Characterization of the Porous Structure of SBA-15
The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.
Abstract
SBA-15 ordered mesoporous silicas were synthesized using the method reported by Zhao et al. The structures of these materials were characterized using powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), and nitrogen adsorption. The samples were found to exhibit structural properties similar to those reported earlier. Our study confirmed that the size of primary mesopores of SBA-15 can be tailored by the choice of synthesis temperature and that SBA-15 exhibits a significant amount of disordered micropores and small mesopores. The volume and size of these complementary pores were found to be dependent to some extent on the synthesis/aging temperature. It was shown that the washing of as-synthesized SBA-15 in water or ethanol was accompanied by an appreciable structural shrinkage and led to the removal of a significant part of the polymeric template. Therefore, washing needs to be avoided if one wants to isolate SBA-15 without appreciable loss of the template. It was confirmed that water-washed SBA-15 samples have fully accessible primary mesopores. Ethanol-washed samples also were found to exhibit accessible porosity. Despite an appreciable content of the template in the water- and ethanol-washed samples, their pore sizes were usually larger than those of the calcined materials. The observed structural properties of SBA-15 and their dependence on the synthesis temperature and washing were attributed to the changes in the degree of penetration of the poly(ethylene oxide) chains of the triblock copolymer template within the siliceous walls of SBA-15.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, with the aid of trimethylbenzene (TMB), the pore size of silica can be expanded to 30 nm [158].”
From Block Copolymers: Synthesis, Self-Assembly, and Applications (2017) · cites this paper as [158]
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
Zhao, D., Huo, Q., Feng, J., Chmelka, B. F., & Stucky, G. D. (1998) · Journal of the American Chemical Society · doi:10.1021/ja974025i · Cited by 6,697
Younan Xia, A., & Whitesides, G. M. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980316)37:5<667::aid-anie667>3.0.co;2-h · Cited by 4,672
Generalized syntheses of large-pore mesoporous metal oxides with semicrystalline frameworks
Yang, P., Zhao, D., Margolese, D. I., Chmelka, B. F., & Stucky, G. D. (1998) · Nature · doi:10.1038/24132 · Cited by 2,493
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<555::aid-adma555>3.0.co;2-e · Cited by 2,112
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<579::aid-adma579>3.0.co;2-r · Cited by 2,079
Alexandridis, P., & Alan Hatton, T. (1995) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/0927-7757(94)03028-x · Cited by 1,920
Surfactant Control of Phases in the Synthesis of Mesoporous Silica-Based Materials
Huo, Q., Margolese, D. I., & Stucky, G. D. (1996) · Chemistry of Materials · doi:10.1021/cm960137h · Cited by 1,567
Wanka, G., Hoffmann, H., & Ulbricht, W. (1994) · Macromolecules · doi:10.1021/ma00093a016 · Cited by 1,496
Research works printed but not linked: 3
- Bagshaw S. A., 1995, J. Science, 269, 1242
- Bae S. J., 1999, Chem. Commun., 31
- Ryoo R., J. Phys. Chem. B, submitted for publication.
Cited by
Ordered nanoporous arrays of carbon supporting high dispersions of platinum nanoparticles
Joo, S. H., Choi, S. J., Oh, I., Kwak, J., Liu, Z., Terasaki, O., & Ryoo, R. (2001) · Nature · doi:10.1038/35084046 · Cited by 2,496
“The (10) diffraction peak is lower than (11) in intensity, owing to the diffraction interference between the walls and the spacers interconnecting adjacent cylinders.”
BackgroundSelf-citationSynthesis of New, Nanoporous Carbon with Hexagonally Ordered Mesostructure
Jun, S., Joo, S. H., Ryoo, R., Kruk, M., Jaroniec, M., Liu, Z., Ohsuna, T., & Terasaki, O. (2000) · Journal of the American Chemical Society · doi:10.1021/ja002261e · Cited by 2,424
Self-citationOn the controllable soft-templating approach to mesoporous silicates
Wan, Y., & Zhao (2007) · Chemical Reviews · doi:10.1021/cr068020s · Cited by 2,371
Recent Progress in the Synthesis of Porous Carbon Materials
Lee, J., Kim, J., & Hyeon, T. (2006) · Advanced Materials · doi:10.1002/adma.200501576 · Cited by 2,127
Ordered Mesoporous Materials for Bioadsorption and Biocatalysis
Hartmann, M. (2005) · Chemistry of Materials · doi:10.1021/cm0485658 · Cited by 1,117
Metadata
- Authors
- Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R.
- Affiliations
- Kent State University (US)
- Corresponding author
- Jaroniec, Mietek
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-06-20
- Volume
- 12
- Issue
- 7
- Pages
- 1961-1968
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2046430541
- Semantic Scholar
- 429da901cc5e824f6a481b7cd2c33f5a56537ed3
- Cited by
- 1,409
- References
- 66
- Citations by year
- 2026: 22 · 2025: 40 · 2024: 39 · 2023: 48 · 2022: 58 · 2021: 53 · 2020: 62 · 2019: 67 · 2018: 77 · 2017: 60 · 2016: 57 · 2015: 63 · 2014: 58 · 2013: 67 · 2012: 63
- FWCI
- 29.94
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Chemistry of Materials (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
- Physical Sciences › Chemistry › Inorganic Chemistry › Zeolite Catalysis and Synthesis
- Physical Sciences › Earth and Planetary Sciences › Geochemistry and Petrology › Clay minerals and soil interactions
- Keywords
- SBA-15, ordered mesoporous silica, synthesis temperature, washing effects, structural shrinkage, triblock copolymer template, pore accessibility, calcination
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.