Lignin Depolymerization into Aromatic Monomers over Solid Acid Catalysts
The DOI matches its Crossref record; 79 of the 84 references it cites were found in a registry or an index.
Abstract
It is imperative to develop an efficient and environmentally benign pathway to valorize profusely available lignin, a component of nonedible lignocellulosic materials, into value-added aromatic monomers, which can be used as fuel additives and platform chemicals. To convert lignin, earlier studies used mineral bases (NaOH, CsOH) or supported metal catalysts (Pt, Ru, Pd, Ni on C, SiO 2, Al 2 O 3, etc.) under a hydrogen atmosphere, but these methods face several drawbacks such as corrosion, difficulty in catalyst recovery, sintering of metals, loss of activity, etc. Here we show that under an inert atmosphere various solid acid catalysts can efficiently convert six different types of lignins into value-added aromatic monomers. In particular, the SiO 2 –Al 2 O 3 catalyst gave exceptionally high yields of ca. 60% for organic solvent soluble extracted products with 95 ± 10% mass balance in the depolymerization of dealkaline lignin, bagasse lignin, and ORG and EORG lignins at 250 °C within 30 min. GC, GC-MS, HPLC, LC-MS, and GPC analysis of organic solvent soluble extracted products confirmed the formation of aromatic monomers with ca. 90% selectivity. In the products, confirmation of retention of aromatic nature as present in lignin and the appearance of several functional groups has been carried out by FT-IR and 1 H and 13 C NMR studies. Further, isolation of major products by column chromatography was carried out to obtain aromatic monomers in pure form and their characterization by NMR is presented. A detailed characterization of six different types of lignins obtained from various sources helped in substantiating the catalytic results obtained in these reactions. A meticulous study on fresh and spent catalysts revealed that the amorphous catalysts are preferred to obtain reproducible catalytic results.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“With a higher temperature, the HTL process (200-370 o C, 4-20 MPa) can convert the lignin-rich feedstock from the solid phase to valuable bio-oils such as aromatic monomer, dimer, and oligomer”
From Hydrothermal carbonization and liquefaction for sustainable production of hydrochar and aromatics (2021) · cites this paper as [65]
Citations
Cites
Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering
Huber, G. W., Iborra, S., & Corma, A. (2006) · Chemical Reviews · doi:10.1021/cr068360d · Cited by 7,664
Hydrolysis of lignocellulosic materials for ethanol production: a review
Sun, Y., & Cheng, J. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00212-7 · Cited by 6,070
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Lignin Valorization: Improving Lignin Processing in the Biorefinery
Ragauskas, A. J., Beckham, G. T., Biddy, M. J., Chandra, R., Chen, F., Davis, M. F., Davison, B. H., Dixon, R. A., Gilna, P., Keller, M., et al. (2014) · Science · doi:10.1126/science.1246843 · Cited by 4,125
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Perlack, R. D. (2005) · doi:10.2172/885984 · Cited by 2,085
Lignins. Occurrence, Formation, Structure and Reactions
Sarkanen, K. V., & Ludwig, C. H. (1971) · Medical Entomology and Zoology · Cited by 2,008
Lignin chemistry?past, present and future
Adler, E. (1977) · Wood Science and Technology · doi:10.1007/bf00365615 · Cited by 1,759
Production of Liquid Alkanes by Aqueous-Phase Processing of Biomass-Derived Carbohydrates
Huber, G. W., Chheda, J. N., Barrett, C. J., & Dumesic, J. A. (2005) · Science · doi:10.1126/science.1111166 · Cited by 1,678
Phase Modifiers Promote Efficient Production of Hydroxymethylfurfural from Fructose
Román-Leshkov, Y., Chheda, J. N., & Dumesic, J. A. (2006) · Science · doi:10.1126/science.1126337 · Cited by 1,670
Research works printed but not linked: 3
- Lin, S. Y.; Lin, I. S.Ullmann’s Encylcopedia of Industrial Chemistry,5th ed.VCH:Weinheim, Germany, 1990; Vol.15, p305.
