The DOI matches its Crossref record.
Polymers Reinforced by Covalently Bonded Inorganic Clusters
Abstract
Organically modified transition-metal oxide clusters (OMTOCs) are structurally well-defined nanosized building blocks for the preparation of a new type of inorganic−organic hybrid materials. There are two principal methods to synthesize OMTOCs with polymerizable organic groups attached to their surface: the groups can either be grafted to a preformed cluster (“surface modification” method) or introduced during the cluster synthesis (“in situ” method). The advantages and disadvantages of both methods are discussed. OMTOCs with polymerizable surface groups can be polymerized with or without an organic copolymer to yield polymers which are in most cases highly cross-linked by the inorganic constituents. The structural integrity and the properties of the clusters are retained upon incorporation into the polymers. Because there are hitherto only a few examples of cluster-reinforced polymers, restricted to tungsten, tin, titanium, and zirconium oxide clusters, the article reviews the early stages of an interesting new approach to inorganic−organic hybrid polymers and highlights possibilities for future materials syntheses.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lanthanide-Based Luminescent Hybrid Materials
Binnemans, K. (2009) · Chemical Reviews · doi:10.1021/cr8003983 · Cited by 3,349
Structural engineering of polyurethane coatings for high performance applications
Chattopadhyay, D. K., & Raju, K. V. S. N. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.05.003 · Cited by 1,836
A New Photoactive Crystalline Highly Porous Titanium(IV) Dicarboxylate
Dan-Hardi, M., Serre, C., Frot, T., Rozes, L., Maurin, G., Sanchez, C., & Férey, G. (2009) · Journal of the American Chemical Society · doi:10.1021/ja903726m · Cited by 1,440
Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale
Kickelbick, G. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00019-9 · Cited by 1,159
Mechanical properties of hybrid organic–inorganic materials
Mammeri, F., Bourhis, E. L., Rozes, L., & Sanchez, C. (2005) · Journal of Materials Chemistry · doi:10.1039/b507309j · Cited by 512
Titanium oxo-clusters: precursors for a Lego-like construction of nanostructured hybrid materials
Rozes, L., & Sanchez, C. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00137f · Cited by 395
Chemical modification of titanium alkoxides for sol–gel processing
Schubert, U. (2005) · Journal of Materials Chemistry · doi:10.1039/b504269k · Cited by 346
Self-citationPromises and Problems of Mesoscale Materials Chemistry or Why Meso?
Antonietti, M., & Ozin, G. A. (2004) · Chemistry – A European Journal · doi:10.1002/chem.200305009 · Cited by 339
Cluster-based inorganic–organic hybrid materials
Schubert, U. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00009d · Cited by 303
Self-citationGuillerm, V., Gross, S., Serre, C., Devic, T., Bauer, M., & Férey, G. (2010) · Chem. Commun. · doi:10.1039/b914919h · Cited by 279
Nonaqueous Chemistry of Group 4 Oxo Clusters and Colloidal Metal Oxide Nanocrystals
Van den Eynden, D., Pokratath, R., & De Roo, J. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c01008 · Cited by 83
Mixed-ligand zinc-oxoclusters: Efficient chemistry for high resolution nanolithography
Thakur, N., Bliem, R., Mochi, I., Vockenhuber, M., Ekinci, Y., & Castellanos, S. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc03597a · Cited by 52
Metadata
- Authors
- Schubert, U.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-06-30
- Volume
- 13
- Issue
- 10
- Pages
- 3487-3494
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2090729197
- Cited by
- 222
- References
- 0
- FWCI
- 14.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.