Effect of the Temperature on the Composition of Lignin Pyrolysis Products
The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Abstract
The temperature dependence of the pyrolysis products of two types of lignin (Alcell lignin and Asian lignin) was investigated using pyrolysis−gas chromatography−mass spectrometry (PyGC−MS). About 50 compounds were identified and quantified for each type of lignin over a temperature range of 400−800 °C. The maximum yield of phenolic compounds was obtained at 600 °C for both lignins, which was 17.2% for Alcell lignin and 15.5% for Asian lignin. Most of the phenolic compounds had an individual yield of less than 1%; however, for Alcell lignin, 5-hydroxyvanillin was the highest yield at 4.29 wt % on dry ash-free lignin, and for Asian lignin, 2-methoxy-4-vinylphenol was the highest yield at 4.15 wt % on dry ash-free lignin.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Primary stage of lignin pyrolysis containing more intense structural decomposition happens at the temperature range of 400–600 °C after initial stage, where phenolic compounds (which is both temperature induced and time induced) are the major components during this stage [146–148].”
From A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency (2022) · cites this paper as [147]
Citations
Cites
Comprehensive Handbook of Chemical Bond Energies
Luo, Y.-R. (2007) · CRC Press eBooks · doi:10.1201/9781420007282 · Cited by 3,881
Lignins. Occurrence, Formation, Structure and Reactions
Sarkanen, K. V., & Ludwig, C. H. (1971) · Medical Entomology and Zoology · Cited by 2,008
New group contribution method for estimating properties of pure compounds
Constantinou, L., & Gani, R. (1994) · AIChE Journal · doi:10.1002/aic.690401011 · Cited by 1,226
Principles and practice of biomass fast pyrolysis processes for liquids
Bridgwater, A. V. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00005-4 · Cited by 754
Self-citationMansouri, N.-E. E., & Salvadó, J. (2006) · Industrial Crops and Products · doi:10.1016/j.indcrop.2005.10.002 · Cited by 599
Beech Lignin—Proposal of a Constitutional Scheme
Nimz, H. (1974) · Angewandte Chemie International Edition in English · doi:10.1002/anie.197403131 · Cited by 378
Lignin pyrolysis products: Their structures and their significance as biomarkers
Saiz-Jimenez, C., & De Leeuw, J. W. (1986) · Organic Geochemistry · doi:10.1016/s0146-6380(86)80024-9 · Cited by 354
Analytical methods for determining functional groups in various technical lignins
El Mansouri, N.-E., & Salvadó, J. (2007) · Industrial Crops and Products · doi:10.1016/j.indcrop.2007.02.006 · Cited by 341
Thermal decomposition of milled wood lignins studied by thermogravimetry/mass spectrometry
Jakab, E., Faix, O., & Till, F. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00046-6 · Cited by 321
Cited by
Items 101–200 of 343
Fast pyrolysis of Kraft lignins fractionated by ultrafiltration
Shao, L., Zhang, X., Chen, F., & Xu, F. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.11.003 · Cited by 59
Babinszki, B., Sebestyén, Z., Jakab, E., Kőhalmi, L., Bozi, J., Várhegyi, G., Wang, L., Skreiberg, Ø., & Czégény, Z. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125567 · Cited by 58
Wang, W., Ren, X., Chang, J., Cai, L., & Shi, S. Q. (2015) · Fuel Processing Technology · doi:10.1016/j.fuproc.2015.06.048 · Cited by 61
Effects of chemical form of sodium on the product characteristics of alkali lignin pyrolysis
Guo, D.-L., Yuan, H.-Y., Yin, X.-L., Wu, C.-Z., Wu, S.-B., & Zhou, Z.-Q. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2013.10.057 · Cited by 57
Kumar, A., Kumar, A., Kumar, J., & Bhaskar, T. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121822 · Cited by 57
Understanding the product distribution from biomass fast pyrolysis
Patwardhan, P. R. (2018) · doi:10.31274/etd-180810-1964 · Cited by 57
Naron, D. R., Collard, F.-X., Tyhoda, L., & Görgens, J. F. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.12.015 · Cited by 54
Tetrabutylammonium Hydroxide 30-Hydrate as Novel Reaction Medium for Lignin Conversion
Yamamoto, K., Hosoya, T., Yoshioka, K., Miyafuji, H., Ohno, H., & Yamada, T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b02106 · Cited by 55
Identifying the primary reactions and products of fast pyrolysis of alkali lignin
Supriyanto, Usino, D. O., Ylitervo, P., Dou, J., Sipponen, M. H., & Richards, T. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2020.104917 · Cited by 54
“This is in agreement with the literature [14,15,42], where a maximum yield was achieved at 600 ◦ C for the formed phenolic compounds (mainly the methoxylated phenols).”
