The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Hydrothermal Synthesis of α-MoO3Nanorods via Acidification of Ammonium Heptamolybdate Tetrahydrate
Abstract
One-dimensional nanostructures of orthorhombic molybdenum trioxide (α-MoO 3 ) have been synthesized in the forms of ribbons or rods via acidification under hydrothermal conditions at 140−200 °C. The reaction path has been revealed with our kinetic investigations, which shows the following sequence: (i) from the starting compound (NH 4 ) 6 Mo 7 O 24 ·4H 2 O to (ii) formation of intermediate compound ((NH 4 ) 2 O) 0.0866 ·MoO 3 ·0.231H 2 O, and then to (iii) final α-MoO 3 nanoribbons or nanorods in 100% phase purity. The optimal growth temperature is in the range of 170−180 °C under the current experimental settings. At higher reaction temperatures, this transformation can be accelerated, but with poorer crystal morphological homogeneity. It has been found that the dimensions of these rectangular nanorods are about 50 nm in thickness, 150−300 nm (mean value at 200 nm) in width, and a few tens of micrometers in length. The crystal morphology can be further altered with inorganic salts such as NaNO 3, KNO 3, Mg(NO 3 ) 2, and Al(NO 3 ) 3 . Using an H 2 S/H 2 stream, the above-prepared α-MoO 3 nanorods can be converted completely to 2H−MoS 2 nanorods at 600 °C. The original rodlike morphology is well-retained, although the aspect ratio of the oxide template is reduced upon the sulfidation treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Room-Temperature Ultraviolet Nanowire Nanolasers
Huang, M. H., Mao, S., Feick, H., Yan, H., Wu, Y., Kind, H., Weber, E., Russo, R., & Yang, P. (2001) · Science · doi:10.1126/science.1060367 · Cited by 8,923
Shape control of CdSe nanocrystals
Peng, X., Manna, L., Yang, W., Wickham, J., Scher, E., Kadavanich, A., & Alivisatos, A. P. (2000) · Nature · doi:10.1038/35003535 · Cited by 4,487
Catalytic Growth of Zinc Oxide Nanowires by Vapor Transport
Huang, M. H., Wu, Y., Feick, H., Tran, N., Weber, E., & Yang, P. (2001) · Advanced Materials · doi:10.1002/1521-4095(200101)13:2<113::aid-adma113>3.0.co;2-h · Cited by 2,701
Wet Chemical Synthesis of High Aspect Ratio Cylindrical Gold Nanorods
Jana, N. R., Gearheart, L., & Murphy, C. J. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp0107964 · Cited by 2,544
Polyhedral and cylindrical structures of tungsten disulphide
Tenne, R., Margulis, L., Genut, M., & Hodes, G. (1992) · Nature · doi:10.1038/360444a0 · Cited by 2,002
High-Rate, Gas-Phase Growth of MoS 2 Nested Inorganic Fullerenes and Nanotubes
Feldman, Y., Wasserman, E., Srolovitz, D. J., & Tenne, R. (1995) · Science · doi:10.1126/science.267.5195.222 · Cited by 1,214
Direct Observation of Vapor−Liquid−Solid Nanowire Growth
Wu, Y., & Yang, P. (2001) · Journal of the American Chemical Society · doi:10.1021/ja0059084 · Cited by 1,040
Thin films of fullerene-like MoS2 nanoparticles with ultra-low friction and wear
Chhowalla, M., & Amaratunga, G. A. J. (2000) · Nature · doi:10.1038/35025020 · Cited by 895
Carbon nanotubes as removable templates for metal oxide nanocomposites and nanostructures
Ajayan, P. M., Stephan, O., Redlich, P., & Colliex, C. (1995) · Nature · doi:10.1038/375564a0 · Cited by 676
Cited by
Nanostructured metal oxide-based materials as advanced anodes for lithium-ion batteries
Wu, H. B., Chen, J. S., Hng, H. H., & Wen (David) Lou, X. (2012) · Nanoscale · doi:10.1039/c2nr11966h · Cited by 1,082
Transition metal based battery-type electrodes in hybrid supercapacitors: A review
Liu, H., Liu, X., Wang, S., Liu, H.-K., & Li, L. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.03.003 · Cited by 710
Hydrothermal synthetic strategies of inorganic semiconducting nanostructures
Shi, W., Song, S., & Zhang, H. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60012b · Cited by 548
Cook, J. B., Kim, H., Yan, Y., Ko, J. S., Robbennolt, S., Dunn, B., & Tolbert, S. H. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501937 · Cited by 466
Synthetic architecture of interior space for inorganic nanostructures
Zeng, H. C. (2006) · J. Mater. Chem. · doi:10.1039/b511296f · Cited by 462
Self-citationTransition metal oxides – Thermoelectric properties
Walia, S., Balendhran, S., Nili, H., Zhuiykov, S., Rosengarten, G., Wang, Q. H., Bhaskaran, M., Sriram, S., Strano, M. S., & Kalantar-zadeh, K. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.06.003 · Cited by 381
Glucose‐Assisted Growth of MoS2 Nanosheets on CNT Backbone for Improved Lithium Storage Properties
Ding, S., Chen, J. S., & Lou, X. W. (. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201102480 · Cited by 353
Self-citationDirect Synthesis of Anatase TiO2 Nanowires with Enhanced Photocatalytic Activity
Wu, H. B., Hng, H. H., & Lou, X. W. (. (2012) · Advanced Materials · doi:10.1002/adma.201200564 · Cited by 287
Self-citationSynthesis of nanometre-thick MoO3sheets
Kalantar-zadeh, K., Tang, J., Wang, M., Wang, K. L., Shailos, A., Galatsis, K., Kojima, R., Strong, V., Lech, A., Wlodarski, W., et al. (2010) · Nanoscale · doi:10.1039/b9nr00320g · Cited by 286
Chithambararaj, A., Sanjini, N. S., Bose, A. C., & Velmathi, S. (2013) · Catalysis Science & Technology · doi:10.1039/c3cy20764a · Cited by 272
Wang, Z., Madhavi, S., & Lou, X. W. (. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp304216z · Cited by 260
Self-citationSun, Y., Hu, X., Yu, J. C., Li, Q., Luo, W., Yuan, L., Zhang, W., & Huang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01189h · Cited by 259
Metadata
- Authors
- Lou, X. W., & Zeng, H. C.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-09-21
- Volume
- 14
- Issue
- 11
- Pages
- 4781-4789
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1986137467
- Cited by
- 377
- References
- 27
- FWCI
- 7.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