- Burgess, C. E.; Clifford, D. J.; Horvath, J. R.Preprints of Papers: American Chemical Society, Division of Fuel Chemistry;American Chemical Society:Washington, DC, 2002; Vol.47, pp376–379
- Sjöström, E.Wood Chemistry; Fundamental and Applications;Academic Press:New York, 1981; p223.
Cited by
Items 101–200 of 355
Matsagar, B. M., Kang, T.-C., Wang, Z., Yoshikawa, T., Nakasaka, Y., Masuda, T., Chuang, L.-C., & Wu, K. C. ‐. (2019) · Reaction Chemistry & Engineering · doi:10.1039/c8re00304a · Cited by 59
Guan, W., Chen, X., Zhang, J., Hu, H., & Liang, C. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.04.078 · Cited by 54
Theoretical insight into the hydrogenolysis mechanism of lignin dimer compounds based on experiments
Zhu, C., Cao, J., Feng, X., Zhao, X.-Y., Zhen, Y., Li, J., Zhao, M., Zhao, Y., & Bai, H. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.10.094 · Cited by 54
Bernt, C. M., Bottari, G., Barrett, J. A., Scott, S. L., Barta, K., & Ford, P. C. (2015) · Catalysis Science & Technology · doi:10.1039/c5cy01555c · Cited by 58
Zhou, M., Sharma, B. K., Li, J., Zhao, J., Xu, J., & Jiang, J. (2018) · Fuel · doi:10.1016/j.fuel.2018.10.144 · Cited by 53
Bjelić, A., Likozar, B., & Grilc, M. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125712 · Cited by 53
Guan, W., Chen, X., Tsang, C. W., Hu, H., & Liang, C. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c08478 · Cited by 51
Cheah, Y. W., Salam, M. A., Sebastian, J., Ghosh, S., Arora, P., Öhrman, O., Olsson, L., & Creaser, D. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.109614 · Cited by 51
Zhang, Y., Huo, F. W., Wang, Y., Xia, Y., Tan, X., Zhang, S., & He, H. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00078 · Cited by 56
“Recently, efforts have been devoted to the decomposition of β-O-4 ether bond by solvolysis (Ma et al., 2014; Deepa and Dhepe, 2015; Katahira et al., 2016), oxidation (Prado et al.”
BackgroundA review on the separation of lignin depolymerized products
Wu, Z. L., Jiang, Y., Wang, X., Xu, J., & Hu, L. (2022) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-021-02266-3 · Cited by 51
Zhang, W., Meng, T., Tang, J., Zhuang, W., Zhou, Y. T., & Wang, J. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02002 · Cited by 49
Wang, A., & Song, H. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.08.026 · Cited by 49
Mankar, A. R., Modak, A., & Pant, K. K. (2021) · Advanced Sustainable Systems · doi:10.1002/adsu.202100299 · Cited by 52
Zhang, J., Ibrahim, M., Collière, V., Asakura, H., Tanaka, T., Teramura, K., Philippot, K., & Yan, N. (2016) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2016.01.014 · Cited by 49
Lignin and metal–organic frameworks: mutual partners on the road to sustainability
Li, R., Huang, D., Lei, L., Chen, S., Chen, Y., Wang, G., Du, L., Zhou, W., Tao, J., & Chen, H. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta09241g · Cited by 47
Enhanced Acid-Catalyzed Lignin Depolymerization in a Continuous Reactor with Stable Activity
Nandiwale, K. Y., Danby, A. M., Ramanathan, A., Chaudhari, R. V., Motagamwala, A. H., Dumesic, J. A., & Subramaniam, B. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06556 · Cited by 49
Chang, L., Shi, J., Zhang, K., Wang, Y., Tang, Z., & Chen, M. (2022) · Fuel · doi:10.1016/j.fuel.2022.123249 · Cited by 46
Pyrolysis kinetic of alkaline and dealkaline lignin using catalyst
Damayanti, D., & Wu, H. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1401-6 · Cited by 44
“Dealkaline lignin have high molecular, the molecular weight of dealkaline lignin is 60,000 g/mol [14].”