BackgroundResultLi, W., & Shi, J. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1121027 · Cited by 70
“The use of GC-MS as an analytical tool to investigate pyrolysis of lignin is dated back to the late of 1970s, when Kraft lignin was first attempted to be collected in a “captive sample”, only five phenolic compounds (phenol, guaiacol, cresol, 4-methylguaiacol, and 4-ethylguaiacol) were successfully quantified due to t…”
BackgroundMethodComposition Analysis of Organosolv Lignin and Its Catalytic Solvolysis in Supercritical Alcohol
Hu, J., Shen, D., Wu, S., Zhang, H., & Xiao, R. (2014) · Energy & Fuels · doi:10.1021/ef500068h · Cited by 52
Catalysis in Lignocellulosic Biorefineries: The Case of Lignin Conversion
Schutyser, W., Renders, T., den Bossche, G. V., den Bosch, S. V., Koelewijn, S.-F., Ennaert, T., & Sels, B. F. (2017) · Wiley eBooks · doi:10.1002/9783527699827.ch23 · Cited by 63
Theoretical study of the pyrolysis of vanillin as a model of secondary lignin pyrolysis
Wang, M., Liu, C., Xu, X., & Li, Q. (2016) · Chemical Physics Letters · doi:10.1016/j.cplett.2016.03.058 · Cited by 58
Detailed Kinetic Modeling of Lignin Pyrolysis for Process Optimization
Hough, B. R., Schwartz, D. T., & Pfaendtner, J. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02092 · Cited by 51
Iaccarino, A., Gautam, R., & Sarathy, S. M. (2021) · Sustainable Energy & Fuels · doi:10.1039/d0se01664k · Cited by 56
Sridevi, V., Suriapparao, D. V., Tukarambai, M., Terapalli, A., Potnuri, R., Rao, C. S., Gautam, R., Moorthy, J. V., & Kumar, C. S. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.127589 · Cited by 51
Cao, F., Xia, S., Yang, X., Wang, C., Wang, Q., Cui, C., & Zheng, A. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123809 · Cited by 52
Development of a Rhodococcus opacus Cell Factory for Valorizing Lignin to Muconate
Cai, C., Xu, Z., Mei-lin, X., Cai, M., & Jin, M. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06571 · Cited by 51
Wei, R., Feng, S., Long, H., Li, J., Yuan, Z., Cang, D., & Xu, C. C. (2017) · Energy · doi:10.1016/j.energy.2017.08.080 · Cited by 49
Structure–Reactivity Relationship in Fast Pyrolysis of Lignin into Monomeric Phenolic Compounds
Hu, J., Wu, S., Jiang, X., & Xiao, R. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03593 · Cited by 50
Charisteidis, I. D., Lazaridis, P. A., Fotopoulos, A. P., Pachatouridou, E., Μάτσακας, Λ., Rova, U., Christakopoulos, P., & Triantafyllidis, K. S. (2019) · Catalysts · doi:10.3390/catal9110935 · Cited by 51
Structural and Thermal Characterization of Novel Organosolv Lignins from Wood and Herbaceous Sources
Trubetskaya, A., Lange, H., Wittgens, B., Brunsvik, A., Crestini, C., Rova, U., Christakopoulos, P., Leahy, J. J., & Μάτσακας, Λ. (2020) · Processes · doi:10.3390/pr8070860 · Cited by 53
“This could be explained by the formation of large condensed and polyaromatic structures from guaiacol during heating of softwood lignin, whereas the HGS and GS lignins contain a high number of methoxy groups leading to less thermal stability on the basis of an altered reactivity [58,59].”
