The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
High Performance Li2Ru1–yMnyO3 (0.2 ≤ y ≤ 0.8) Cathode Materials for Rechargeable Lithium-Ion Batteries: Their Understanding
Abstract
Understanding the origin of the high capacity displayed by Li 2 MnO 3 –LiMO 2 (M = Ni, Co) composites is essential for improving their cycling and rate capability performances. To address this issue, the Li 2 Ru 1– y Mn y O 3 series between the iso-structural layered end-members Li 2 MnO 3 and Li 2 RuO 3 was investigated. A complete solid solution was found, with the 0.4 ≤ y ≤ 0.6 members showing sustainable reversible capacities exceeding 220 mAh·g –1 centered around 3.6 V vs Li + /Li. The voltage–composition profiles display a plateau on the first charge as compared to an S-type curve on subsequent discharge which is maintained on the following charges/discharges, with therefore a lowering of the average voltage. We show this profile to evolve upon long cycling due to a structural phase transition as deduced from XRD measurements. Finally we demonstrate, via XPS measurements, the oxidation and reduction of ruthenium (Ru 5+ /Ru 4+ ) during cycling together with a partial activity of the Mn 4+ /Mn 3+ redox couple. Moreover, we provide direct evidence for the reversibility of the O 2– → O – anionic process upon cycling, hence accounting for the high capacity displayed by these materials. This work, by capturing the main redox processes pertaining to these materials, should facilitate their development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Self-citationA profile refinement method for nuclear and magnetic structures
Rietveld, H. M. (1969) · Journal of Applied Crystallography · doi:10.1107/s0021889869006558 · Cited by 17,524
Recent advances in magnetic structure determination by neutron powder diffraction
Rodríguez-Carvajal, J. (1993) · Physica B: Condensed Matter · doi:10.1016/0921-4526(93)90108-i · Cited by 15,608
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Self-citationPhospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,638
Systematic XPS studies of metal oxides, hydroxides and peroxides
Dupin, J.-C., Gonbeau, D., Vinatier, P., & Levasseur, A. (2000) · Physical Chemistry Chemical Physics · doi:10.1039/a908800h · Cited by 2,247
Self-citationLithium insertion into manganese spinels
Thackeray, M. M., David, W. I. F., Bruce, P. G., & Goodenough, J. B. (1983) · Materials Research Bulletin · doi:10.1016/0025-5408(83)90138-1 · Cited by 1,778
Cited by
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
Rational design of layered oxide materials for sodium-ion batteries
Zhao, C., Wang, Q., Yao, Z., Wang, J., Sánchez-Lengeling, B., Ding, F., Qi, X., Lu, Y., Bai, X., Li, B., et al. (2020) · Science · doi:10.1126/science.aay9972 · Cited by 1,540
Reversible anionic redox chemistry in high-capacity layered-oxide electrodes
Sathiya, M., Rousse, G., Ramesha, K., Laisa, C. P., Vezin, H., Sougrati, M. T., Doublet, M.-L., Foix, D., Gonbeau, D., Walker, W., et al. (2013) · Nature Materials · doi:10.1038/nmat3699 · Cited by 1,539
Self-citationLuo, K., Roberts, M. R., Hao, R., Guerrini, N., Pickup, D. M., Liu, Y.-S., Edström, K., Guo, J., Chadwick, A. V., Duda, L. C., et al. (2016) · Nature Chemistry · doi:10.1038/nchem.2471 · Cited by 1,241
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Understanding electrochemical potentials of cathode materials in rechargeable batteries
Liu, C., Neale, Z. G., & Cao, G. (2016) · Materials Today · doi:10.1016/j.mattod.2015.10.009 · Cited by 1,156
Moysiadou, A., Lee, S., Hsu, C.-S., Chen, H. M., & Hu, X. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c04867 · Cited by 987
Visualization of O-O peroxo-like dimers in high-capacity layered oxides for Li-ion batteries
McCalla, E., Abakumov, A. M., Saubanère, M., Foix, D., Berg, E. J., Rousse, G., Doublet, M.-L., Gonbeau, D., Novák, P., Van Tendeloo, G., et al. (2015) · Science · doi:10.1126/science.aac8260 · Cited by 854
Self-citationQiu, B., Zhang, M., Wu, L., Wang, J., Xia, Y., Qian, D., Liu, H., Hy, S., Chen, Y., An, K., et al. (2016) · Nature Communications · doi:10.1038/ncomms12108 · Cited by 734
Review—Li-Rich Layered Oxide Cathodes for Next-Generation Li-Ion Batteries: Chances and Challenges
Rozier, P., & Tarascon, J. M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0111514jes · Cited by 695
Self-citationAdvances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
Yabuuchi, N., Takeuchi, M., Nakayama, M., Shiiba, H., Ogawa, M., Nakayama, K., Ohta, T., Endo, D., Ozaki, T., Inamasu, T., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1504901112 · Cited by 498
Kuznetsov, D. A., Han, B., Yu, Y., Rao, R. R., Hwang, J., Román-Leshkov, Y., & Shao-Horn, Y. (2018) · Joule · doi:10.1016/j.joule.2017.11.014 · Cited by 452
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
Intermediate honeycomb ordering to trigger oxygen redox chemistry in layered battery electrode
Mortemard de Boisse, B., Liu, G., Ma, J., Nishimura, S.-I., Chung, S.-C., Kiuchi, H., Harada, Y., Kikkawa, J., Kobayashi, Y., Okubo, M., et al. (2016) · Nature Communications · doi:10.1038/ncomms11397 · Cited by 334
Electron paramagnetic resonance imaging for real-time monitoring of Li-ion batteries
Sathiya, M., Leriche, J.-B., Salager, E., Gourier, D., Tarascon, J.-M., & Vezin, H. (2015) · Nature Communications · doi:10.1038/ncomms7276 · Cited by 312
Self-citationNong, S., Dong, W., Yin, J., Dong, B., Lu, Y., Yuan, X., Wang, X., Bu, K., Chen, M., Jiang, S., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b13736 · Cited by 312
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
Lee, J., Seo, D.-H., Balasubramanian, M., Twu, N., Li, X., & Ceder, G. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02329g · Cited by 269
Guéguen, A., Streich, D., He, M., Mendez, M., Chesneau, F. F., Novák, P., & Berg, E. J. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0981606jes · Cited by 265
Metadata
- Authors
- Sathiya, M., Ramesha, K., Rousse, G., Foix, D., Gonbeau, D., Prakash, A. S., Doublet, M. L., Hemalatha, K., & Tarascon, J.-M.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-03-22
- Volume
- 25
- Issue
- 7
- Pages
- 1121-1131
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1968641774
- Cited by
- 405
- References
- 35
- FWCI
- 25.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.