The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Critical Role of Oxygen Evolved from Layered Li–Excess Metal Oxides in Lithium Rechargeable Batteries
Abstract
The high capacity of the layered Li–excess oxide cathode is always accompanied by extraction of a significant amount of oxygen from the structure. The effects of oxygen on the electrochemical cycling are not well understood. Here, the detailed reaction scheme following oxygen evolution was established using real-time gas analysis and ex situ chemical analysis of the surface of the electrodes. A series of electrochemical/chemical reactions involving oxygen radicals constantly produced and decomposed lithium carbonate during cell operation. Moreover, byproducts, including water, affected the cycle life and rate capability: hydrolysis of the electrolyte salt formed hydrofluoric acid that attacked the surface of the electrode. This finding implies that protection of the electrode surface from damage, for example, by a coating or removal of oxygen radicals by scavengers, will be critical to widespread usage of Li–excess transition metal oxides in rechargeable lithium batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Battery materials for ultrafast charging and discharging
Kang, B., & Ceder, G. (2009) · Nature · doi:10.1038/nature07853 · Cited by 3,480
Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,638
Self-citationArmstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
Reactions in the Rechargeable Lithium–O2 Battery with Alkyl Carbonate Electrolytes
Freunberger, S. A., Chen, Y., Peng, Z., Griffin, J. M., Hardwick, L. J., Bardé, F., Novák, P., & Bruce, P. G. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2021747 · Cited by 1,270
Yabuuchi, N., Yoshii, K., Myung, S.-T., Nakai, I., & Komaba, S. (2011) · Journal of the American Chemical Society · doi:10.1021/ja108588y · Cited by 1,188
Lu, Z., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1480014 · Cited by 1,016
Cited by
Aqueous Rechargeable Li and Na Ion Batteries
Kim, H., Hong, J., Park, K.-Y., Kim, H., Kim, S.-W., & Kang, K. (2014) · Chemical Reviews · doi:10.1021/cr500232y · Cited by 1,493
Self-citationHigh-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Luo, K., Roberts, M. R., Hao, R., Guerrini, N., Pickup, D. M., Liu, Y.-S., Edström, K., Guo, J., Chadwick, A. V., Duda, L. C., et al. (2016) · Nature Chemistry · doi:10.1038/nchem.2471 · Cited by 1,241
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Self-citationElectrode–Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Gauthier, M., Carney, T. J., Grimaud, A., Giordano, L., Pour, N., Chang, H.-H., Fenning, D. P., Lux, S. F., Paschos, O., Bauer, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01727 · Cited by 1,028
Electrode–electrolyte interfaces in lithium-based batteries
Yu, X., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02555f · Cited by 649
Oxygen redox chemistry without excess alkali-metal ions in Na2/3[Mg0.28Mn0.72]O2
Maitra, U., House, R. A., Somerville, J. W., Tapia-Ruiz, N., Lozano, J. G., Guerrini, N., Hao, R., Luo, K., Jin, L., Pérez-Osorio, M. A., et al. (2018) · Nature Chemistry · doi:10.1038/nchem.2923 · Cited by 644
He, W., Guo, W., Wu, H., Lin, L., Liu, Q., Han, X., Xie, Q., Liu, P., Zheng, H., Wang, L., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005937 · Cited by 626
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Zhang, J.-N., Li, Q., Wang, Y., Zheng, J., Yu, X., & Li, H. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.016 · Cited by 473
Yabuuchi, N., Nakayama, M., Takeuchi, M., Komaba, S., Hashimoto, Y., Mukai, T., Shiiba, H., Sato, K., Kobayashi, Y., Nakao, A., et al. (2016) · Nature Communications · doi:10.1038/ncomms13814 · Cited by 459
Valuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials
Nisar, U., Muralidharan, N., Essehli, R., Amin, R., & Belharouak, I. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.03.015 · Cited by 428
Sathiya, M., Ramesha, K., Rousse, G., Foix, D., Gonbeau, D., Prakash, A. S., Doublet, M. L., Hemalatha, K., & Tarascon, J.-M. (2013) · Chemistry of Materials · doi:10.1021/cm400193m · Cited by 405
Requirements for reversible extra-capacity in Li-rich layered oxides for Li-ion batteries
Xie, Y., Saubanère, M., & Doublet, M.-L. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02328b · Cited by 376
Scavenging Materials to Stabilize LiPF6‐Containing Carbonate‐Based Electrolytes for Li‐Ion Batteries
Han, J., Kim, K., Lee, Y., & Choi, N. (2019) · Advanced Materials · doi:10.1002/adma.201804822 · Cited by 354
Hy, S., Liu, H., Zhang, M., Qian, D., Hwang, B.-J., & Meng, Y. S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03573b · Cited by 347
Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00327 · Cited by 338
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
Choi, N.-S., Han, J.-G., Ha, S.-Y., Park, I., & Back, C.-K. (2015) · RSC Advances · doi:10.1039/c4ra11575a · Cited by 297
Lee, J., Seo, D.-H., Balasubramanian, M., Twu, N., Li, X., & Ceder, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02329g · Cited by 269
Nanoscale Phenomena in Lithium-Ion Batteries
Jung, S.-K., Hwang, I., Chang, D., Park, K.-Y., Kim, S. J., Seong, W. M., Eum, D., Park, J., Kim, B., Kim, J., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00405 · Cited by 253
Self-citation
Metadata
- Authors
- Hong, J., Lim, H.-D., Lee, M., Kim, S.-W., Kim, H., Oh, S.-T., Chung, G.-C., & Kang, K.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-07-02
- Volume
- 24
- Issue
- 14
- Pages
- 2692-2697
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2313584171
- Cited by
- 304
- References
- 25
- FWCI
- 12.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.