The DOI matches its Crossref record.
Atomic Layer Deposition of Al2O3 Films on Polyethylene Particles
Abstract
Sequential exposures of Al(CH 3 ) 3 and H 2 O at 77 °C were used to encapsulate low-density polyethylene (LDPE) particles with an ultrathin Al 2 O 3 film. FTIR studies revealed that the nucleation of Al 2 O 3 atomic layer deposition (ALD) on the LDPE particles occurred primarily via adsorption of Al(CH 3 ) 3 onto the LDPE surface or absorption of Al(CH 3 ) 3 into the LDPE particle followed by the reaction with H 2 O. The FTIR spectra then revealed the progressive switching between AlCH 3 * and AlOH* species with alternating exposure to Al(CH 3 ) 3 and H 2 O. This nucleation of Al 2 O 3 ALD did not require the existence of specific chemical functional groups on the polymer. The FTIR spectra also demonstrated that the sequential exposures of Al(CH 3 ) 3 and H 2 O led to an increase in Al 2 O 3 bulk vibrational modes. The increase of the absorbance for the Al 2 O 3 bulk vibrational modes was linear with the number of AB cycles. The presence of an Al 2 O 3 film on the LDPE particles was confirmed using transmission electron microscopy (TEM). The TEM images revealed that the Al 2 O 3 coating was very conformal to the LDPE particles. The Al 2 O 3 coating was also thicker than expected from typical Al 2 O 3 ALD growth rates. This thicker Al 2 O 3 coating was explained by the presence of hydrogen-bonded H 2 O on the Al 2 O 3 surface that increases the Al 2 O 3 growth rate during Al(CH 3 ) 3 exposures. On the basis of these results and additional investigations, a model is proposed for Al 2 O 3 ALD on polymers. Al 2 O 3 ALD should provide an effective gas diffusion barrier on temperature-sensitive polymeric materials such as LDPE.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Atomic Layer Deposition: An Overview
George, S. M. (2010) · Chemical Reviews · doi:10.1021/cr900056b · Cited by 5,814
Self-citationSurface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process
Puurunen, R. L. (2005) · Journal of Applied Physics · doi:10.1063/1.1940727 · Cited by 2,609
Crystallinity of inorganic films grown by atomic layer deposition: Overview and general trends
Miikkulainen, V., Leskelä, M., Ritala, M., & Puurunen, R. L. (2013) · Journal of Applied Physics · doi:10.1063/1.4757907 · Cited by 1,413
Synthesis and Surface Engineering of Complex Nanostructures by Atomic Layer Deposition
Knez, M., Nielsch, K., & Niinistö, L. (2007) · Advanced Materials · doi:10.1002/adma.200700079 · Cited by 889
Nucleation and Growth during Al2O3 Atomic Layer Deposition on Polymers
Wilson, C. A., Grubbs, R. K., & George, S. M. (2005) · Chemistry of Materials · doi:10.1021/cm050704d · Cited by 423
Self-citationGas diffusion barriers on polymers using Al2O3 atomic layer deposition
Groner, M. D., George, S. M., McLean, R. S., & Carcia, P. F. (2006) · Applied Physics Letters · doi:10.1063/1.2168489 · Cited by 399
Self-citationSurface Chemistry for Molecular Layer Deposition of Organic and Hybrid Organic−Inorganic Polymers
George, S. M., Yoon, B., & Dameron, A. A. (2009) · Accounts of Chemical Research · doi:10.1021/ar800105q · Cited by 377
Self-citationMolecular Layer Deposition of Alucone Polymer Films Using Trimethylaluminum and Ethylene Glycol
Dameron, A. A., Seghete, D., Burton, B. B., Davidson, S. D., Cavanagh, A. S., Bertrand, J. A., & George, S. M. (2008) · Chemistry of Materials · doi:10.1021/cm7032977 · Cited by 342
Self-citationLeng, C. Z., & Losego, M. D. (2017) · Materials Horizons · doi:10.1039/c7mh00196g · Cited by 224
Metadata
- Authors
- Ferguson, J. D., Weimer, A. W., & George, S. M.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-12-01
- Volume
- 16
- Issue
- 26
- Pages
- 5602-5609
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2496319339
- Cited by
- 195
- References
- 0
- FWCI
- 6.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.