BackgroundZirconium-Incorporated Mesoporous Silicates Show Remarkable Lignin Depolymerization Activity
Nandiwale, K. Y., Danby, A. M., Ramanathan, A., Chaudhari, R. V., & Subramaniam, B. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01344 · Cited by 47
Yang, Y., Song, W., Hur, H., Kim, T., & Ghatge, S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.144 · Cited by 44
Singh, S. K., & Dhepe, P. L. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b03375 · Cited by 44
Self-citationZakaria, S. M., Idris, A., Chandrasekaram, K., & Alias, Y. B. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.112885 · Cited by 44
Ma, Z., Ghosh, A., Asthana, N., & van Bokhoven, J. (2017) · ChemCatChem · doi:10.1002/cctc.201601674 · Cited by 41
Selective utilization of methoxy groups in lignin for N -methylation reaction of anilines
Mei, Q., Shen, X., Liu, H., Liu, H., Xiang, J., & Han, B. (2018) · Chemical Science · doi:10.1039/c8sc03006e · Cited by 42
Nanthagal, K., Khoonsap, S., Harnchana, V., Suphasorn, P., Chanlek, N., Sinthiptharakoon, K., Lapawae, K., & Amnuaypanich, S. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c03197 · Cited by 42
Panyadee, R., Posoknistakul, P., Jonglertjunya, W., Kim‐Lohsoontorn, P., Laosiripojana, N., Matsagar, B. M., Wu, K. C. ‐., & Sakdaronnarong, C. K. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04246 · Cited by 41
Alkali lignin degradation with aqueous ammonium-based ionic liquid solutions
Tolesa, L. D., Gupta, B. S., Tiwikrama, A. H., Wu, Y.-C., & Lee, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120724 · Cited by 42
Catalytic depolymerization of organosolv sugarcane bagasse lignin in cooperative ionic liquid pairs
Li, Y., Cai, Z., Liao, M., Long, J., Zhao, W., Chen, Y., & Li, X. (2017) · Catalysis Today · doi:10.1016/j.cattod.2017.04.059 · Cited by 40
ZSM-5 decrystallization and dealumination in hot liquid water
Maag, A. R., Tompsett, G. A., Tam, J., Ang, C. A., Azimi, G., Carl, A. D., Huang, X., Smith, L. J., Grimm, R. L., Bond, J. Q., et al. (2019) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp01490j · Cited by 40
Xiang, S., Dong, L., Wang, Z., Han, X., Guo, Y. Q., Liu, X., Gong, X., & Wang, Y. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2022.10.041 · Cited by 40
Insight into lignin oxidative depolymerization in ionic liquids and deep eutectic solvents
Mukesh, C., Guo, H., Qin, H., Liu, Y., & Ji, X. (2024) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2024.107305 · Cited by 39
Kong, J., Li, B., & Zhao, C. (2016) · RSC Advances · doi:10.1039/c6ra16977e · Cited by 40
Effects of Extraction Methods on Structure and Valorization of Corn Stover Lignin by a Pd/C Catalyst
Peng, C., Chen, Q., Guo, H., Hu, G., Li, C., Wen, J., Wang, H., Zhang, T., Zhao, Z. K., Sun, R., et al. (2016) · ChemCatChem · doi:10.1002/cctc.201601501 · Cited by 39
Luo, L., Yang, J., Yao, G., & Jin, F. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.03.062 · Cited by 40
