Water Density Effect on Lignin Gasification over Supported Noble Metal Catalysts in Supercritical Water
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Gasification of lignin and 4-propylphenol, which is a model of low-molecular weight compounds from lignin, over supported metal catalysts in supercritical water was studied at 673 K. Supported ruthenium catalysts were active in supercritical water. The catalytic gasification rate was enhanced by the increase of water density. The gasification of lignin proceeded in supercritical water through two steps: (i) decomposition of lignin to low-molecular weight compounds and (ii) gasification of the low-molecular weight compounds over metal catalysts. The rate of 4-propylphenol gasification was not affected by the water density; this was different from lignin gasification. These results indicated that the first step (decomposition to low-molecular weight compounds) in the lignin gasification was enhanced by increasing the water density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Roles of Water for Chemical Reactions in High-Temperature Water
Akiya, N., & Savage, P. E. (2002) · Chemical Reviews · doi:10.1021/cr000668w · Cited by 1,581
Sınaǧ, A., Kruse, A., & Rathert, J. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030475+ · Cited by 327
Chemical Reactions of C1 Compounds in Near-Critical and Supercritical Water
Watanabe, M., Sato, T., Inomata, H., Smith, R. L., Arai, K., Kruse, A., & Dinjus, E. (2004) · Chemical Reviews · doi:10.1021/cr020415y · Cited by 282
Self-citationOkuda, K., Umetsu, M., Takami, S., & Adschiri, T. (2004) · Fuel Processing Technology · doi:10.1016/j.fuproc.2003.11.027 · Cited by 187
Cited by
Peterson, A. A., Vogel, F., Lachance, R. P., Fröling, M., Antal, Jr., & Tester, J. W. (2008) · Energy & Environmental Science · doi:10.1039/b810100k · Cited by 2,132
Liquid fuels, hydrogen and chemicals from lignin: A critical review
Azadi, P., Inderwildi, O. R., Farnood, R., & King, D. A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.022 · Cited by 1,066
Figueiredo, P., Lintinen, K., Hirvonen, J. T., Kostiainen, M. A., & Santos, H. A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.12.001 · Cited by 956
Review of catalytic supercritical water gasification for hydrogen production from biomass
Guo, Y., Wang, S. Z., Xu, D. H., Gong, Y. M., Ma, H. H., & Tang, X. Y. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.08.012 · Cited by 562
Hydrothermal conversion of lignin: A review
Kang, S., Li, X., Fan, J., & Chang, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.07.013 · Cited by 552
Towards quantitative catalytic lignin depolymerization
Roberts, V. M., Stein, V., Reiner, T., Lemonidou, A., Li, X., & Lercher, J. A. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201002438 · Cited by 543
Supercritical water gasification of biomass for hydrogen production
Reddy, S. N., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.02.125 · Cited by 531
Catalytic hydrothermal gasification of biomass
Elliott, D. C. (2008) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.74 · Cited by 384
Kinetic Analysis of Lignin Hydrothermal Conversion in Sub- and Supercritical Water
Yong, T. L.-K., & Matsumura, Y. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400600x · Cited by 149
Metadata
- Authors
- Osada, M., Sato, O., Watanabe, M., Arai, K., & Shirai, M.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-04-12
- Volume
- 20
- Issue
- 3
- Pages
- 930-935
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2009623644
- Cited by
- 110
- References
- 4
- FWCI
- 3.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.