BackgroundVanillin production from native softwood lignin in the presence of tetrabutylammonium ion
Maeda, M., Hosoya, T., Yoshioka, K., Miyafuji, H., Ohno, H., & Yamada, T. (2018) · Journal of Wood Science · doi:10.1007/s10086-018-1766-0 · Cited by 47
Ibrahim, H. A.-H., & Ibrahim, H. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.77528 · Cited by 55
Yan, K., Liu, F., Chen, Q., Ke, M., Huang, X., Hu, W., Zhou, B., Zhang, X., & Yu, H. (2016) · Biotechnology for Biofuels · doi:10.1186/s13068-016-0489-y · Cited by 46
“This result provided a good evidence to explain why the EHRL of treated bamboo had higher char residue at the final temperature of TGA than that of untreated bamboo, because lignin with low methoxy group content (guaiacyl unit) could produce more char residue and the char yield is inversely proportional to the total a…”
BackgroundLi, W., Wanninayake, N., Gao, X., Li, M., Pu, Y., Kim, D. Y., Ragauskas, A. J., & Shi, J. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c03423 · Cited by 46
Jampa, S., Puente-Urbina, A., Ma, Z., Wongkasemjit, S., Luterbacher, J. S., & van Bokhoven, J. A. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05498 · Cited by 45
Yang, H., Norinaga, K., Li, J., Zhu, W., & Wang, H. (2018) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.09.022 · Cited by 44
Wu, Y., Liu, S., Chen, Y., Yang, Y., & Yang, H. (2023) · Fuel · doi:10.1016/j.fuel.2023.129549 · Cited by 48
Control of Pd catalyst selectivity with mixed thiolate monolayers
Lien, C.-H., & Medlin, J. W. (2016) · Journal of Catalysis · doi:10.1016/j.jcat.2016.04.001 · Cited by 44
Thio-assisted reductive electrolytic cleavage of lignin β-O-4 models and authentic lignin
Fang, Z., Flynn, M. G., Jackson, J. E., & Hegg, E. L. (2020) · Green Chemistry · doi:10.1039/d0gc03597a · Cited by 44
Reforming of lignin-derived tars over char-based catalyst using Py-GC/MS
Qian, K., & Kumar, A., V (2015) · Fuel · doi:10.1016/j.fuel.2015.08.064 · Cited by 42
Runnebaum, R. C., Nimmanwudipong, T., Limbo, R. R., Block, D. E., & Gates, B. C. (2011) · Catalysis Letters · doi:10.1007/s10562-011-0742-8 · Cited by 42
A computational study on thermal decomposition mechanism of β-1 linkage lignin dimer
Huang, J., He, C., Liu, C., Tong, H., Wu, L., & Wu, S. (2014) · Computational and Theoretical Chemistry · doi:10.1016/j.comptc.2014.12.007 · Cited by 42
Ma, Z., Ghosh, A., Asthana, N., & van Bokhoven, J. (2017) · ChemCatChem · doi:10.1002/cctc.201601674 · Cited by 41
Hu, J., Shen, D., Wu, S., & Xiao, R. (2017) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2017.07.005 · Cited by 41
Fan, L., Song, H., Lu, Q., Leng, L., Li, K., Liu, Y., Wang, Y., Chen, P. L., Ruan, R. R., & Zhou, W. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.05.012 · Cited by 42
Structural characterization of Chinese quince fruit lignin pretreated with enzymatic hydrolysis
Qin, Z., Wang, X., Liu, H., Wang, D., & Qin, G. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.04.072 · Cited by 40
Du, L., Wang, Z., Li, S., Song, W., & Lin, W. (2013) · International Journal of Chemical Reactor Engineering · doi:10.1515/ijcre-2012-0085 · Cited by 40
“[3] investigated lignin pyrolysis by using Pyrolysis gas chromatography mass spectrometry (PyGCMS) over a temperature range of 400–800°C and obtained a maximum yield of phenolic compounds at 600°C.”