Wang, S., Li, Y., Wen, X., Fang, Z., Zheng, X., Di, J., Li, H., Li, C., & Fang, J. Y. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.114430 · Cited by 39
Kumar, A., Biswas, B., Kaur, R., Rani, R., Krishna, B. B., & Bhaskar, T. (2023) · Sustainable Energy & Fuels · doi:10.1039/d3se00045a · Cited by 40
Ma, Q., Liu, Q., Li, W., Ma, L., Wang, J., Liu, M., & Zhang, Q. (2016) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.09.003 · Cited by 38
Singh, D., & Dhepe, P. L. (2019) · Molecular Catalysis · doi:10.1016/j.mcat.2019.110525 · Cited by 38
Self-citationDepolymerization of Lignin Using a Solid Base Catalyst
Chaudhary, R., & Dhepe, P. L. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b00621 · Cited by 37
Self-citationZhou, X. P., Wei, X., Liu, Z., Lv, J.-H., Wang, Y.-L., Li, Z., & Zong, Z. (2017) · Catalysis Communications · doi:10.1016/j.catcom.2017.04.042 · Cited by 37
Characterization and properties of phenolic resin doped modified lignin
Li, P., Su, W., Zheng, Y., Wang, M., Wang, H., Zhou, H., & Wu, W. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.133430 · Cited by 39
Singh, S. K., Banerjee, S., Vanka, K., & Dhepe, P. L. (2017) · Catalysis Today · doi:10.1016/j.cattod.2017.09.050 · Cited by 37
Self-citationGuan, W., Chen, X., Li, C., Zhang, J., Tsang, C., Hu, H., Li, S., & Liang, C. (2019) · Molecular Catalysis · doi:10.1016/j.mcat.2019.01.015 · Cited by 36
Effects of solvents in the depolymerization of lignin into value-added products: a review
Raikwar, D., Majumdar, S., & Shee, D. (2021) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-021-02030-7 · Cited by 39
Totong, S., Daorattanachai, P., Quitain, A. T., Kida, T., & Laosiripojana, N. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b01973 · Cited by 36
Cai, Z., Li, Y., He, H., Zeng, Q., Long, J., Wang, L., & Li, X. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03247 · Cited by 35
Syed, M. W., Kazmi, W. W., Hussain, A., Shah, S. F. A., Kariim, I., Mehdi, A. M., Omer, A., Bhatti, A. H., Eze, F., & Bhatti, U. H. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118615 · Cited by 35
Li, Z., Long, J., Zeng, Q., Wu, Y., Cao, M., Liu, S., & Li, X. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01307 · Cited by 33
Karnitski, A., Choi, J.-W., Suh, D. J., Yoo, C., Lee, H., Kim, K. H., Kim, C. S., Kim, K., & Ha, J. (2022) · Catalysis Today · doi:10.1016/j.cattod.2022.07.012 · Cited by 32
Singh, S. K., & Dhepe, P. L. (2017) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-017-1435-9 · Cited by 30
Self-citationLi, P., Ouyang, Y., Xiao, G., Zhao, Y., Sarina, S., Baeyens, J., Su, H., & Zhu, H. (2021) · Green Chemistry · doi:10.1039/d1gc01953h · Cited by 30
“It has a high molecular weight and is contaminated with Na and S.[70,71] Deepa and Dhepe determined the molecular weight of this lignin sample to be 60,000 g·mol-1 (Mn) by MALDI-TOF.”
