Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 580

The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.

Electronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable Substrates

Lipomi, Darren J., Lee, Jennifer A., Vosgueritchian, Michael, Tee, Benjamin C.-K., Bolander, John A., Bao, Zhenan·2012·Chemistry of Materials

Abstract

Despite the ubiquity of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as a transparent conducting electrode in flexible organic electronic devices, its potential as a stretchable conductor has not been fully explored. This paper describes the electronic and morphological characteristics of PEDOT:PSS on stretchable poly(dimethylsiloxane) (PDMS) substrates. The evolution of resistance with strain depends dramatically on the methods used to coat the hydrophobic surface of PDMS with PEDOT:PSS, which is cast from an aqueous suspension. Treatment of the PDMS with an oxygen plasma produces a brittle skin that causes the PEDOT:PSS film to fracture and an increase in resistivity by four orders of magnitude at only 10% strain. In contrast, a mild treatment of the PDMS surface with ultraviolet/ozone (UV/O 3 ) and the addition of 1% Zonyl fluorosurfactant to the PEDOT:PSS solution produces a mechanically resilient film whose resistance increases by a factor of only two at 50% strain and retains significant conductivity up to 188% strain. Examination of the strained surfaces of these resilient PEDOT:PSS films suggests alignment of the grains in the direction of strain. Wave-like buckles that form after the first stretch >10% render the film reversibly stretchable. Significant cracking (∼2 cracks mm –1 ) occurs at 30% uniaxial strain, beyond which the films are not reversibly stretchable. Cyclic loading (up to 1000 stretches) produces an increase in resistivity whose net increase in resistance increases with the value of the peak strain. As an application, these stretchable, conductive films are used as electrodes in transparent, capacitive pressure sensors for mechanically compliant optoelectronic devices.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/cm203216m

Cites

47 of 47 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 580

Metadata

Authors
Lipomi, D. J., Lee, J. A., Vosgueritchian, M., Tee, B. C.-K., Bolander, J. A., & Bao, Z.
Venue
Chemistry of Materials
Published
2012-01-10
Volume
24
Issue
2
Pages
373-382
ISSN
  • 0897-4756 (ISSN-L)
  • 1520-5002
OpenAlex
W2324980468
Cited by
580
References
47
FWCI
16.09
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.