MethodRasaq, W. A., Okpala, C. O. R., Igwegbe, C. A., & Białowiec, A. (2024) · Materials · doi:10.3390/ma17030725 · Cited by 38
“Greater pyrolysis temperatures aided in the production of a more resistant constitution and crystal structure, allowing it to be used as a material [133]; this was based on the principle that reactors have been classified [107].”
BackgroundResultInfluentialNeumann, G. T., Pimentel, B. R., Rensel, D. J., & Hicks, J. C. (2014) · Catalysis Science & Technology · doi:10.1039/c4cy00569d · Cited by 42
Zhang, M., & Moutsoglou, A. (2014) · Energy & Fuels · doi:10.1021/ef401795z · Cited by 41
Romanías, M. N., Coggon, M. M., Ali, F. A., Burkholder, J. B., Dagaut, P., Decker, Z. C. J., Warneke, C., Stockwell, C. E., Roberts, J. M., Tomas, A., et al. (2024) · ACS Earth and Space Chemistry · doi:10.1021/acsearthspacechem.3c00226 · Cited by 38
Jeong, J.-Y., Lee, U.-D., Chang, W.-S., & Jeong, S.-H. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.07.107 · Cited by 37
Janković, B. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.07.080 · Cited by 36
Heigenmoser, A., Liebner, F. W., Windeisen, E., & Richter, K. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.12.005 · Cited by 36
Revealing G-lignin model compounds pyrolysis behavior: β-O-4 and 5-5′ dimer and trimer
Wang, L., Yin, J., Jiang, J., Zhang, Y., Song, M., Zhang, R., Dong, Z., Yang, H., & Yu, H. (2022) · Fuel · doi:10.1016/j.fuel.2022.123531 · Cited by 35
Production of phenol-rich bio-oil via a two-stage pyrolysis of wood
Güzelçiftçi, B., Park, K.-B., & Kim, J.-S. (2020) · Energy · doi:10.1016/j.energy.2020.117536 · Cited by 34
Wang, L., Fang, Y., Yin, J., Li, X., Jiang, J., Zhang, Y., & Yang, H. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.156395 · Cited by 34
Radical footprinting and regularity revealing during the pyrolysis of technical lignins
Fan, Y., Zhang, Z., Wang, Z., Yu, H., Kong, X., Li, P., Li, M., Xiao, R., & Liu, C. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.127648 · Cited by 32
Duan, D., Wang, Y., Ruan, R. R., Tayier, M., Dai, L., Zhao, Y., Zhou, Y., & Liu, Y. (2017) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2017.10.023 · Cited by 32
Modak, S., Katiyar, P., Yadav, S., Jain, S., Gole, B., & Talukdar, D. (2023) · Waste Management · doi:10.1016/j.wasman.2023.01.002 · Cited by 33
Yu, X., Yin, J., Wang, K., Shen, D., Long, Y., & Chen, T. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b00077 · Cited by 32
A theoretical research on pyrolysis reactions mechanism of coumarone-contained lignin model compound
Huang, J., He, C., Pan, G., & Tong, H. (2016) · Computational and Theoretical Chemistry · doi:10.1016/j.comptc.2016.07.016 · Cited by 32
The Influence of Zeolites on Radical Formation During Lignin Pyrolysis
Bährle, C., Custodis, V. B. F., Jeschke, G., van Bokhoven, J. A., & Vogel, F. (2016) · ChemSusChem · doi:10.1002/cssc.201600582 · Cited by 33
Apricot kernel shells pyrolysis controlled by non-isothermal simultaneous thermal analysis (STA)
Manić, N. G., Janković, B., Radovanović, M. P., Waisi, H., Dodevski, V. M., Stojiljkovic, D. D., & Jovanović, V. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-09307-5 · Cited by 33
Structural changes of chars produced from fast pyrolysis of lignin at 100–300 °C
Chua, Y. W., Yu, Y., & Wu, H. (2019) · Fuel · doi:10.1016/j.fuel.2019.115754 · Cited by 31
Chen, W., Luo, M., Yang, K., Zhang, D., & Zhou, X. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124534 · Cited by 32
Nde, D. B., Muley, P. D., Sabliov, C. M., Nokes, S. E., & Boldor, D. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113754 · Cited by 33
Aqueous foam synergistically stabilized by the composite of lignin nanoparticles and surfactant
Fan, X., Guan, X., Zhang, M., Liu, Y., & Li, Y. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.128727 · Cited by 31