BackgroundKollman, M. S., Jiang, X., Sun, R., Zhang, X., Li, W., Chang, H., & Jameel, H. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138464 · Cited by 33
A new route to synthesize aryl acetates from carbonylation of aryl methyl ethers
Mei, Q., Yang, Y., Li, S., Li, S., Han, B., & Han, B. (2018) · Science Advances · doi:10.1126/sciadv.aaq0266 · Cited by 30
An Overview of Solid Acid Catalysts in Lignocellulose Biorefineries
Balasubramanian, S., Shanmugam, R., Basha, A. C., Sriariyanun, M., Shanmugam, S. R., & Venkatachalam, P. (2025) · Catalysts · doi:10.3390/catal15050432 · Cited by 29
Bhaumik, P., & Dhepe, P. L. (2016) · ChemCatChem · doi:10.1002/cctc.201600784 · Cited by 28
Self-citationDi, B., Li, Z., Yin, L., Wang, X., Zhu, Y., Qi, W. D., & Tian, Y. (2021) · Polymer Engineering and Science · doi:10.1002/pen.25664 · Cited by 27
Liu, X., Wang, L., Zhai, L., Wu, C., & Xu, H. (2022) · Green Chemistry · doi:10.1039/d2gc00878e · Cited by 27
The chemical and physical properties of lignin bio-oils, facts and needs
Gracia‐Vitoria, J., Corderí, S., Féghali, E., Ortiz, P., Eevers, W., Triantafyllidis, K. S., & Vanbroekhoven, K. (2023) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2023.100781 · Cited by 32
Lin, Y., & Lu, S. (2019) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2019.02.007 · Cited by 28
Wang, K., Qiu, J., Huang, W., Yuan, Z., Bing, W., & Wen, Y. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.139730 · Cited by 26
Zhang, J., Ge, Y., Xiong, S., & Li, Z. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.130115 · Cited by 25
Chowdari, R. K., Ganji, P., & Likozar, B. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c05174 · Cited by 25
Shu, R., Xu, Y. Q., Ma, L., Zhang, Q., Wang, T., Chen, P., & Wu, Q. (2016) · RSC Advances · doi:10.1039/c6ra16725j · Cited by 24
Metal-Incorporated Mesoporous Silicates: Tunable Catalytic Properties and Applications
Ramanathan, A., & Subramaniam, B. (2018) · Molecules · doi:10.3390/molecules23020263 · Cited by 24
“and 54% yield of THF soluble products) [64].”
BackgroundNovel Synthesis of Immobilized Brønsted‐ Acidic Ionic Liquid: Application in Lignin Depolymerization
Singh, S. K., & Dhepe, P. L. (2018) · ChemistrySelect · doi:10.1002/slct.201703050 · Cited by 24
Self-citationEffective isomerization of glucose to fructose by Sn-MFI/MCM-41 composites as Lewis acid catalysts
Lu, S., Lyu, J., Han, X., Bai, P., & Guo, X. (2020) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2020.11.010 · Cited by 24
Zhang, B., Li, W., Zhang, T., Li, X., Ogunbiyi, A. T., Chen, K., & Shen, C. (2021) · Fuel · doi:10.1016/j.fuel.2021.121509 · Cited by 25
Cui, C., Chen, X., Liu, C., Zhu, Y., Zhu, L., Ouyang, J., Shen, Y., Zhou, Z., & Qi, F. (2021) · Analytical Chemistry · doi:10.1021/acs.analchem.1c02710 · Cited by 23
Product Distribution of Chemical Product Using Catalytic Depolymerization of Lignin
Damayanti, D., Wulandari, Y. R., & Wu, H. (2020) · BULLETIN OF CHEMICAL REACTION ENGINEERING AND CATALYSIS · doi:10.9767/bcrec.15.2.7249.432-453 · Cited by 24
Li, Y., Liu, M., Tang, Q., Liang, K., Sun, Y., Yu, Y., Lou, Y., Liu, Y., & Yu, H. (2024) · ChemSusChem · doi:10.1002/cssc.202301912 · Cited by 23
Wu, K., Wang, J., Zhu, Y., Wang, X., Yang, C., Liu, Y., Liu, C., Lu, H., Liang, B., & Li, Y. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b01807 · Cited by 22
