The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Low-Temperature Hydrothermal Treatment of Biomass: Effect of Reaction Parameters on Products and Boiling Point Distributions
Abstract
Low-temperature hydrothermal treatment of waste biomass (sawdust) was performed using an autoclave at various temperatures of 180, 250, and 280 °C for 15 min and 60 min. The oil product was obtained from both liquid and solid portions of reaction products from the autoclave, and the composition of oil products was investigated separately. At high reaction temperature, i.e., 250 °C and 280 °C, the longer reaction time led to decreased oil yield; at low reaction temperature (180 °C), the oil yield was found to increase with the increase of reaction time. The oil1 (extracted from the liquid portion) consists of low-boiling-point compounds, whereas oil2 (extracted from the solid portion) contained both low- and high-boiling-point oxygenated hydrocarbons. Ca(OH) 2 was found to be effective on liquefaction of biomass in terms of both oil yield and composition. The volatility distribution of oxygenated hydrocarbons in oil1 and oil2 was studied by using a C-NP gram which can be used as a tool for characterizing biomass-derived oil products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose decomposition in hot-compressed water with alkali or nickel catalyst
Minowa, T., Zhen, F., & Ogi, T. (1998) · The Journal of Supercritical Fluids · doi:10.1016/s0896-8446(98)00059-x · Cited by 387
Pyrolysis of Lignins: Experimental and Kinetics Studies
Ferdous, D., Dalai, A. K., Bej, S. K., & Thring, R. W. (2002) · Energy & Fuels · doi:10.1021/ef0200323 · Cited by 310
The effect of cations on the thermal decomposition of lignins
Jakab, E., Faix, O., Till, F., & Székely, T. (1993) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(93)80039-3 · Cited by 72
Cited by
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Engineering carbon materials from the hydrothermal carbonization process of biomass
Hu, B., Wang, K., Wu, L., Yu, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.200902812 · Cited by 1,765
Catalytic conversion of lignocellulosic biomass to fine chemicals and fuels
Zhou, C.-H., Xia, X., Lin, C.-X., Tong, D.-S., & Beltramini, J. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15124j · Cited by 1,420
A review on process conditions for optimum bio-oil yield in hydrothermal liquefaction of biomass
Akhtar, J., & Amin, N. A. S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.11.054 · Cited by 1,059
Hydrothermal liquefaction and gasification of Nannochloropsis sp.
Brown, T. M., Duan, P., & Savage, P. E. (2010) · Energy & Fuels · doi:10.1021/ef100203u · Cited by 745
Metadata
- Authors
- Karagöz, S., Bhaskar, T., Muto, A., Sakata, Y., & Uddin, M. A.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-12-05
- Volume
- 18
- Issue
- 1
- Pages
- 234-241
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W1976243341
- Cited by
- 158
- References
- 3
- FWCI
- 2.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.