Wang, J., Zhang, B., Aldeen, A. S., Mwenya, S., Cheng, H., Xu, Z., & Zhang, H. (2022) · Bioresource Technology · doi:10.1016/j.biortech.2022.127450 · Cited by 31
Response surface method for optimization of phenolic compounds production by lignin pyrolysis
Jung, K. A., Nam, C. W., Woo, S. H., & Park, J. M. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.06.011 · Cited by 31
The role of inorganic sulfur compounds in the pyrolysis of Kraft lignin
Dondi, D., Zeffiro, A., Speltini, A., Tomasi, C., Vadivel, D., & Buttafava, A. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.02.002 · Cited by 30
Sun, Y., & Xue, B. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.07.029 · Cited by 30
Ren, X., Cai, H., Zhang, Q., Zhang, D., & Lin, X. (2020) · Energy · doi:10.1016/j.energy.2020.118799 · Cited by 30
Zhang, Z., Li, Z., Zhang, H., Ma, C., Zhang, Z., Xie, Y., Liu, S., Wang, Q., & Pittman, C. U. (2022) · Fuel Processing Technology · doi:10.1016/j.fuproc.2022.107382 · Cited by 31
Noncatalytic hydropyrolysis of lignin in a high pressure micro-pyrolyzer
Wang, H., Tan, L., Su, J., Miao, K., & Wang, K. (2022) · Fuel Processing Technology · doi:10.1016/j.fuproc.2022.107289 · Cited by 30
Feng, Y., Bu, T., Zhang, Q., Han, M., Tang, Z., Yuan, G., Chen, D., & Hu, Y. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105729 · Cited by 30
Effect of pyrolysis temperature on the pyrolytic degradation mechanism of β-aryl ether linkages
Akazawa, M., Kojima, Y., & Kato, Y. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.02.001 · Cited by 32
Ledesma, E. B., Campos, C., Cranmer, D. J., Foytik, B. L., Ton, M. N., Dixon, E. A., Chirino, C., Batamo, S., & Roy, P. (2013) · Energy & Fuels · doi:10.1021/ef3018332 · Cited by 30
Kinetic Investigations of Kraft Lignin Pyrolysis
Adam, M., Ocone, R., Mohammad, J., Berruti, F., & Briens, C. L. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400979x · Cited by 29
A Density Functional Theory Study on Pyrolysis Mechanism of Lignin in Hydrogen Plasma
Huang, X., Cheng, D., Chen, F., & Zhan, X. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie401974j · Cited by 29
Lei, M., Wu, S., Liu, C., Liang, J., & Xiao, R. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106812 · Cited by 28
Application of industrial solid wastes in catalytic pyrolysis
Qiu, B., Deng, N., Zhang, Y., & Wan, H. (2017) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.2150 · Cited by 30
Detailed kinetic modeling of thermal decomposition of guaiacol – A model compound for biomass lignin
Nguyen, T. T. P., Mai, T. V. ‐., & Huynh, L. K. (2018) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2018.02.006 · Cited by 28
Wang, Y., Jorga, S., & Abbatt, J. P. D. (2023) · ACS Earth and Space Chemistry · doi:10.1021/acsearthspacechem.2c00396 · Cited by 27
Jiang, W., Chu, J., Wu, S., & Lucia, L. A. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.01.001 · Cited by 28
Thermal Decompositions of the Lignin Model Compounds: Salicylaldehyde and Catechol
Ormond, T. K., Baraban, J. H., Porterfield, J. P., Scheer, A. M., Hemberger, P., Troy, T. P., Ahmed, M., Nimlos, M. R., Robichaud, D. J., Daily, J. W., et al. (2018) · The Journal of Physical Chemistry A · doi:10.1021/acs.jpca.8b03201 · Cited by 27
Guo, G., Liu, X., Li, R., Li, Q., Yu, H., & Li, M. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.104665 · Cited by 26
Thermal degradation of lignins fractionated by gradient acid precipitation
Cao, X., Shao, L., Huang, W., Wang, C., Mao, J., Xu, F., & Zhang, X. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105200 · Cited by 25
Khanh Tran, Q., Vu Ly, H., Tae Hwang, H., Kim, J., & Kim, S.-S. (2022) · Fuel · doi:10.1016/j.fuel.2022.125472 · Cited by 25
Ma, S.-W., Zhang, G., Li, H., Zhang, Z.-X., Li, K., & Lü, Q. (2020) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-020-00799-7 · Cited by 26
“All these phenomena were closely related to the enhanced demethoxylation reactions at high temperatures [47].”
