The DOI matches its Crossref record.
Production of Hydrogen and/or Syngas (H2 + CO) via Steam Gasification of Biomass-Derived Chars
Abstract
Steam gasification of two biomass-derived chars was studied at 700, 750, and 800 °C in a fixed bed microreactor at different steam flow rates in the range of 1.25 to 10 g/h/g of char. The chars used in the present study were (i) bagasse char obtained from Natural Resources Canada, CANMET Energy Technology, Ontario (produced by Dynamotive Technologies Corp., Vancouver, BC), and (ii) commercial char obtained from ENSYN Technologies Inc., Ontario (produced during the fast pyrolysis of biomass using their RTI process). Both chars were highly reactive, particularly at 800 °C with steam flow rate of 5 and 10 g/h/g of char. In the case of bagasse char, maximum conversion of 81% was achieved at 800 °C with a steam flow rate of 10 g/h/g of char, whereas maximum conversion of 69% for commercial char was obtained at 800 °C with steam flow rates of 5 and 10 g/h/g of char. The product gas obtained was mainly a mixture of H 2, CO, CO 2, and CH 4 with a high H 2 /CO molar ratio (about 4:7 for bagasse char and 9:15 for commercial char) at a temperature of 800 °C and a steam flow rate of about 10 g/h/g of char. Under the present reaction conditions, synthesis gas (H 2 + CO) produced by steam gasification of bagasse char and commercial char was in the range of 80−88 mol % and 77−84 mol %, respectively. The heating value of the product gas was in the range of 270−290 Btu/scf for bagasse char and 250−280 Btu/scf for commercial char. The results suggest that there is a strong potential for producing hydrogen and syngas from biomass-derived chars by a simple steam gasification process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering
Huber, G. W., Iborra, S., & Corma, A. (2006) · Chemical Reviews · doi:10.1021/cr068360d · Cited by 7,664
Biofuels Production through Biomass Pyrolysis—A Technological Review
Jahirul, M., Rasul, M., Chowdhury, A., & Ashwath, N. (2012) · Energies · doi:10.3390/en5124952 · Cited by 1,427
Turner, J., Sverdrup, G., Mann, M. K., Maness, P.-C., Kroposki, B., Ghirardi, M., Evans, R. J., & Blake, D. (2008) · International Journal of Energy Research · doi:10.1002/er.1372 · Cited by 1,032
Sewage sludge pyrolysis for liquid production: A review
Fonts, I., Gea, G., Azuara, M., Ábrego, J., & Arauzo, J. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.02.070 · Cited by 592
Producing microbial polyhydroxyalkanoate (PHA) biopolyesters in a sustainable manner
Koller, M., Maršálek, L., de Sousa Dias, M. M., & Braunegg, G. (2017) · New Biotechnology · doi:10.1016/j.nbt.2016.05.001 · Cited by 532
Metadata
- Authors
- Chaudhari, S. T., Dalai, A. K., & Bakhshi, N. N.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-06-11
- Volume
- 17
- Issue
- 4
- Pages
- 1062-1067
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W1988814259
- Cited by
- 161
- References
- 0
- FWCI
- 1.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Production of Hydrogen and/or Syngas (H2 + CO) via Steam Gasification of Biomass-Derived Chars. https://app.cochat.ai/papers/10.1021/ef030017d
- The paper
- Chaudhari, S. T., Dalai, A. K., & Bakhshi, N. N. (2003). Production of Hydrogen and/or Syngas (H2 + CO) via Steam Gasification of Biomass-Derived Chars. Energy & Fuels. https://doi.org/10.1021/ef030017d
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.