The DOI matches its Crossref record.
Supercapacitors Prepared from Melamine-Based Carbon
Abstract
The electrochemical performance of supercapacitors made of a carbon material with a moderate amount of nitrogen atoms embedded in a carbon matrix is reported. Melamine was polymerized in the interlayer spaces of mica and afterward carbonized at various temperatures between 650 and 1000 °C. Elemental analysis and an XPS study showed that the nitrogen content of samples stabilized at 250 °C for 4 h prior to carbonization was generally higher if compared to their nonstabilized counterparts and that the nitrogen species were located preferably at the edges of graphene sheets. To understand the relationship between the capacitive performance and the porosity of stabilized and nonstabilized samples, the nitrogen adsorption/desorption method was also employed. Supercapacitors with the electrodes manufactured from these carbon materials showed a very good capacitive performance in 1 M sulfuric acid. The maximum gravimetric specific capacitance of 204.8 F g - 1 was obtained from a sample carbonized at 750 °C. Specific capacitances per surface area were also calculated, and, as a result, the stabilized samples provided higher values than the nonstabilized samples, for example, 3.66 F m - 2 for a sample stabilized and carbonized at 1000 °C. We associate the high values of capacitances in sulfuric acid with the pseudocapacitance that originates from an interaction between the nitrogen species and the protons of the electrolyte. This claim was verified by another measurement, where a neutral electrolyte (3 M NaCl) was used instead of sulfuric acid. We observed a decrease in capacitance with the surface area, and the values of capacitances per surface area were close to the values for activated carbons. Thus, the capacitance in NaCl can be attributed to the electrostatic interaction of ions on the double-layer rather than the pseudocapacitive interaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Advanced Materials for Energy Storage
Liu, C., Li, F., Ma, L., & Cheng, H. (2010) · Advanced Materials · doi:10.1002/adma.200903328 · Cited by 4,765
Carbons and Electrolytes for Advanced Supercapacitors
Béguin, F., Presser, V., Balducci, A., & Frackowiak, E. (2014) · Advanced Materials · doi:10.1002/adma.201304137 · Cited by 2,686
Energy storage in electrochemical capacitors: designing functional materials to improve performance
Hall, P. J., Mirzaeian, M., Fletcher, S. I., Sillars, F. B., Rennie, A. J. R., Shitta-Bey, G. O., Wilson, G., Cruden, A., & Carter, R. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00004c · Cited by 1,162
Wei, J., Zhou, D., Sun, Z., Deng, Y., Xia, Y., & Zhao, D. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202764 · Cited by 931
Nitrogen-containing microporous carbon nanospheres with improved capacitive properties
Su, F., Poh, C. K., Chen, J. S., Xu, G., Wang, D., Li, Q., Lin, J., & Lou, X. W. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00277a · Cited by 916
Nitrogen‐Containing Hydrothermal Carbons with Superior Performance in Supercapacitors
Zhao, L., Fan, L., Zhou, M., Guan, H., Qiao, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.201002647 · Cited by 893
Nitrogen-doped carbon materials
Inagaki, M., Toyoda, M., Soneda, Y., & Morishita, T. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.024 · Cited by 867
Self-citationNitrogen‐Enriched Nonporous Carbon Electrodes with Extraordinary Supercapacitance
Hulicova‐Jurcakova, D., Kodama, M., Shiraishi, S., Hatori, H., Zhu, Z. H., & Lu, G. Q. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801100 · Cited by 773
Self-citationTemplated nanocarbons for energy storage
Nishihara, H., & Kyotani, T. (2012) · Advanced Materials · doi:10.1002/adma.201201715 · Cited by 745
Nitrogen-containing porous carbons: synthesis and application
Shen, W., & Fan, W. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00028h · Cited by 698
Li, Z., Zhang, L., Amirkhiz, B. S., Tan, X., Xu, Z., Wang, H., Olsen, B. C., Holt, C. M. B., & Mitlin, D. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100548 · Cited by 649
Carbon nanotubes and their composites in electrochemical applications
Lota, G., Fic, K., & Frackowiak, E. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00470g · Cited by 600
Synthesis and Electrochemical Property of Boron-Doped Mesoporous Carbon in Supercapacitor
Wang, D.-W., Li, F., Chen, Z.-G., Lu, G. Q., & Cheng, H.-M. (2008) · Chemistry of Materials · doi:10.1021/cm801729y · Cited by 554
Hao, L., Ning, J., Luo, B., Wang, B., Zhang, Y., Tang, Z., Yang, J., Thomas, A., & Zhi, L. (2015) · Journal of the American Chemical Society · doi:10.1021/ja508693y · Cited by 438
Multivalent metal ion hybrid capacitors: a review with a focus on zinc-ion hybrid capacitors
Dong, L., Yang, W., Yang, W., Li, Y., Wu, W., & Wang, G. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta02678a · Cited by 438
Restacking-Inhibited 3D Reduced Graphene Oxide for High Performance Supercapacitor Electrodes
Lee, J. H., Park, N., Kim, B. G., Jung, D. S., Im, K., Hur, J., & Choi, J. W. (2013) · ACS Nano · doi:10.1021/nn4040734 · Cited by 425
Bimetallic Metal-Organic Frameworks for Controlled Catalytic Graphitization of Nanoporous Carbons
Tang, J., Salunkhe, R. R., Zhang, H., Malgras, V., Ahamad, T., Alshehri, S. M., Kobayashi, N., Tominaka, S., Ide, Y., Kim, J. H., et al. (2016) · Scientific Reports · doi:10.1038/srep30295 · Cited by 417
Nanda, S., Dalai, A. K., Berruti, F., & Kozinski, J. A. (2016) · Waste and Biomass Valorization · doi:10.1007/s12649-015-9459-z · Cited by 401
Flexible All‐Solid‐State Supercapacitors based on Liquid‐Exfoliated Black‐Phosphorus Nanoflakes
Hao, C., Yang, B., Wen, F., Xiang, J., Li, L., Wang, W., Zeng, Z., Xu, B., Zhao, Z., Liu, Z., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505730 · Cited by 339
Du, Q., Zheng, M., Zhang, L., Wang, Y., Chen, J., Xue, L., Dai, W., Ji, G., & Cao, J. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.01.089 · Cited by 301
Zhu, Z., & Xu, Z. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110308 · Cited by 253
Perini, L., Durante, C., Favaro, M., Perazzolo, V., Agnoli, S., Schneider, O., Granozzi, G., & Gennaro, A. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am506916y · Cited by 170
Adeniran, B., & Mokaya, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b05020 · Cited by 142
Metadata
- Authors
- Hulicova, D., Yamashita, J., Soneda, Y., Hatori, H., & Kodama, M.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-01-29
- Volume
- 17
- Issue
- 5
- Pages
- 1241-1247
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2089984714
- Cited by
- 505
- References
- 0
- FWCI
- 6.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.