BackgroundCharacterization of Endocarp Biomass and Extracted Lignin Using Pyrolysis and Spectroscopic Methods
Harman-Ware, A. E., Crocker, M., Pace, R. B., Placido, A., Morton, S. A., & DeBolt, S. (2014) · BioEnergy Research · doi:10.1007/s12155-014-9526-5 · Cited by 27
“The properties of pyrolysis oil, otherwise known as biooil, are dependent on the composition of the starting feedstock and the pyrolysis conditions applied [5–8].”
MethodMolecular modelling approach to elucidate the thermal decomposition routes of vanillin
Verma, A. M., & Kishore, N. (2017) · New Journal of Chemistry · doi:10.1039/c7nj02004j · Cited by 25
Kinetic Modeling of Cellulose Fractional Pyrolysis
Bennadji, H., Khachatryan, L., & Lomnicki, S. M. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03078 · Cited by 27
Co-pyrolysis of oil palm trunk and polypropylene: Pyrolysis oil composition and formation mechanism
Terry, L. M., Wee, M. X. J., Chew, J. J., Khaerudini, D. S., Timuda, G. E., Aqsha, A., Saptoro, A., & Sunarso, J. (2022) · South African Journal of Chemical Engineering · doi:10.1016/j.sajce.2022.12.001 · Cited by 28
“The production of phenolic compounds was mainly from the lignin decomposition, which began via the cleavage of ether bonds (i.e., β -O-4 and α -O-4 bonds) to form the lignin monomers (i.e., guaiacols and syringols) (Jiang et al., 2010).”
Experimental and Kinetic Study on Lignin Depolymerization in Water/Formic Acid System
Wang, Q., Guan, S., & Shen, D. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18102082 · Cited by 24
“The chromatographic peaks were identified according to the National Institute of Standards and Technology (NIST) MS library, as well as previously published works [2,20,21].”
MethodWu, S., Shen, D., Hu, J., Zhang, H., & Xiao, R. (2014) · BioResources · doi:10.15376/biores.9.2.2259-2273 · Cited by 22
“…2011a; Wu et al. 2013; Yang et al. 2007), hemicellulose (Lv et al. 2010; Patwardhan et al. 2011a; Shen et al. 2010a; Wang et al. 2013; Yang et al. 2007), and lignin (Chu et al. 2013; Ferdous et al. 2002; Hu et al. 2012; Jiang et al. 2010; Patwardhan et al. 2011b; Shen et al. 2010b)) have been done.”
BackgroundTerry, L. M., Wee, M. X. J., Chew, J. J., Khaerudini, D. S., Darsono, N., Aqsha, A., Saptoro, A., & Sunarso, J. (2023) · Environmental Research · doi:10.1016/j.envres.2023.115550 · Cited by 22
Yamaguchi, A., Watanabe, T., Saito, K., Kuwano, S., Murakami, Y., Mimura, N., & Sato, O. (2019) · Molecular Catalysis · doi:10.1016/j.mcat.2019.110557 · Cited by 23
Production of Benzene from Lignin through Current Enhanced Catalytic Conversion
Wu, X., Fan, M., & Li, Q. (2017) · Chinese Journal of Chemical Physics · doi:10.1063/1674-0068/30/cjcp1603052 · Cited by 22
Pyrolytic Interactions in Biomass: A Review Across Molecular, Component, and Feedstock Scales
Jia, W., Zhang, H., Liu, B., Xiao, J., Yang, H., & Chen, H. (2025) · Energy & Fuels · doi:10.1021/acs.energyfuels.5c04140 · Cited by 21
Density functional study on the thermal stabilities of phenolic bio-oil compounds
Shaw, A., & Zhang, X. (2019) · Fuel · doi:10.1016/j.fuel.2019.115732 · Cited by 21
“[49] reported that the total yield and relative concentrations of 366 methoxy phenols was reduced at the higher reaction temperature of 800 C.”
