pages
- 9151-9159
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1991396333
- Cited by
- 173
- References
- 22
- Citations by year
- 2026: 5 · 2025: 4 · 2024: 4 · 2023: 4 · 2022: 10 · 2021: 12 · 2020: 6 · 2019: 15 · 2018: 8 · 2017: 14 · 2016: 18 · 2015: 12 · 2014: 6 · 2013: 6 · 2012: 10
- FWCI
- 1.82
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- polylactic acid films, surface modification, photografting, poly(acrylic acid), polyacrylamide, wettability, biodegradation, surface-initiated polymerization, pH-dependent degradation, chain entanglement, bioactive surfaces
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Modification of Poly(lactic acid) Films: Enhanced Wettability from Surface-Confined Photografting and Increased Degradation Rate Due to an Artifact of the Photografting Process. https://app.cochat.ai/papers/10.1021/ma049056u
- The paper
- Janorkar, A. V., Metters, A. T., & Hirt, D. E. (2004). Modification of Poly(lactic acid) Films: Enhanced Wettability from Surface-Confined Photografting and Increased Degradation Rate Due to an Artifact of the Photografting Process. Macromolecules. https://doi.org/10.1021/ma049056u
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.