Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 192

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Two-Step Sol−Gel Method-Based TiO2 Nanoparticles with Uniform Morphology and Size for Efficient Photo-Energy Conversion Devices

Lee, Sangwook, Cho, In-Sun, Lee, Ji Hae, Kim, Dong Hoe, Kim, Dong Wook, Kim, Jin Young, Shin, Hyunho, Lee, Jung-Kun, Jung, Hyun Suk, Park, Nam-Gyu, Kim, Kyungkon, Ko, Min Jae, Hong, Kug Sun · 2010 · Chemistry of Materials

Abstract

The performance of dye-sensitized solar cells (DSSCs) consisting of anatase TiO 2 nanoparticles that were synthesized via a two-step sol−gel process was investigated using electron transport and optical characterizations. Spherical nanoparticles with the average diameter of 20 nm, elongated nanorods with an aspect ratio (AR) of 5, and nanowires with AR = 10 were synthesized. The synthesized nanoparticles possess narrow size distribution, high crystallinity, and negligible surface defects and residual organics, which is very suitable for achieving highly efficient photovoltaic devices. The effect of particle size distribution on the performance of DSSC was characterized by comparing the synthesized TiO 2 nanoparticles and commercial TiO 2 nanoparticles (P25). In comparison with P25, the two-step sol−gel-grown nanoparticles significantly improved the photovoltaic conversion efficiency by 32.5%, because of a larger specific surface area, higher electrolyte penetration ability, and lower optical reflectance. Therefore, the photoelectrode of the two-step sol−gel-derived TiO 2 nanoparticles enhanced the adsorption of dye sensitizers (N719), promotes the transfer of photogenerated carriers, and decreases the ratio of reflected solar spectrum that is not harnessed. As a result, the energy conversion efficiency of DSSCs increased to 6.72% without the use of a scattering layer and coadsorbants. We also investigated the effect of aspect ratio of TiO 2 particles on photovoltaic characteristic. An increase in the aspect ratio of the synthesized nanomaterials resulted in an increase in carrier lifetime. A decrease in the density of grain boundaries suppresses the trapping of carriers and the subsequent recombination of electron−hole pairs. This study demonstrates that the two-step sol−gel-derived nanomaterials provide a way to achieve appreciable efficiency of photoconversion devices.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/cm902842k

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 192

Metadata

Authors
Lee, S., Cho, I.-S., Lee, J. H., Kim, D. H., Kim, D. W., Kim, J. Y., Shin, H., Lee, J.-K., Jung, H. S., Park, N.-G., Kim, K., Ko, M. J., & Hong, K. S.
Venue
Chemistry of Materials
Published
2010-02-24
Volume
22
Issue
6
Pages
1958-1965
ISSN
  • 0897-4756 (ISSN-L)
  • 1520-5002
OpenAlex
W2061912954
Cited by
192
References
2
FWCI
9.34
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.