Renewable antioxidant additive for biodiesel obtained from black liquor
Lavoie, J., Ghislain, T., Bahl, E., Arauzo, J., Gonzalo, A., Gil-Lalaguna, N., & Sánchez, J. L. (2019) · Fuel · doi:10.1016/j.fuel.2019.115689 · Cited by 23
Song, Y., Park, J., Lim, C., & Lee, D. W. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b05569 · Cited by 23
Liu, G., Zong, Z., Liu, F., Ma, Z.-H., Wei, X., Kang, Y.-H., Fan, X., Ma, F., Liu, J., & Mo, W. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.9b04151 · Cited by 21
Controlled synthesis of charged lignin nanocarriers by electrospray
Zhou, H., Modi, S., & Biswas, P. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.129314 · Cited by 22
Wang, Y., Ding, B., He, J., Ding, Z., & Hou, Z. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00038 · Cited by 21
Bassett, A. W., Rogers, D. P., Sadler, J. M., Scala, J. J. L., Wool, R. P., & Stanzione, J. F. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43817 · Cited by 21
Cheng, Y., Zhao, P.-X., Alma, M. H., Sun, D., Li, R., & Jiang, J. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.07.022 · Cited by 21
Ma, Z., Ghosh, A. K., Asthana, N. S., & van Bokhoven, J. A. (2018) · ChemCatChem · doi:10.1002/cctc.201800670 · Cited by 22
Highly selective cleavage C–O ether bond of lignin model compounds over Ni/CaO–H-ZSM-5 in ethanol
Guo, J., Ma, Y. L., Yu, J., Gao, Y. J., Ning, X., & Wu, X. Y. (2019) · BMC Chemistry · doi:10.1186/s13065-019-0557-z · Cited by 21
“Application of acid catalysts could lead to equipment corrosion, which was not conducive to recovery, and even requires high temperatures (> 340 °C) to obtain aromatics and gases [14, 15].”
BackgroundMicrowave-Assisted Catalytic Solvolysis of Lignin to Phenols: Kinetics and Product Characterization
Dhar, P., & Vinu, R. (2018) · ACS Omega · doi:10.1021/acsomega.8b01509 · Cited by 21
“Deepa and Dhepe 42 carried out lignin depolymerization over solid acid catalysts such as zeolites and sulfated zirconia for the production of aromatic monomers.”
Wang, C., Li, M., & Fang, Y. (2019) · Green Chemistry · doi:10.1039/c8gc03788d · Cited by 21
Mankar, A. R., Ahmạd, E., & Pant, K. K. (2021) · Materials Science for Energy Technologies · doi:10.1016/j.mset.2021.08.006 · Cited by 27
Facile Lignin Extraction and Application as Natural UV Blockers in Cosmetic Formulations
Duy, N. V., Tsygankov, P., & Menshutina, N. V. (2024) · ChemEngineering · doi:10.3390/chemengineering8040069 · Cited by 20
Scaling-Up Catalytic Depolymerisation of Lignin: Performance Criteria for Industrial Operation
Kouris, P. D., Huang, X., Boot, M. D., & Hensen, E. J. M. (2018) · Topics in Catalysis · doi:10.1007/s11244-018-1048-5 · Cited by 20
Basic carrier promoted Pt-catalyzed hydrogenolysis of alkaline lignin
Zhang, J., Su, Z., Wu, Z., Wang, P., & Xiao, F. (2020) · Catalysis Today · doi:10.1016/j.cattod.2020.06.027 · Cited by 20
Shu, R., Zhou, L., Zhu, Z., Luo, B., You, H., Zhong, Z., & He, Y. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.02.027 · Cited by 20
Kurnia, I., Yoshida, A., Situmorang, Y. A., Kasai, Y., Abudula, A., & Guan, G. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b00488 · Cited by 20
Wang, H., Han, H., Sun, E., Zhang, Y., Li, J., Chen, Y., Song, H., Zhao, H., & Kang, Y. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.05.013 · Cited by 19
