The DOI matches its Crossref record; 78 of the 78 references it cites were found in a registry or an index.
Water Sorption Cycle Measurements on Functionalized MIL-101Cr for Heat Transformation Application
Abstract
The water loading capacity and water cycle stability (40 adsorption/desorption cycles) of four nitro- or amino-functionalized MIL-101Cr materials ( 1 – 4 ) is assessed for heat transformation applications. Amino- or nitro-functionalized ( 1, 3 ) and partially amino- or nitro-functionalized MIL-101Cr ( 2, 4 ) have been synthesized through time-controlled postsynthetic modification of MIL-101Cr. The partially functionalized materials ( 2, 4 ) contain about 78 mol % amino- or nitro-functionalized terephthalate linker. Hydrophilic nitro or amino functionalities were introduced into MIL-101Cr in order to achieve water loading at lower p / p 0 values for possible use in thermally driven adsorption chillers or heat pumps. Among the four materials studied, fully aminated MIL-101Cr-NH 2, 1, and partially aminated MIL-101Cr-pNH 2, 2, showed the best water loadings (about 1.0 gH 2 O/gMIL) as well as water stability over 40 adsorption–desorption cycles. After 40 cycles, the X-ray powder diffractogram and Brunauer–Emmett–Teller (BET) surface determination of amino-functionalized materials indicated structural integrity with Δ BET = −6.3% after 40 cycles, while the nitro-functionalized MIL-101Cr exhibited a decrease in their BET surface of Δ BET = −25% and −20% for 3 and 4, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reaction Kinetics in Differential Thermal Analysis
Kissinger, H. E. (1957) · Analytical Chemistry · doi:10.1021/ac60131a045 · Cited by 13,196
Selective gas adsorption and separation in metal–organic frameworks
Li, J.-R., Kuppler, R. J., & Zhou, H.-C. (2009) · Chemical Society Reviews · doi:10.1039/b802426j · Cited by 8,932
Metal-organic framework materials as catalysts
Lee, J., Farha, O. K., Roberts, J., Scheidt, K. A., Nguyen, S. T., & Hupp, J. T. (2009) · Chemical Society Reviews · doi:10.1039/b807080f · Cited by 7,969
Introduction to Metal–Organic Frameworks
Zhou, H.-C., Long, J. R., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr300014x · Cited by 7,720
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
Luminescent Functional Metal–Organic Frameworks
Cui, Y., Yue, Y., Qian, G., & Chen, B. (2012) · Chemical Reviews · doi:10.1021/cr200101d · Cited by 5,697
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Stock, N., & Biswas, S. (2012) · Chemical Reviews · doi:10.1021/cr200304e · Cited by 5,045
Luminescent metal–organic frameworks
Allendorf, M. D., Bauer, C. A., Bhakta, R. K., & Houk, R. J. T. (2009) · Chemical Society Reviews · doi:10.1039/b802352m · Cited by 4,960
Cited by
Stable Metal–Organic Frameworks: Design, Synthesis, and Applications
Yuan, S., Feng, L., Wang, K., Pang, J., Bosch, M., Lollar, C., Sun, Y., Qin, J., Yang, X., Zhang, P., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704303 · Cited by 2,981
Water Adsorption in Porous Metal–Organic Frameworks and Related Materials
Furukawa, H., Gándara, F., Zhang, Y.-B., Jiang, J., Queen, W. L., Hudson, M. R., & Yaghi, O. M. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500330a · Cited by 2,888
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
Water adsorption in MOFs: fundamentals and applications
Canivet, J., Fateeva, A., Guo, Y., Coasne, B., & Farrusseng, D. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00078a · Cited by 1,444
Dechnik, J., Gascon, J., Doonan, C. J., Janiak, C., & Sumby, C. J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201701109 · Cited by 796
Self-citationMetal–Organic Frameworks for Water Harvesting from Air
Kalmutzki, M. J., Diercks, C. S., & Yaghi, O. M. (2018) · Advanced Materials · doi:10.1002/adma.201704304 · Cited by 772
Water and Metal–Organic Frameworks: From Interaction toward Utilization
Liu, X., Wang, X., & Kapteijn, F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00746 · Cited by 614
Adsorption-Driven Heat Pumps: The Potential of Metal–Organic Frameworks
de Lange, M. F., Verouden, K. J. F. M., Vlugt, T. J. H., Gascon, J., & Kapteijn, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00059 · Cited by 510
Pore Chemistry of Metal–Organic Frameworks
Ji, Z., Wang, H., Canossa, S., Wuttke, S., & Yaghi, O. M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000238 · Cited by 459
Kinetic stability of metal–organic frameworks for corrosive and coordinating gas capture
Rieth, A. J., Wright, A. M., & Dincă, M. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0140-1 · Cited by 402
Hydrolytically stable fluorinated metal-organic frameworks for energy-efficient dehydration
Cadiau, A., Belmabkhout, Y., Adil, K., Bhatt, P. M., Pillai, R. S., Shkurenko, A., Martineau-Corcos, C., Maurin, G., & Eddaoudi, M. (2017) · Science · doi:10.1126/science.aam8310 · Cited by 393
A Thermal Management Strategy for Electronic Devices Based on Moisture Sorption-Desorption Processes
Wang, C., Hua, L., Yan, H., Li, B., Tu, Y., & Wang, R. (2020) · Joule · doi:10.1016/j.joule.2019.12.005 · Cited by 349
Bhattacharjee, S., Chen, C., & Ahn, W.-S. (2014) · RSC Adv. · doi:10.1039/c4ra11259h · Cited by 301
Jeremias, F., Fröhlich, D., Janiak, C., & Henninger, S. K. (2014) · RSC Adv. · doi:10.1039/c4ra03794d · Cited by 292
Self-citationRecent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Mahajan, S., & Lahtinen, M. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2022.108930 · Cited by 282
Jeremias, F., Lozan, V., Henninger, S. K., & Janiak, C. (2013) · Dalton Transactions · doi:10.1039/c3dt51471d · Cited by 279
Self-citationStegbauer, L., Hahn, M. W., Jentys, A., Savasci, G., Ochsenfeld, C., Lercher, J. A., & Lotsch, B. V. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02151 · Cited by 254
Metadata
- Authors
- Khutia, A., Rammelberg, H. U., Schmidt, T., Henninger, S., & Janiak, C.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-02-26
- Volume
- 25
- Issue
- 5
- Pages
- 790-798
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2331550880
- Cited by
- 275
- References
- 78
- FWCI
- 34.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.