BackgroundLignin Depolymerization in the Presence of Base, Hydrogenation Catalysts, and Ethanol
Romanenko, I., Kurz, F., Baumgarten, R., Jevtovikj, I., Lindner, J.-P. B., Kundu, A., Kindler, A., & Schunk, S. A. (2022) · Catalysts · doi:10.3390/catal12020158 · Cited by 24
A Review of Lignin Chemistry and its Biorefining Conversion Technologies
Rana, R., Sonil, N., Meda, V., Dalai, A. K., & Koziński, J. A. (2018) · Cited by 27
Ramachandran, V., Ismail, F. S., Noor, M. J. M. M., Akhir, F. N. M., Othman, N., Zakaria, Z., & Hara, H. (2020) · Bioresource Technology Reports · doi:10.1016/j.biteb.2020.100456 · Cited by 21
Heterogeneous Catalysis as a Tool for Production of Aromatic Compounds From Lignin
Awan, I. Z., Tanchoux, N., Quignard, F., Albonetti, S., Cavani, F., & Renzo, F. D. (2019) · Studies in surface science and catalysis · doi:10.1016/b978-0-444-64127-4.00013-6 · Cited by 24
“CdCbondis thestrongestbondinmanytransformations, its breaking only occurring at very high temperatures [35].”
BackgroundBallice, L., Sert, M., Sağlam, M., & Yüksel, M. (2020) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-020-04594-4 · Cited by 20
“The relevant literature about the three basic components of a biomass in pyrolysis includes many studies on the model components of the biomass structural units such as xylan, cellulose, and lignin (Sigma-Aldrich Chemie GmbH) [6], Alcell lignin [7], kraft lignin [8], cellulose (Toyoroshi Co.”
BackgroundRecent progress in microwave-assisted lignin conversion
Luo, Z., Cao, D., Jiang, P., Chen, J., Ji, T., Han, L. G., Lü, X., Mu, L., & Zhu, J. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115855 · Cited by 21
Structure and Monomer Ratio of Lignin in C3H and HCT RNAi Transgenic Poplar Saplings
Zhou, X., Yang, S., Lu, M., Zhao, S., Cai, L., Zhang, Y., Zhao, R., & Lv, J. (2020) · ChemistrySelect · doi:10.1002/slct.202000365 · Cited by 19
Metadata
- Authors
- Jiang, G., Nowakowski, D. J., & Bridgwater, A. V.
- Affiliations
- Aston University (GB)
- Corresponding author
- Jiang, Guozhan
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-07-21
- Volume
- 24
- Issue
- 8
- Pages
- 4470-4475
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2011032908
- Cited by
- 332
- References
- 22
- Citations by year
- 2026: 12 · 2025: 20 · 2024: 13 · 2023: 17 · 2022: 35 · 2021: 18 · 2020: 27 · 2019: 25 · 2018: 29 · 2017: 28 · 2016: 27 · 2015: 16 · 2014: 25 · 2013: 17 · 2012: 10
- FWCI
- 7.55
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Fuels (publishedVersion)
- Funders
- Engineering and Physical Sciences Research Council (EP/E039995/1)
- Topics
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Energy › Fuel Technology › Coal Properties and Utilization
- Keywords
- lignin pyrolysis, pyrolysis temperature, Alcell lignin, phenolic compounds, 2-methoxy-4-vinylphenol, pyrolysis product composition
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.