Awan, I. Z., Beltrami, G., Bonincontro, D., Gimello, O., Cacciaguerra, T., Tanchoux, N., Martucci, A., Albonetti, S., Cavani, F., & Renzo, F. D. (2020) · Applied Catalysis A General · doi:10.1016/j.apcata.2020.117929 · Cited by 20
Harnessing zeolite catalyst for the cleavage of targeted chemical bonds in lignin
Wang, J., Hong, S., Wang, B., Shen, X., Wen, J., & Yuan, T. (2023) · Chem Catalysis · doi:10.1016/j.checat.2023.100797 · Cited by 19
TiN‐Cu Heterogeneous Nanocatalysts for Effective Depolymerisation of Oxidised Lignin
Rashidi, M., Targinovna, K. M., Aslam, W., & Beltramini, J. N. (2018) · ChemistrySelect · doi:10.1002/slct.201702771 · Cited by 19
Lignin‐polystyrene composite foams through high internal phase emulsion polymerization
Zhang, Z., Mulyadi, A., Kuang, X., Liu, W., Li, V., Gogoi, P., Liu, X., & Deng, Y. (2018) · Polymer Engineering and Science · doi:10.1002/pen.25046 · Cited by 20
Cai, T., Deng, Q., Peng, H., Zhong, J., Gao, R., Wang, J., Zeng, Z., Zou, J., & Deng, S. (2020) · Green Chemistry · doi:10.1039/d0gc00195c · Cited by 19
Feng, C., Du, J., Wei, S., Qin, C., Liang, C., & Yao, S. (2020) · Royal Society Open Science · doi:10.1098/rsos.200967 · Cited by 21
“93%, but the rate of dissolution decreased as it degraded into smaller fragments [32].”
BackgroundStudy of Mo‐based sepiolite catalyst on depolymerization of lignin under supercritical ethanol
Tang, Z., Wang, Y., Chen, M., Zhang, J., Wang, C., Yang, Z., Zhang, H., & Wang, J. (2019) · International Journal of Energy Research · doi:10.1002/er.4901 · Cited by 18
Hydrothermal Depolymerization of Kraft Lignins with Green C 1 –C 3 Alcohol–Water Mixtures
Guo, M., Maltari, R., Zhang, R., Kontro, J., Ma, E., & Repo, T. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01968 · Cited by 18
Fang, J. Y., Zhang, Y., Wang, Y., Li, Y., Li, H., & Li, C. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.113128 · Cited by 18
Controllable alkylation of benzene with mixed olefins for producing C8-C15 aromatics in jet fuel
Guo, S., Wu, Y., Jin, T., Wang, H., Dong, C., Zhang, J., & Ding, M. (2020) · Fuel · doi:10.1016/j.fuel.2020.117890 · Cited by 18
Jiang, W., Cao, J., Yang, Z., Xie, J.-X., Zhao, L., Zhu, C., Zhang, C., Zhao, X.-Y., Zhao, Y., & Zhang, J. (2022) · Applied Catalysis A General · doi:10.1016/j.apcata.2022.118516 · Cited by 18
Metadata
- Authors
- Deepa, A. K., & Dhepe, P. L.
- Affiliations
- National Chemical Laboratory (IN)
- Corresponding author
- Dhepe, Paresh L.
- ORCID
- Dhepe, Paresh L.
- Venue
- ACS Catalysis
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-12-12
- Volume
- 5
- Issue
- 1
- Pages
- 365-379
- ISSN
- 2155-5435 (ISSN-L)
- OpenAlex
- W2031789679
- Cited by
- 346
- References
- 84
- Citations by year
- 2026: 14 · 2025: 31 · 2024: 23 · 2023: 20 · 2022: 34 · 2021: 34 · 2020: 42 · 2019: 41 · 2018: 44 · 2017: 26 · 2016: 25 · 2015: 11 · 2014: 1
- FWCI
- 10.91
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Catalysis (publishedVersion)
- Funders
- Council of Scientific and Industrial Research
- Topics
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Chemical Engineering › Catalysis › Catalysis for Biomass Conversion
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- lignin depolymerization, aromatic monomers, solid acid catalysts, lignin valorization, catalyst deactivation, spent catalyst characterization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.