Cross-Linking 3D Assemblies of Nanoparticles into Mechanically Strong Aerogels by Surface-Initiated Free-Radical Polymerization
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Skeletal nanoparticles of porous low-density materials formally classified as aerogels are cross-linked by surface-initiated polymerization (SIP) using a new surface-confined bidentate free-radical initiator structurally related to azobisisobutyronitrile (AIBN). Methylmethacrylate, styrene, and divinylbenzene are introduced in the mesopores, and upon heating at 70 °C, all mesoporous surfaces throughout the entire skeletal framework are coated conformally with a 10−12 nm thick polymer layer indistinguishable spectroscopically from the respective commercial bulk materials. The amount of polymer incorporated in the structure is controlled by the concentration of the monomer in the mesopores, and albeit an up to a 3-fold increase in bulk density (up to 0.6−0.8 g cm −3 ) and a decrease in the porosity even down to 40%, the materials remain mesoporous with average pore diameters increasing from 20 nm in the native samples to 41 and 62 nm in PMMA and polystyrene cross-linked samples, respectively. The new materials combine hydrophobicity with vastly improved mechanical properties in terms of strength, modulus, and toughness relative to their native (non-cross-linked) counterparts. The effect of polymer accumulation on the modulus has been also simulated numerically. Being able to use SIP for cross-linking 3D assemblies of nanoparticles comprising the skeletal framework of typical aerogels paves the way for the deconvolution of cross-linking from gelation (a free-radical versus an ionic process, respectively), so that ultimately all gelation and cross-linking reagents can be included together in one pot, leading to great process simplification. The mechanical properties of the new materials render them appropriate for anti-ballistic applications (e.g., armor).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Polymer brushes: surface-immobilized macromolecules
Zhao, B., & Brittain, W. J. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00012-5 · Cited by 1,628
Leventis, N., Elder, I. A., Rolison, D. R., Anderson, M. L., & Merzbacher, C. I. (1999) · Chemistry of Materials · doi:10.1021/cm9901966 · Cited by 163
Self-citation
Cited by
An Overview on Silica Aerogels Synthesis and Different Mechanical Reinforcing Strategies
Maleki, H., Durães, L., & Portugal, A. (2014) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2013.10.017 · Cited by 740
“[161] applied the “surface initiated grafting from” approach for integration of polymethylmethacrylate (PMMA), polydivinylbenzene (PDVB) and polystyrene (PS) in the silica network, with polymerization starting from the surface of the silica aerogel.”
BackgroundMethodInfluentialTailoring Mechanical Properties of Aerogels for Aerospace Applications
Randall, J. P., Meador, M. A. B., & Jana, S. C. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200007n · Cited by 579
Porous Polymers as Multifunctional Material Platforms toward Task‐Specific Applications
Wu, J., Xu, F., Li, S., Ma, P., Zhang, X., Liu, Q., Fu, R., & Wu, D. (2019) · Advanced Materials · doi:10.1002/adma.201802922 · Cited by 555
Synthesis and biomedical applications of aerogels: Possibilities and challenges
Maleki, H., Durães, L., García-González, C. A., del Gaudio, P., Portugal, A., & Mahmoudi, M. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2016.05.011 · Cited by 386
Parale, V. G., Kim, T., Choi, H., Phadtare, V. D., Dhavale, R. P., Kanamori, K., & Park, H. (2024) · Advanced Materials · doi:10.1002/adma.202307772 · Cited by 146
Metadata
- Authors
- Mulik, S., Sotiriou-Leventis, C., Churu, G., Lu, H., & Leventis, N.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-07-17
- Volume
- 20
- Issue
- 15
- Pages
- 5035-5046
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1995490731
- Cited by
- 124
- References
- 3
- FWCI
- 2.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Cross-Linking 3D Assemblies of Nanoparticles into Mechanically Strong Aerogels by Surface-Initiated Free-Radical Polymerization. https://app.cochat.ai/papers/10.1021/cm800963h
- The paper
- Mulik, S., Sotiriou-Leventis, C., Churu, G., Lu, H., & Leventis, N. (2008). Cross-Linking 3D Assemblies of Nanoparticles into Mechanically Strong Aerogels by Surface-Initiated Free-Radical Polymerization. Chemistry of Materials. https://doi.org/10.1021/cm800963h
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.