The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Synthesis and Characterization of Porous Benzimidazole-Linked Polymers and Their Performance in Small Gas Storage and Selective Uptake
Abstract
Porous organic polymers containing nitrogen-rich building units are among the most promising materials for selective CO 2 capture and separation which can have a tangible impact on the environment and clean energy applications. Herein we report on the synthesis and characterization of four new porous benzimidazole-linked polymers (BILPs) and evaluate their performance in small gas storage (H 2, CH 4, CO 2 ) and selective CO 2 binding over N 2 and CH 4 . BILPs were synthesized in good yields by the condensation reaction between aryl- o -diamine and aryl-aldehyde building blocks. The resulting BILPs exhibit moderate surface area (SA BET = 599–1306 m 2 g –1 ), high chemical and thermal stability, and remarkable gas uptake and selectivity. The highest selectivity based on initial slope calculations at 273 K was observed for BILP-2: CO 2 /N 2 (113) and CO 2 /CH 4 (17), while the highest storage capacity was recorded for BILP-4: CO 2 (24 wt % at 273 K and 1 bar) and H 2 (2.3 wt % at 77 K and 1 bar). These selectivities and gas uptakes are among the highest by porous organic polymers known to date which in addition to the remarkable chemical and physical stability of BILPs make this class of material very promising for future use in gas storage and separation applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal–Organic Framework Materials as Chemical Sensors
Kreno, L. E., Leong, K., Farha, O. K., Allendorf, M., Van Duyne, R. P., & Hupp, J. T. (2012) · Chemical Reviews · doi:10.1021/cr200324t · Cited by 7,136
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Hydrogen storage in metal–organic frameworks
Murray, L. J., Dincă, M., & Long, J. R. (2009) · Chemical Society Reviews · doi:10.1039/b802256a · Cited by 4,532
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Hydrogen Storage in Metal–Organic Frameworks
Suh, M. P., Park, H. J., Prasad, T. K., & Lim, D.-W. (2012) · Chemical Reviews · doi:10.1021/cr200274s · Cited by 3,689
Synthesis, Structure, and Carbon Dioxide Capture Properties of Zeolitic Imidazolate Frameworks
Phan, A., Doonan, C. J., Uribe-Romo, F. J., Knobler, C. B., O’Keeffe, M., & Yaghi, O. M. (2010) · Accounts of Chemical Research · doi:10.1021/ar900116g · Cited by 2,618
Furukawa, H., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9015765 · Cited by 2,608
Designed Synthesis of 3D Covalent Organic Frameworks
El-Kaderi, H. M., Hunt, J. R., Mendoza-Cortés, J. L., Côté, A. P., Taylor, R. E., O'Keeffe, M., & Yaghi, O. M. (2007) · Science · doi:10.1126/science.1139915 · Cited by 2,575
Self-citation
Cited by
Covalent Organic Frameworks for CO2 Capture
Zeng, Y., Zou, R., & Zhao, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505004 · Cited by 1,140
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
Covalent Triazine Frameworks via a Low‐Temperature Polycondensation Approach
Wang, K., Yang, L., Wang, X., Guo, L., Cheng, G., Zhang, C., Jin, S., Tan, B., & Cooper, A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201708548 · Cited by 639
Polyamine‐Tethered Porous Polymer Networks for Carbon Dioxide Capture from Flue Gas
Lu, W., Sculley, J. P., Yuan, D., Krishna, R., Wei, Z., & Zhou, H. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201202176 · Cited by 581
Porous Polymers as Multifunctional Material Platforms toward Task‐Specific Applications
Wu, J., Xu, F., Li, S., Ma, P., Zhang, X., Liu, Q., Fu, R., & Wu, D. (2019) · Advanced Materials · doi:10.1002/adma.201802922 · Cited by 555
Zhao, Y., Yao, K. X., Teng, B., Zhang, T., & Han, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42548g · Cited by 525
Luo, Y., Li, B., Wang, W., Wu, K., & Tan, B. (2012) · Advanced Materials · doi:10.1002/adma.201202447 · Cited by 487
Trends and challenges for microporous polymers
Chaoui, N., Trunk, M., Dawson, R., Schmidt, J., & Thomas, A. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00071e · Cited by 479
Li, B., Zhang, Y., Krishna, R., Yao, K., Han, Y., Wu, Z., Ma, D., Shi, Z., Pham, T., Space, B., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502119z · Cited by 455
Activated Carbon Spheres for CO2 Adsorption
Wickramaratne, N. P., & Jaroniec, M. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400112m · Cited by 445
Porous Organic Polymers for Post‐Combustion Carbon Capture
Zou, L., Sun, Y., Che, S., Yang, X., Wang, X., Bosch, M., Wang, Q., Li, H., Smith, M., Yuan, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700229 · Cited by 432
Hedin, N., Andersson, L., Bergström, L., & Yan, J. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.11.034 · Cited by 424
Porous organic polymers for CO2capture, separation and conversion
Song, K. S., Fritz, P. W., & Coskun, A. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00727d · Cited by 409
Zhu, Y., Long, H., & Zhang, W. (2013) · Chemistry of Materials · doi:10.1021/cm400019f · Cited by 366
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
Carbon dioxide capture in amorphous porous organic polymers
Wang, W., Zhou, M., & Yuan, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09234a · Cited by 307
Arab, P., Rabbani, M. G., Sekizkardes, A. K., İslamoğlu, T., & El-Kaderi, H. M. (2014) · Chemistry of Materials · doi:10.1021/cm403161e · Cited by 300
Self-citationChemical functionalization strategies for carbon dioxide capture in microporous organic polymers
Dawson, R., Cooper, A. I., & Adams, D. J. (2013) · Polymer International · doi:10.1002/pi.4407 · Cited by 284
Microporous Functionalized Triazine-Based Polyimides with High CO2 Capture Capacity
Liebl, M. R., & Senker, J. (2013) · Chemistry of Materials · doi:10.1021/cm4000894 · Cited by 269
Hug, S., Stegbauer, L., Oh, H., Hirscher, M., & Lotsch, B. V. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03330 · Cited by 267
Carbon capture by absorption – Path covered and ahead
Sreedhar, I., Nahar, T., Venugopal, A., & Srinivas, B. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.109 · Cited by 261
Design and synthesis of covalent organic frameworks towards energy and environment fields
Cao, S., Li, B., Zhu, R., & Pang, H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.184 · Cited by 256
Development trends in porous adsorbents for carbon capture
Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03149 · Cited by 127
Shen, F., Wang, Y., Li, L., Zhang, K., Smith, R. L., & Qi, X. (2018) · Chemical Engineering Communications · doi:10.1080/00986445.2017.1367671 · Cited by 65
Metadata
- Authors
- Rabbani, M. G., & El-Kaderi, H. M.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-04-04
- Volume
- 24
- Issue
- 8
- Pages
- 1511-1517
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2313549007
- Cited by
- 461
- References
- 59
- FWCI
- 23.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.